Message ID | 20250513-tx2nx-role-switch-v1-1-d92ea1870ea5@gmail.com |
---|---|
State | New |
Headers | show |
Series | arm64: tegra: Remove otg id gpio from Jetson TX2 NX | expand |
On Tue, May 13, 2025 at 4:10 PM Aaron Kling via B4 Relay <devnull+webgeek1234.gmail.com@kernel.org> wrote: > > From: Aaron Kling <webgeek1234@gmail.com> > > The p3509 carrier board does not connect the id gpio. Prior to this, the > gpio role switch driver could not detect the mode of the otg port. > > Signed-off-by: Aaron Kling <webgeek1234@gmail.com> > --- > arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts > index 26f71651933d1d8ef32bbd1645cac1820bd2e104..81f204e456409df355bbcb691ef99b0d0c9d504e 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts > +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts > @@ -669,7 +669,6 @@ connector { > vbus-gpios = <&gpio > TEGRA186_MAIN_GPIO(L, 4) > GPIO_ACTIVE_LOW>; > - id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; > }; > }; > > > --- > base-commit: 405e6c37c89ef0df2bfc7a988820a3df22dacb1b > change-id: 20250513-tx2nx-role-switch-37ec55d25189 > > Best regards, > -- > Aaron Kling <webgeek1234@gmail.com> > > Friendly reminder about this patch. Sincerely, Aaron
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 26f71651933d1d8ef32bbd1645cac1820bd2e104..81f204e456409df355bbcb691ef99b0d0c9d504e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -669,7 +669,6 @@ connector { vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_LOW>; - id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; };