diff mbox series

[v4,36/68] clk: tegra: periph: Add a determine_rate hook

Message ID 20221018-clk-range-checks-fixes-v4-36-971d5077e7d2@cerno.tech
State Handled Elsewhere
Headers show
Series clk: Make determine_rate mandatory for muxes | expand

Commit Message

Maxime Ripard May 5, 2023, 11:25 a.m. UTC 
The Tegra periph nodiv clock implements a mux with a set_parent hook, but
doesn't provide a determine_rate implementation.

This is a bit odd, since set_parent() is there to, as its name implies,
change the parent of a clock. However, the most likely candidates to
trigger that parent change are either the assigned-clock-parents device
tree property or a call to clk_set_rate(), with determine_rate()
figuring out which parent is the best suited for a given rate.

The other trigger would be a call to clk_set_parent(), but it's far less
used, and it doesn't look like there's any obvious user for that clock.

However, the upstream device trees seem to use assigned-clock-parents on
that clock to force the parent at boot time, so it's likely that the
author intent was to force the parent through the device tree and
prevent any reparenting but through an explicit call to
clk_set_parent().

This case would be equivalent to setting the determine_rate
implementation to clk_hw_determine_rate_no_reparent(). Indeed, if no
determine_rate implementation is provided, clk_round_rate() (through
clk_core_round_rate_nolock()) will call itself on the parent if
CLK_SET_RATE_PARENT is set, and will not change the clock rate
otherwise.

Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/tegra/clk-periph.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/clk/tegra/clk-periph.c b/drivers/clk/tegra/clk-periph.c
index 79ca3aa072b7..ea443366e972 100644
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
@@ -140,6 +140,7 @@  const struct clk_ops tegra_clk_periph_ops = {
 };
 
 static const struct clk_ops tegra_clk_periph_nodiv_ops = {
+	.determine_rate = clk_hw_determine_rate_no_reparent,
 	.get_parent = clk_periph_get_parent,
 	.set_parent = clk_periph_set_parent,
 	.is_enabled = clk_periph_is_enabled,