diff mbox

[v5,2/3] regulator: tps6586x: add and use correct voltage table

Message ID 7c948660cda4684d28fa97f82295ab84f6ef658e.1386333697.git.stefan@agner.ch
State Not Applicable, archived
Headers show

Commit Message

Stefan Agner Dec. 6, 2013, 12:51 p.m. UTC 
Depending on the regulator version, the voltage table might be
different. Use version specific regulator tables in order to select
correct voltage table. For the following regulator versions different
voltage tables are now used:

  * TPS658623: Use correct voltage table for SM2
  * TPS658643: New voltage table for SM2

Both versions are in use on the Colibri T20 module. Make use of the
correct tables by requesting the correct SM2 voltage of 1.8V.

This change is not backward compatible since an old driver is not able
to correctly set that value. The value 1.8V is out of range for the old
driver and will refuse to probe the device. The regulator starts with
default settings and the driver shows appropriate error messages.

On Colibri T20, the old value used to work with TPS658623 since the
driver applied a wrong voltage table too. However, the TPS658643 used
on V1.2 devices uses yet another voltage table and those broke that
pseudo-compatibility. The regulator driver now has the correct voltage
table for both regulator versions and those the correct voltage can be
used in the device tree.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
Changes since v3:
  - Check if version specific table is necessary

Changes since v2:
  - Removed reg_ from reg_version
  - Moved walk through version dependent tables to find_regulator_info,
    removed the inline definition. This reduces .o size and encapsulates
    the logic of finding the right regulator into one function. It comes
    with a slight code duplication, the table search now appears twice.
---
 arch/arm/boot/dts/tegra20-colibri-512.dtsi |  4 +-
 drivers/regulator/tps6586x-regulator.c     | 93 ++++++++++++++++++++++++------
 2 files changed, 76 insertions(+), 21 deletions(-)

Comments

Mark Brown Dec. 6, 2013, 12:55 p.m. UTC | #1 
On Fri, Dec 06, 2013 at 01:51:46PM +0100, Stefan Agner wrote:
> Depending on the regulator version, the voltage table might be
> different. Use version specific regulator tables in order to select
> correct voltage table. For the following regulator versions different
> voltage tables are now used:

I think this is the same as the last patch I reviewed but I don't see my
ack on it?
Stefan Agner Dec. 6, 2013, 2:57 p.m. UTC | #2 
Am 2013-12-06 13:55, schrieb Mark Brown:
> On Fri, Dec 06, 2013 at 01:51:46PM +0100, Stefan Agner wrote:
>> Depending on the regulator version, the voltage table might be
>> different. Use version specific regulator tables in order to select
>> correct voltage table. For the following regulator versions different
>> voltage tables are now used:
> 
> I think this is the same as the last patch I reviewed but I don't see my
> ack on it?

Oh sorry, its my first multi-revision submission. I didn't realized that
it is my job to add them when doing a new revision... Lee, can you add
that when you apply the patch? So far I see

Acked-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>

for this patch.
--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lee Jones Dec. 6, 2013, 3:40 p.m. UTC | #3 
On Fri, 06 Dec 2013, Stefan Agner wrote:

> Depending on the regulator version, the voltage table might be
> different. Use version specific regulator tables in order to select
> correct voltage table. For the following regulator versions different
> voltage tables are now used:
> 
>   * TPS658623: Use correct voltage table for SM2
>   * TPS658643: New voltage table for SM2
> 
> Both versions are in use on the Colibri T20 module. Make use of the
> correct tables by requesting the correct SM2 voltage of 1.8V.
> 
> This change is not backward compatible since an old driver is not able
> to correctly set that value. The value 1.8V is out of range for the old
> driver and will refuse to probe the device. The regulator starts with
> default settings and the driver shows appropriate error messages.
> 
> On Colibri T20, the old value used to work with TPS658623 since the
> driver applied a wrong voltage table too. However, the TPS658643 used
> on V1.2 devices uses yet another voltage table and those broke that
> pseudo-compatibility. The regulator driver now has the correct voltage
> table for both regulator versions and those the correct voltage can be
> used in the device tree.
> 
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> Changes since v3:
>   - Check if version specific table is necessary
> 
> Changes since v2:
>   - Removed reg_ from reg_version
>   - Moved walk through version dependent tables to find_regulator_info,
>     removed the inline definition. This reduces .o size and encapsulates
>     the logic of finding the right regulator into one function. It comes
>     with a slight code duplication, the table search now appears twice.
> ---
>  arch/arm/boot/dts/tegra20-colibri-512.dtsi |  4 +-
>  drivers/regulator/tps6586x-regulator.c     | 93 ++++++++++++++++++++++++-----

