| Message ID | 20220629065656.54420-23-xuanzhuo@linux.alibaba.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | virtio pci support VIRTIO_F_RING_RESET | expand |
在 2022/6/29 14:56, Xuan Zhuo 写道: > Introduce virtqueue_resize() to implement the resize of vring. > Based on these, the driver can dynamically adjust the size of the vring. > For example: ethtool -G. > > virtqueue_resize() implements resize based on the vq reset function. In > case of failure to allocate a new vring, it will give up resize and use > the original vring. > > During this process, if the re-enable reset vq fails, the vq can no > longer be used. Although the probability of this situation is not high. > > The parameter recycle is used to recycle the buffer that is no longer > used. > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > --- > drivers/virtio/virtio_ring.c | 72 ++++++++++++++++++++++++++++++++++++ > include/linux/virtio.h | 3 ++ > 2 files changed, 75 insertions(+) > > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c > index 4860787286db..5ec43607cc15 100644 > --- a/drivers/virtio/virtio_ring.c > +++ b/drivers/virtio/virtio_ring.c > @@ -2542,6 +2542,78 @@ struct virtqueue *vring_create_virtqueue( > } > EXPORT_SYMBOL_GPL(vring_create_virtqueue); > > +/** > + * virtqueue_resize - resize the vring of vq > + * @_vq: the struct virtqueue we're talking about. > + * @num: new ring num > + * @recycle: callback for recycle the useless buffer > + * > + * When it is really necessary to create a new vring, it will set the current vq > + * into the reset state. Then call the passed callback to recycle the buffer > + * that is no longer used. Only after the new vring is successfully created, the > + * old vring will be released. > + * > + * Caller must ensure we don't call this with other virtqueue operations > + * at the same time (except where noted). > + * > + * Returns zero or a negative error. > + * 0: success. > + * -ENOMEM: Failed to allocate a new ring, fall back to the original ring size. > + * vq can still work normally > + * -EBUSY: Failed to sync with device, vq may not work properly > + * -ENOENT: Transport or device not supported > + * -E2BIG/-EINVAL: num error > + * -EPERM: Operation not permitted > + * > + */ > +int virtqueue_resize(struct virtqueue *_vq, u32 num, > + void (*recycle)(struct virtqueue *vq, void *buf)) > +{ > + struct vring_virtqueue *vq = to_vvq(_vq); > + struct virtio_device *vdev = vq->vq.vdev; > + bool packed; > + void *buf; > + int err; > + > + if (!vq->we_own_ring) > + return -EPERM; > + > + if (num > vq->vq.num_max) > + return -E2BIG; > + > + if (!num) > + return -EINVAL; > + > + packed = virtio_has_feature(vdev, VIRTIO_F_RING_PACKED) ? true : false; vq->packed_ring? > + > + if ((packed ? vq->packed.vring.num : vq->split.vring.num) == num) > + return 0; > + > + if (!vdev->config->reset_vq) > + return -ENOENT; > + > + if (!vdev->config->enable_reset_vq) > + return -ENOENT; Not sure this is useful, e.g driver may choose to resize after a reset of the device? Thanks > + > + err = vdev->config->reset_vq(_vq); > + if (err) > + return err; > + > + while ((buf = virtqueue_detach_unused_buf(_vq)) != NULL) > + recycle(_vq, buf); > + > + if (packed) > + err = virtqueue_resize_packed(_vq, num); > + else > + err = virtqueue_resize_split(_vq, num); > + > + if (vdev->config->enable_reset_vq(_vq)) > + return -EBUSY; > + > + return err; > +} > +EXPORT_SYMBOL_GPL(virtqueue_resize); > + > /* Only available for split ring */ > struct virtqueue *vring_new_virtqueue(unsigned int index, > unsigned int num, > diff --git a/include/linux/virtio.h b/include/linux/virtio.h > index a82620032e43..1272566adec6 100644 > --- a/include/linux/virtio.h > +++ b/include/linux/virtio.h > @@ -91,6 +91,9 @@ dma_addr_t virtqueue_get_desc_addr(struct virtqueue *vq); > dma_addr_t virtqueue_get_avail_addr(struct virtqueue *vq); > dma_addr_t virtqueue_get_used_addr(struct virtqueue *vq); > > +int virtqueue_resize(struct virtqueue *vq, u32 num, > + void (*recycle)(struct virtqueue *vq, void *buf)); > + > /** > * virtio_device - representation of a device using virtio > * @index: unique position on the virtio bus
