diff mbox

powerpc/p1022ds: Remove fixed-link property from ethernet nodes.

Message ID 1310024270-2675-1-git-send-email-felix@embedded-sol.com (mailing list archive)
State Accepted, archived
Commit f6ad160e6f4f4d6933eeb82a2bfa25ea008585f0
Headers show

Commit Message

Felix Radensky July 7, 2011, 7:37 a.m. UTC
On P1022DS both ethernet controllers are connected to RGMII PHYs
accessible via MDIO bus. Remove fixed-link property from ethernet
nodes as they only required when fixed link PHYs without MDIO bus
are used.

Signed-off-by: Felix Radensky <felix@embedded-sol.com>
---
 arch/powerpc/boot/dts/p1022ds.dts |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)

Comments

Timur Tabi July 7, 2011, 4:05 p.m. UTC | #1
Felix Radensky wrote:
> On P1022DS both ethernet controllers are connected to RGMII PHYs
> accessible via MDIO bus. Remove fixed-link property from ethernet
> nodes as they only required when fixed link PHYs without MDIO bus
> are used.
> 
> Signed-off-by: Felix Radensky <felix@embedded-sol.com>

Acked-by: Timur Tabi <timur@freescale.com>

Ethernet works before and after applying this patch, so all I can say is that it
doesn't break anything.
Kumar Gala July 8, 2011, 4:12 a.m. UTC | #2
On Jul 7, 2011, at 2:37 AM, Felix Radensky wrote:

> On P1022DS both ethernet controllers are connected to RGMII PHYs
> accessible via MDIO bus. Remove fixed-link property from ethernet
> nodes as they only required when fixed link PHYs without MDIO bus
> are used.
> 
> Signed-off-by: Felix Radensky <felix@embedded-sol.com>
> ---
> arch/powerpc/boot/dts/p1022ds.dts |    2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)

applied to next
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 98d9426..1be9743 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -412,7 +412,6 @@ 
 			fsl,magic-packet;
 			fsl,wake-on-filer;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			fixed-link = <1 1 1000 0 0>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 			queue-group@0{
@@ -439,7 +438,6 @@ 
 			fsl,num_rx_queues = <0x8>;
 			fsl,num_tx_queues = <0x8>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			fixed-link = <1 1 1000 0 0>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
 			queue-group@0{