Applied with Reviews and Acks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index d5c9bca..cbe89ff 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -268,8 +268,8 @@ 
 					reg = <3>;
 					regulator-compatible = "sm2";
 					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
 				};
 
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index e8e3a8a..0485d47 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -93,6 +93,8 @@  static const unsigned int tps6586x_ldo4_voltages[] = {
 	2300000, 2325000, 2350000, 2375000, 2400000, 2425000, 2450000, 2475000,
 };
 
+#define tps658623_sm2_voltages tps6586x_ldo4_voltages
+
 static const unsigned int tps6586x_ldo_voltages[] = {
 	1250000, 1500000, 1800000, 2500000, 2700000, 2850000, 3100000, 3300000,
 };
@@ -104,6 +106,13 @@  static const unsigned int tps6586x_sm2_voltages[] = {
 	4200000, 4250000, 4300000, 4350000, 4400000, 4450000, 4500000, 4550000,
 };
 
+static const unsigned int tps658643_sm2_voltages[] = {
+	1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000,
+	1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000,
+	1425000, 1450000, 1475000, 1500000, 1525000, 1550000, 1575000, 1600000,
+	1625000, 1650000, 1675000, 1700000, 1725000, 1750000, 1775000, 1800000,
+};
+
 static const unsigned int tps6586x_dvm_voltages[] = {
 	 725000,  750000,  775000,  800000,  825000,  850000,  875000,  900000,
 	 925000,  950000,  975000, 1000000, 1025000, 1050000, 1075000, 1100000,
@@ -119,8 +128,8 @@  static const unsigned int tps6586x_dvm_voltages[] = {
 		.ops	= &tps6586x_regulator_ops,			\
 		.type	= REGULATOR_VOLTAGE,				\
 		.id	= TPS6586X_ID_##_id,				\
-		.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages),	\
-		.volt_table = tps6586x_##vdata##_voltages,		\
+		.n_voltages = ARRAY_SIZE(vdata##_voltages),		\
+		.volt_table = vdata##_voltages,				\
 		.owner	= THIS_MODULE,					\
 		.enable_reg = TPS6586X_SUPPLY##ereg0,			\
 		.enable_mask = 1 << (ebit0),				\
@@ -162,27 +171,47 @@  static const unsigned int tps6586x_dvm_voltages[] = {
 