On Fri, 1 Jul 2022 17:31:34 +0800, Jason Wang <jasowang@redhat.com> wrote: > > 在 2022/6/29 14:56, Xuan Zhuo 写道: > > Introduce virtqueue_resize() to implement the resize of vring. > > Based on these, the driver can dynamically adjust the size of the vring. > > For example: ethtool -G. > > > > virtqueue_resize() implements resize based on the vq reset function. In > > case of failure to allocate a new vring, it will give up resize and use > > the original vring. > > > > During this process, if the re-enable reset vq fails, the vq can no > > longer be used. Although the probability of this situation is not high. > > > > The parameter recycle is used to recycle the buffer that is no longer > > used. > > > > Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> > > --- > > drivers/virtio/virtio_ring.c | 72 ++++++++++++++++++++++++++++++++++++ > > include/linux/virtio.h | 3 ++ > > 2 files changed, 75 insertions(+) > > > > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c > > index 4860787286db..5ec43607cc15 100644 > > --- a/drivers/virtio/virtio_ring.c > > +++ b/drivers/virtio/virtio_ring.c > > @@ -2542,6 +2542,78 @@ struct virtqueue *vring_create_virtqueue( > > } > > EXPORT_SYMBOL_GPL(vring_create_virtqueue); > > > > +/** > > + * virtqueue_resize - resize the vring of vq > > + * @_vq: the struct virtqueue we're talking about. > > + * @num: new ring num > > + * @recycle: callback for recycle the useless buffer > > + * > > + * When it is really necessary to create a new vring, it will set the current vq > > + * into the reset state. Then call the passed callback to recycle the buffer > > + * that is no longer used. Only after the new vring is successfully created, the > > + * old vring will be released. > > + * > > + * Caller must ensure we don't call this with other virtqueue operations > > + * at the same time (except where noted). > > + * > > + * Returns zero or a negative error. > > + * 0: success. > > + * -ENOMEM: Failed to allocate a new ring, fall back to the original ring size. > > + * vq can still work normally > > + * -EBUSY: Failed to sync with device, vq may not work properly > > + * -ENOENT: Transport or device not supported > > + * -E2BIG/-EINVAL: num error > > + * -EPERM: Operation not permitted > > + * > > + */ > > +int virtqueue_resize(struct virtqueue *_vq, u32 num, > > + void (*recycle)(struct virtqueue *vq, void *buf)) > > +{ > > + struct vring_virtqueue *vq = to_vvq(_vq); > > + struct virtio_device *vdev = vq->vq.vdev; > > + bool packed; > > + void *buf; > > + int err; > > + > > + if (!vq->we_own_ring) > > + return -EPERM; > > + > > + if (num > vq->vq.num_max) > > + return -E2BIG; > > + > > + if (!num) > > + return -EINVAL; > > + > > + packed = virtio_has_feature(vdev, VIRTIO_F_RING_PACKED) ? true : false; > > > vq->packed_ring? Will fix. > > > > + > > + if ((packed ? vq->packed.vring.num : vq->split.vring.num) == num) > > + return 0; > > + > > + if (!vdev->config->reset_vq) > > + return -ENOENT; > > + > > + if (!vdev->config->enable_reset_vq) > > + return -ENOENT; > > > Not sure this is useful, e.g driver may choose to resize after a reset > of the device? There may be some misunderstandings, this is to check whether the transport has set the callback enable_reset_vq(). Thanks. > > Thanks > > > > + > > + err = vdev->config->reset_vq(_vq); > > + if (err) > > + return err; > > + > > + while ((buf = virtqueue_detach_unused_buf(_vq)) != NULL) > > + recycle(_vq, buf); > > + > > + if (packed) > > + err = virtqueue_resize_packed(_vq, num); > > + else > > + err = virtqueue_resize_split(_vq, num); > > + > > + if (vdev->config->enable_reset_vq(_vq)) > > + return -EBUSY; > > + > > + return err; > > +} > > +EXPORT_SYMBOL_GPL(virtqueue_resize); > > + > > /* Only available for split ring */ > > struct virtqueue *vring_new_virtqueue(unsigned int index, > > unsigned int num, > > diff --git a/include/linux/virtio.h b/include/linux/virtio.h > > index a82620032e43..1272566adec6 100644 > > --- a/include/linux/virtio.h > > +++ b/include/linux/virtio.h > > @@ -91,6 +91,9 @@ dma_addr_t virtqueue_get_desc_addr(struct virtqueue *vq); > > dma_addr_t virtqueue_get_avail_addr(struct virtqueue *vq); > > dma_addr_t virtqueue_get_used_addr(struct virtqueue *vq); > > > > +int virtqueue_resize(struct virtqueue *vq, u32 num, > > + void (*recycle)(struct virtqueue *vq, void *buf)); > > + > > /** > > * virtio_device - representation of a device using virtio > > * @index: unique position on the virtio bus >
