@@ -55,3 +55,22 @@ CONFIG_ROOT_NFS=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_MTD=y
+CONFIG_MTD_OF_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_PHYSMAP_OF=y
This board has soldered on flash, and a SODIMM flash module. Both can be used for booting, via switching JP12 and SW2.8 and using the sbc8548-altflash.dts when booting from SODIMM. Here we enable MTD in kernel so that we can see the bootloader (and other flash sectors) from linux. Normal configuration: root@sbc8548:~# cat /proc/mtd dev: size erasesize name mtd0: 007a0000 00020000 "space" mtd1: 00060000 00020000 "bootloader" mtd2: 03f00000 00080000 "space" mtd3: 00100000 00080000 "bootloader" root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C 1+0 records in 1+0 records out 00000000 27 05 19 56 55 2d 42 6f 6f 74 20 32 30 31 32 2e |'..VU-Boot 2012.| 00000010 31 30 2d 64 69 72 74 79 20 28 4a 61 6e 20 31 39 |10-dirty (Jan 19| 00000020 20 32 30 31 33 20 2d 20 31 39 3a 34 30 3a 31 31 | 2013 - 19:40:11| 00000030 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C 1+0 records in 1+0 records out 00000000 27 05 19 56 55 2d 42 6f 6f 74 20 32 30 31 32 2e |'..VU-Boot 2012.| 00000010 31 30 2d 64 69 72 74 79 20 28 44 65 63 20 31 33 |10-dirty (Dec 13| 00000020 20 32 30 31 32 20 2d 20 31 35 3a 30 30 3a 30 37 | 2012 - 15:00:07| 00000030 root@sbc8548:~# Alternate configuration, with sbc8548-altflash.dts: root@sbc8548:~# cat /proc/mtd dev: size erasesize name mtd0: 03f00000 00080000 "space" mtd1: 00100000 00080000 "bootloader" mtd2: 007a0000 00020000 "space" mtd3: 00060000 00020000 "bootloader" root@sbc8548:~# dd if=/dev/mtd1 count=1 bs=48|hexdump -C 1+0 records in 1+0 records out 00000000 27 05 19 56 55 2d 42 6f 6f 74 20 32 30 31 32 2e |'..VU-Boot 2012.| 00000010 31 30 2d 64 69 72 74 79 20 28 44 65 63 20 31 33 |10-dirty (Dec 13| 00000020 20 32 30 31 32 20 2d 20 31 35 3a 30 30 3a 30 37 | 2012 - 15:00:07| 00000030 root@sbc8548:~# dd if=/dev/mtd3 count=1 bs=48|hexdump -C 1+0 records in 1+0 records out 00000000 27 05 19 56 55 2d 42 6f 6f 74 20 32 30 31 32 2e |'..VU-Boot 2012.| 00000010 31 30 2d 64 69 72 74 79 20 28 4a 61 6e 20 31 39 |10-dirty (Jan 19| 00000020 20 32 30 31 33 20 2d 20 31 39 3a 34 30 3a 31 31 | 2013 - 19:40:11| 00000030 root@sbc8548:~# Note that in the latter, the larger SODIMM device appears 1st, as mtd0 and mtd1, as indicated in the sizes, and in the date of the u-boot image. The kernel configuration is the same in both cases; only the dtb needs to be changed in accordance with the JP12/SW2.8 settings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> --- arch/powerpc/configs/85xx/sbc8548_defconfig | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)