diff mbox series

[5/5] serial: tegra: Remove custom frame size calculation

Message ID 20220825085810.7290-6-ilpo.jarvinen@linux.intel.com
State Superseded
Headers show
Series None | expand

Commit Message

Ilpo Järvinen Aug. 25, 2022, 8:58 a.m. UTC 
The number of bits can be calculated using tty_get_frame_size(), no
need for the driver to do it on its own.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/serial-tegra.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index ad4f3567ff90..5a56bd20abcd 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1278,7 +1278,6 @@  static void tegra_uart_set_termios(struct uart_port *u,
 	unsigned long flags;
 	unsigned int lcr;
 	unsigned char char_bits;
-	int symb_bit = 1;
 	struct clk *parent_clk = clk_get_parent(tup->uart_clk);
 	unsigned long parent_clk_rate = clk_get_rate(parent_clk);
 	int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF;
@@ -1305,7 +1304,6 @@  static void tegra_uart_set_termios(struct uart_port *u,
 	termios->c_cflag &= ~CMSPAR;
 
 	if ((termios->c_cflag & PARENB) == PARENB) {
-		symb_bit++;
 		if (termios->c_cflag & PARODD) {
 			lcr |= UART_LCR_PARITY;
 			lcr &= ~UART_LCR_EPAR;
@@ -1318,22 +1316,18 @@  static void tegra_uart_set_termios(struct uart_port *u,
 	}
 
 	char_bits = tty_get_char_size(termios->c_cflag);
-	symb_bit += char_bits;
 	lcr &= ~UART_LCR_WLEN8;
 	lcr |= UART_LCR_WLEN(char_bits);
 
 	/* Stop bits */
-	if (termios->c_cflag & CSTOPB) {
+	if (termios->c_cflag & CSTOPB)
 		lcr |= UART_LCR_STOP;
-		symb_bit += 2;
-	} else {
+	else
 		lcr &= ~UART_LCR_STOP;
-		symb_bit++;
-	}
 
 	tegra_uart_write(tup, lcr, UART_LCR);
 	tup->lcr_shadow = lcr;
-	tup->symb_bit = symb_bit;
+	tup->symb_bit = tty_get_frame_size(termios->c_cflag);
 
 	/* Baud rate. */
 	baud = uart_get_baud_rate(u, termios, oldtermios,