 static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_SYS_REGULATOR(),
-	TPS6586X_LDO(LDO_0, "vinldo01", ldo0, SUPPLYV1, 5, 3, ENC, 0, END, 0),
-	TPS6586X_LDO(LDO_3, "vinldo23", ldo, SUPPLYV4, 0, 3, ENC, 2, END, 2),
-	TPS6586X_LDO(LDO_5, "REG-SYS", ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
-	TPS6586X_LDO(LDO_6, "vinldo678", ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
-	TPS6586X_LDO(LDO_7, "vinldo678", ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
-	TPS6586X_LDO(LDO_8, "vinldo678", ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
-	TPS6586X_LDO(LDO_9, "vinldo9", ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
-	TPS6586X_LDO(LDO_RTC, "REG-SYS", ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
-	TPS6586X_LDO(LDO_1, "vinldo01", dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
-	TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
-
-	TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
+	TPS6586X_LDO(LDO_0, "vinldo01", tps6586x_ldo0, SUPPLYV1, 5, 3, ENC, 0,
+					END, 0),
+	TPS6586X_LDO(LDO_3, "vinldo23", tps6586x_ldo, SUPPLYV4, 0, 3, ENC, 2,
+					END, 2),
+	TPS6586X_LDO(LDO_5, "REG-SYS", tps6586x_ldo, SUPPLYV6, 0, 3, ENE, 6,
+					ENE, 6),
+	TPS6586X_LDO(LDO_6, "vinldo678", tps6586x_ldo, SUPPLYV3, 0, 3, ENC, 4,
+					END, 4),
+	TPS6586X_LDO(LDO_7, "vinldo678", tps6586x_ldo, SUPPLYV3, 3, 3, ENC, 5,
+					END, 5),
+	TPS6586X_LDO(LDO_8, "vinldo678", tps6586x_ldo, SUPPLYV2, 5, 3, ENC, 6,
+					END, 6),
+	TPS6586X_LDO(LDO_9, "vinldo9", tps6586x_ldo, SUPPLYV6, 3, 3, ENE, 7,
+					ENE, 7),
+	TPS6586X_LDO(LDO_RTC, "REG-SYS", tps6586x_ldo, SUPPLYV4, 3, 3, V4, 7,
+					V4, 7),
+	TPS6586X_LDO(LDO_1, "vinldo01", tps6586x_dvm, SUPPLYV1, 0, 5, ENC, 1,
+					END, 1),
+	TPS6586X_LDO(SM_2, "vin-sm2", tps6586x_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+
+	TPS6586X_DVM(LDO_2, "vinldo23", tps6586x_dvm, LDO2BV1, 0, 5, ENA, 3,
 					ENB, 3, TPS6586X_VCC2, BIT(6)),
-	TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
+	TPS6586X_DVM(LDO_4, "vinldo4", tps6586x_ldo4, LDO4V1, 0, 5, ENC, 3,
 					END, 3, TPS6586X_VCC1, BIT(6)),
-	TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
+	TPS6586X_DVM(SM_0, "vin-sm0", tps6586x_dvm, SM0V1, 0, 5, ENA, 1,
 					ENB, 1, TPS6586X_VCC1, BIT(2)),
-	TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
+	TPS6586X_DVM(SM_1, "vin-sm1", tps6586x_dvm, SM1V1, 0, 5, ENA, 0,
 					ENB, 0, TPS6586X_VCC1, BIT(0)),
 };
 
+static struct tps6586x_regulator tps658623_regulator[] = {
+	TPS6586X_LDO(SM_2, "vin-sm2", tps658623_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+};
+
+static struct tps6586x_regulator tps658643_regulator[] = {
+	TPS6586X_LDO(SM_2, "vin-sm2", tps658643_sm2, SUPPLYV2, 0, 5, ENC, 7,
+					END, 7),
+};
+
 /*
  * TPS6586X has 2 enable bits that are OR'ed to determine the actual
  * regulator state. Clearing one of this bits allows switching
@@ -254,11 +283,33 @@  static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev,
 			setting->slew_rate & TPS6586X_SLEW_RATE_MASK);
 }
 
-static inline struct tps6586x_regulator *find_regulator_info(int id)
+static struct tps6586x_regulator *find_regulator_info(int id, int version)
 {
 	struct tps6586x_regulator *ri;
+	struct tps6586x_regulator *table = NULL;
+	int num;
 	int i;
 
+	switch (version) {
+	case TPS658623:
+		table = tps658623_regulator;
+		num = ARRAY_SIZE(tps658623_regulator);
+		break;
+	case TPS658643:
+		table = tps658643_regulator;
+		num = ARRAY_SIZE(tps658643_regulator);
+		break;
+	}
+
+	/* Search version specific table first */
+	if (table) {
+		for (i = 0; i < num; i++) {
+			ri = &table[i];
+			if (ri->desc.id == id)
+				return ri;
+		}
+	}
+
 	for (i = 0; i < ARRAY_SIZE(tps6586x_regulator); i++) {
 		ri = &tps6586x_regulator[i];
 		if (ri->desc.id == id)
@@ -351,6 +402,7 @@  static int tps6586x_regulator_probe(struct platform_device *pdev)
 	struct regulator_init_data *reg_data;
 	struct tps6586x_platform_data *pdata;
 	struct of_regulator_match *tps6586x_reg_matches = NULL;
+	int version;
 	int id;
 	int err;
 
@@ -373,10 +425,13 @@  static int tps6586x_regulator_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	version = tps6586x_get_version(pdev->dev.parent);
+
 	for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) {
 		reg_data = pdata->reg_init_data[id];
 
-		ri = find_regulator_info(id);
+		ri = find_regulator_info(id, version);
+
 		if (!ri) {
 			dev_err(&pdev->dev, "invalid regulator ID specified\n");
 			return -EINVAL;