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 4860787286db..5ec43607cc15 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -2542,6 +2542,78 @@ struct virtqueue *vring_create_virtqueue( } EXPORT_SYMBOL_GPL(vring_create_virtqueue); +/** + * virtqueue_resize - resize the vring of vq + * @_vq: the struct virtqueue we're talking about. + * @num: new ring num + * @recycle: callback for recycle the useless buffer + * + * When it is really necessary to create a new vring, it will set the current vq + * into the reset state. Then call the passed callback to recycle the buffer + * that is no longer used. Only after the new vring is successfully created, the + * old vring will be released. + * + * Caller must ensure we don't call this with other virtqueue operations + * at the same time (except where noted). + * + * Returns zero or a negative error. + * 0: success. + * -ENOMEM: Failed to allocate a new ring, fall back to the original ring size. + * vq can still work normally + * -EBUSY: Failed to sync with device, vq may not work properly + * -ENOENT: Transport or device not supported + * -E2BIG/-EINVAL: num error + * -EPERM: Operation not permitted + * + */ +int virtqueue_resize(struct virtqueue *_vq, u32 num, + void (*recycle)(struct virtqueue *vq, void *buf)) +{ + struct vring_virtqueue *vq = to_vvq(_vq); + struct virtio_device *vdev = vq->vq.vdev; + bool packed; + void *buf; + int err; + + if (!vq->we_own_ring) + return -EPERM; + + if (num > vq->vq.num_max) + return -E2BIG; + + if (!num) + return -EINVAL; + + packed = virtio_has_feature(vdev, VIRTIO_F_RING_PACKED) ? true : false; + + if ((packed ? vq->packed.vring.num : vq->split.vring.num) == num) + return 0; + + if (!vdev->config->reset_vq) + return -ENOENT; + + if (!vdev->config->enable_reset_vq) + return -ENOENT; + + err = vdev->config->reset_vq(_vq); + if (err) + return err; + + while ((buf = virtqueue_detach_unused_buf(_vq)) != NULL) + recycle(_vq, buf); + + if (packed) + err = virtqueue_resize_packed(_vq, num); + else + err = virtqueue_resize_split(_vq, num); + + if (vdev->config->enable_reset_vq(_vq)) + return -EBUSY; + + return err; +} +EXPORT_SYMBOL_GPL(virtqueue_resize); + /* Only available for split ring */ struct virtqueue *vring_new_virtqueue(unsigned int index, unsigned int num, diff --git a/include/linux/virtio.h b/include/linux/virtio.h index a82620032e43..1272566adec6 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -91,6 +91,9 @@ dma_addr_t virtqueue_get_desc_addr(struct virtqueue *vq); dma_addr_t virtqueue_get_avail_addr(struct virtqueue *vq); dma_addr_t virtqueue_get_used_addr(struct virtqueue *vq); +int virtqueue_resize(struct virtqueue *vq, u32 num, + void (*recycle)(struct virtqueue *vq, void *buf)); + /** * virtio_device - representation of a device using virtio * @index: unique position on the virtio bus
Introduce virtqueue_resize() to implement the resize of vring. Based on these, the driver can dynamically adjust the size of the vring. For example: ethtool -G. virtqueue_resize() implements resize based on the vq reset function. In case of failure to allocate a new vring, it will give up resize and use the original vring. During this process, if the re-enable reset vq fails, the vq can no longer be used. Although the probability of this situation is not high. The parameter recycle is used to recycle the buffer that is no longer used. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> --- drivers/virtio/virtio_ring.c | 72 ++++++++++++++++++++++++++++++++++++ include/linux/virtio.h | 3 ++ 2 files changed, 75 insertions(+)