Message ID | 1324571123-11577-1-git-send-email-Kyle.D.Moffett@boeing.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
On Wed, 2012-01-04 at 15:22 -0800, Randy Dunlap wrote: > On 12/22/2011 08:25 AM, Kyle Moffett wrote: > > The MPIC code checks for a "big-endian" property and sets the flag > > MPIC_BIG_ENDIAN if one is present. Unfortunately, the PowerQUICC-III > > compatible device-tree does not specify it, so all of the board ports > > need to manually set that flag when calling mpic_alloc(). > > > > Document the flag and add it to the pq3 device tree. Existing code > > will still need to pass the MPIC_BIG_ENDIAN flag because their dtb may > > not have this property, but new platforms shouldn't need to do so. > > > > Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> > > Grant, are you merging this patch? > I don't think I should merge the patch to arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi. Best is to leave the whole lot to me. It's not like mpic is used anywhere else ... Cheers, Ben. > > -- > > .../devicetree/bindings/powerpc/fsl/mpic.txt | 9 ++++++++- > > arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 1 + > > 2 files changed, 9 insertions(+), 1 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > > index 2cf38bd..ebafba2 100644 > > --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > > +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > > @@ -56,7 +56,14 @@ PROPERTIES > > to the client. The presence of this property also mandates > > that any initialization related to interrupt sources shall > > be limited to sources explicitly referenced in the device tree. > > - > > + > > + - big-endian > > + Usage: optional > > + Value type: <empty> > > + If present the MPIC will be assumed to be big-endian. Some > > + device-trees omit this property on MPIC nodes even when the MPIC is > > + in fact big-endian, so certain boards override this property. > > + > > INTERRUPT SPECIFIER DEFINITION > > > > Interrupt specifiers consists of 4 cells encoded as > > diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > > index 5c80460..47f2b67 100644 > > --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > > +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > > @@ -39,6 +39,7 @@ mpic: pic@40000 { > > reg = <0x40000 0x40000>; > > compatible = "fsl,mpic"; > > device_type = "open-pic"; > > + big-endian; > > }; > > > > timer@41100 { > >
On 12/22/2011 08:25 AM, Kyle Moffett wrote: > The MPIC code checks for a "big-endian" property and sets the flag > MPIC_BIG_ENDIAN if one is present. Unfortunately, the PowerQUICC-III > compatible device-tree does not specify it, so all of the board ports > need to manually set that flag when calling mpic_alloc(). > > Document the flag and add it to the pq3 device tree. Existing code > will still need to pass the MPIC_BIG_ENDIAN flag because their dtb may > not have this property, but new platforms shouldn't need to do so. > > Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Grant, are you merging this patch? I don't think I should merge the patch to arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi. > --- > .../devicetree/bindings/powerpc/fsl/mpic.txt | 9 ++++++++- > arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 1 + > 2 files changed, 9 insertions(+), 1 deletions(-) > > diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > index 2cf38bd..ebafba2 100644 > --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt > @@ -56,7 +56,14 @@ PROPERTIES > to the client. The presence of this property also mandates > that any initialization related to interrupt sources shall > be limited to sources explicitly referenced in the device tree. > - > + > + - big-endian > + Usage: optional > + Value type: <empty> > + If present the MPIC will be assumed to be big-endian. Some > + device-trees omit this property on MPIC nodes even when the MPIC is > + in fact big-endian, so certain boards override this property. > + > INTERRUPT SPECIFIER DEFINITION > > Interrupt specifiers consists of 4 cells encoded as > diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > index 5c80460..47f2b67 100644 > --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi > @@ -39,6 +39,7 @@ mpic: pic@40000 { > reg = <0x40000 0x40000>; > compatible = "fsl,mpic"; > device_type = "open-pic"; > + big-endian; > }; > > timer@41100 {
On Dec 22, 2011, at 10:25 AM, Kyle Moffett wrote: > The MPIC code checks for a "big-endian" property and sets the flag > MPIC_BIG_ENDIAN if one is present. Unfortunately, the PowerQUICC-III > compatible device-tree does not specify it, so all of the board ports > need to manually set that flag when calling mpic_alloc(). > > Document the flag and add it to the pq3 device tree. Existing code > will still need to pass the MPIC_BIG_ENDIAN flag because their dtb may > not have this property, but new platforms shouldn't need to do so. > > Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> > --- > .../devicetree/bindings/powerpc/fsl/mpic.txt | 9 ++++++++- > arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 1 + > 2 files changed, 9 insertions(+), 1 deletions(-) need to update arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi - k
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt index 2cf38bd..ebafba2 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic.txt @@ -56,7 +56,14 @@ PROPERTIES to the client. The presence of this property also mandates that any initialization related to interrupt sources shall be limited to sources explicitly referenced in the device tree. - + + - big-endian + Usage: optional + Value type: <empty> + If present the MPIC will be assumed to be big-endian. Some + device-trees omit this property on MPIC nodes even when the MPIC is + in fact big-endian, so certain boards override this property. + INTERRUPT SPECIFIER DEFINITION Interrupt specifiers consists of 4 cells encoded as diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index 5c80460..47f2b67 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -39,6 +39,7 @@ mpic: pic@40000 { reg = <0x40000 0x40000>; compatible = "fsl,mpic"; device_type = "open-pic"; + big-endian; }; timer@41100 {
The MPIC code checks for a "big-endian" property and sets the flag MPIC_BIG_ENDIAN if one is present. Unfortunately, the PowerQUICC-III compatible device-tree does not specify it, so all of the board ports need to manually set that flag when calling mpic_alloc(). Document the flag and add it to the pq3 device tree. Existing code will still need to pass the MPIC_BIG_ENDIAN flag because their dtb may not have this property, but new platforms shouldn't need to do so. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> --- .../devicetree/bindings/powerpc/fsl/mpic.txt | 9 ++++++++- arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi | 1 + 2 files changed, 9 insertions(+), 1 deletions(-)