| Message ID | 20210802211947.19715-8-digetx@gmail.com |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Tegra ARM32 device-tree improvements for 5.15 | expand |
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 1e30fa405fa0..cde9ae8fa04b 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1751,7 +1751,7 @@ temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>; #thermal-sensor-cells = <1>; vcc-supply = <®_module_3v3>; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 608896f8dd52..a46d9ba9bb7a 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1744,7 +1744,7 @@ temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_EDGE_FALLING>; #thermal-sensor-cells = <1>; vcc-supply = <®_module_3v3>; };
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +- arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)