| Message ID | 20210623042231.16008-3-digetx@gmail.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Support temperature trips by HWMON core and LM90 driver | expand |
On Wed, Jun 23, 2021 at 07:22:31AM +0300, Dmitry Osipenko wrote: > Support set_trips() callback of thermal device ops. This allows HWMON > device to operatively notify thermal core about temperature changes, which > is very handy to have in a case where HWMON sensor is used by CPU thermal > zone that performs passive cooling and emergency shutdown on overheat. > Thermal core will be able to react faster to temperature changes. > > The set_trips() callback is entirely optional. If HWMON sensor doesn't > support setting thermal trips, then the callback is a NO-OP. The dummy > callback has no effect on the thermal core. The temperature trips are > either complement the temperature polling mechanism of thermal core or > replace the polling if sensor can set the trips and polling is disabled > by a particular device in a device-tree. > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Applied. Thanks, Guenter > --- > drivers/hwmon/hwmon.c | 36 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > > diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c > index fd47ab4e6892..8d3b1dae31df 100644 > --- a/drivers/hwmon/hwmon.c > +++ b/drivers/hwmon/hwmon.c > @@ -153,8 +153,44 @@ static int hwmon_thermal_get_temp(void *data, int *temp) > return 0; > } > > +static int hwmon_thermal_set_trips(void *data, int low, int high) > +{ > + struct hwmon_thermal_data *tdata = data; > + struct hwmon_device *hwdev = to_hwmon_device(tdata->dev); > + const struct hwmon_chip_info *chip = hwdev->chip; > + const struct hwmon_channel_info **info = chip->info; > + unsigned int i; > + int err; > + > + if (!chip->ops->write) > + return 0; > + > + for (i = 0; info[i] && info[i]->type != hwmon_temp; i++) > + continue; > + > + if (!info[i]) > + return 0; > + > + if (info[i]->config[tdata->index] & HWMON_T_MIN) { > + err = chip->ops->write(tdata->dev, hwmon_temp, > + hwmon_temp_min, tdata->index, low); > + if (err && err != -EOPNOTSUPP) > + return err; > + } > + > + if (info[i]->config[tdata->index] & HWMON_T_MAX) { > + err = chip->ops->write(tdata->dev, hwmon_temp, > + hwmon_temp_max, tdata->index, high); > + if (err && err != -EOPNOTSUPP) > + return err; > + } > + > + return 0; > +} > + > static const struct thermal_zone_of_device_ops hwmon_thermal_ops = { > .get_temp = hwmon_thermal_get_temp, > + .set_trips = hwmon_thermal_set_trips, > }; > > static void hwmon_thermal_remove_sensor(void *data)
diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index fd47ab4e6892..8d3b1dae31df 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -153,8 +153,44 @@ static int hwmon_thermal_get_temp(void *data, int *temp) return 0; } +static int hwmon_thermal_set_trips(void *data, int low, int high) +{ + struct hwmon_thermal_data *tdata = data; + struct hwmon_device *hwdev = to_hwmon_device(tdata->dev); + const struct hwmon_chip_info *chip = hwdev->chip; + const struct hwmon_channel_info **info = chip->info; + unsigned int i; + int err; + + if (!chip->ops->write) + return 0; + + for (i = 0; info[i] && info[i]->type != hwmon_temp; i++) + continue; + + if (!info[i]) + return 0; + + if (info[i]->config[tdata->index] & HWMON_T_MIN) { + err = chip->ops->write(tdata->dev, hwmon_temp, + hwmon_temp_min, tdata->index, low); + if (err && err != -EOPNOTSUPP) + return err; + } + + if (info[i]->config[tdata->index] & HWMON_T_MAX) { + err = chip->ops->write(tdata->dev, hwmon_temp, + hwmon_temp_max, tdata->index, high); + if (err && err != -EOPNOTSUPP) + return err; + } + + return 0; +} + static const struct thermal_zone_of_device_ops hwmon_thermal_ops = { .get_temp = hwmon_thermal_get_temp, + .set_trips = hwmon_thermal_set_trips, }; static void hwmon_thermal_remove_sensor(void *data)
Support set_trips() callback of thermal device ops. This allows HWMON device to operatively notify thermal core about temperature changes, which is very handy to have in a case where HWMON sensor is used by CPU thermal zone that performs passive cooling and emergency shutdown on overheat. Thermal core will be able to react faster to temperature changes. The set_trips() callback is entirely optional. If HWMON sensor doesn't support setting thermal trips, then the callback is a NO-OP. The dummy callback has no effect on the thermal core. The temperature trips are either complement the temperature polling mechanism of thermal core or replace the polling if sensor can set the trips and polling is disabled by a particular device in a device-tree. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/hwmon/hwmon.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)