diff mbox

[-mm,1/2] RapidIO: Fix maximum port number in tsi57x EM initialization

Message ID 1287410600-24783-1-git-send-email-alexandre.bounine@idt.com (mailing list archive)
State Not Applicable
Delegated to: Kumar Gala
Headers show

Commit Message

Bounine, Alexandre Oct. 18, 2010, 2:03 p.m. UTC 
Replace hardcoded maximum port number with actual reported number of
switch ports.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
---
 drivers/rapidio/switches/tsi57x.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index d9e9492..2003fb6 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -166,7 +166,8 @@  tsi57x_em_init(struct rio_dev *rdev)
 
 	pr_debug("TSI578 %s [%d:%d]\n", __func__, destid, hopcount);
 
-	for (portnum = 0; portnum < 16; portnum++) {
+	for (portnum = 0;
+	     portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) {
 		/* Make sure that Port-Writes are enabled (for all ports) */
 		rio_mport_read_config_32(mport, destid, hopcount,
 				TSI578_SP_MODE(portnum), &regval);