mbox series

[v2,00/20] mm: rework free_area_init*() funcitons

Message ID 20200429121126.17989-1-rppt@kernel.org
Headers show
Series mm: rework free_area_init*() funcitons | expand

Message

Mike Rapoport April 29, 2020, 12:11 p.m. UTC
From: Mike Rapoport <rppt@linux.ibm.com>

Hi,

After the discussion [1] about removal of CONFIG_NODES_SPAN_OTHER_NODES and
CONFIG_HAVE_MEMBLOCK_NODE_MAP options, I took it a bit further and updated
the node/zone initialization. 

Since all architectures have memblock, it is possible to use only the newer
version of free_area_init_node() that calculates the zone and node
boundaries based on memblock node mapping and architectural limits on
possible zone PFNs. 

The architectures that still determined zone and hole sizes can be switched
to the generic code and the old code that took those zone and hole sizes
can be simply removed.

And, since it all started from the removal of
CONFIG_NODES_SPAN_OTHER_NODES, the memmap_init() is now updated to iterate
over memblocks and so it does not need to perform early_pfn_to_nid() query
for every PFN.

v2 changes:
* move deletion of one of '#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP' from
  patch 2 to patch 3 where it should have been from the beginning
* drop patch that introduced a free_area_init_memoryless_node() wrapper
  for free_area_init_node()
* remove unused next_pfn(), thanks Qian
* drop stale comment in memmap_init_zone(), as per David

--
Sincerely yours,
Mike.

[1] https://lore.kernel.org/lkml/1585420282-25630-1-git-send-email-Hoan@os.amperecomputing.com

Baoquan He (1):
  mm: memmap_init: iterate over memblock regions rather that check each PFN

Mike Rapoport (19):
  mm: memblock: replace dereferences of memblock_region.nid with API calls
  mm: make early_pfn_to_nid() and related defintions close to each other
  mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option
  mm: free_area_init: use maximal zone PFNs rather than zone sizes
  mm: use free_area_init() instead of free_area_init_nodes()
  alpha: simplify detection of memory zone boundaries
  arm: simplify detection of memory zone boundaries
  arm64: simplify detection of memory zone boundaries for UMA configs
  csky: simplify detection of memory zone boundaries
  m68k: mm: simplify detection of memory zone boundaries
  parisc: simplify detection of memory zone boundaries
  sparc32: simplify detection of memory zone boundaries
  unicore32: simplify detection of memory zone boundaries
  xtensa: simplify detection of memory zone boundaries
  mm: remove early_pfn_in_nid() and CONFIG_NODES_SPAN_OTHER_NODES
  mm: free_area_init: allow defining max_zone_pfn in descending order
  mm: clean up free_area_init_node() and its helpers
  mm: simplify find_min_pfn_with_active_regions()
  docs/vm: update memory-models documentation

 .../vm/numa-memblock/arch-support.txt         |  34 ---
 Documentation/vm/memory-model.rst             |   9 +-
 arch/alpha/mm/init.c                          |  16 +-
 arch/alpha/mm/numa.c                          |  22 +-
 arch/arc/mm/init.c                            |  36 +--
 arch/arm/mm/init.c                            |  66 +----
 arch/arm64/Kconfig                            |   1 -
 arch/arm64/mm/init.c                          |  56 +---
 arch/arm64/mm/numa.c                          |   9 +-
 arch/c6x/mm/init.c                            |   8 +-
 arch/csky/kernel/setup.c                      |  26 +-
 arch/h8300/mm/init.c                          |   6 +-
 arch/hexagon/mm/init.c                        |   6 +-
 arch/ia64/Kconfig                             |   1 -
 arch/ia64/mm/contig.c                         |   2 +-
 arch/ia64/mm/discontig.c                      |   2 +-
 arch/m68k/mm/init.c                           |   6 +-
 arch/m68k/mm/mcfmmu.c                         |   9 +-
 arch/m68k/mm/motorola.c                       |  15 +-
 arch/m68k/mm/sun3mmu.c                        |  10 +-
 arch/microblaze/Kconfig                       |   1 -
 arch/microblaze/mm/init.c                     |   2 +-
 arch/mips/Kconfig                             |   1 -
 arch/mips/loongson64/numa.c                   |   2 +-
 arch/mips/mm/init.c                           |   2 +-
 arch/mips/sgi-ip27/ip27-memory.c              |   2 +-
 arch/nds32/mm/init.c                          |  11 +-
 arch/nios2/mm/init.c                          |   8 +-
 arch/openrisc/mm/init.c                       |   9 +-
 arch/parisc/mm/init.c                         |  22 +-
 arch/powerpc/Kconfig                          |  10 -
 arch/powerpc/mm/mem.c                         |   2 +-
 arch/riscv/Kconfig                            |   1 -
 arch/riscv/mm/init.c                          |   2 +-
 arch/s390/Kconfig                             |   1 -
 arch/s390/mm/init.c                           |   2 +-
 arch/sh/Kconfig                               |   1 -
 arch/sh/mm/init.c                             |   2 +-
 arch/sparc/Kconfig                            |  10 -
 arch/sparc/mm/init_64.c                       |   2 +-
 arch/sparc/mm/srmmu.c                         |  21 +-
 arch/um/kernel/mem.c                          |  12 +-
 arch/unicore32/include/asm/memory.h           |   2 +-
 arch/unicore32/include/mach/memory.h          |   6 +-
 arch/unicore32/kernel/pci.c                   |  14 +-
 arch/unicore32/mm/init.c                      |  43 +--
 arch/x86/Kconfig                              |  10 -
 arch/x86/mm/init.c                            |   2 +-
 arch/x86/mm/numa.c                            |   8 +-
 arch/xtensa/mm/init.c                         |   8 +-
 include/linux/memblock.h                      |   8 +-
 include/linux/mm.h                            |  28 +-
 include/linux/mmzone.h                        |  11 +-
 mm/Kconfig                                    |   3 -
 mm/memblock.c                                 |  19 +-
 mm/memory_hotplug.c                           |   4 -
 mm/page_alloc.c                               | 278 ++++++------------
 57 files changed, 243 insertions(+), 667 deletions(-)
 delete mode 100644 Documentation/features/vm/numa-memblock/arch-support.txt