diff mbox series

[v2,08/13] ARM: tegra: acer-a500: Specify all CPU cores as cooling devices

Message ID 20210122202457.13326-9-digetx@gmail.com
State Rejected
Headers show
Series NVIDIA Tegra ARM32 device-tree improvements | expand

Commit Message

Dmitry Osipenko Jan. 22, 2021, 8:24 p.m. UTC 
If CPU0 is unplugged the cooling device can not rebind to CPU1. And if
CPU0 is plugged in again, the cooling device may fail to initialize.

If the CPUs are mapped with the physical CPU0 to Linux numbering
CPU1, the cooling device mapping will fail.

Hence specify all CPU cores as a cooling devices in the device-tree.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index 0d228e2dd158..4dcec18b677b 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -838,9 +838,10 @@  cpu0: cpu@0 {
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			cpu-supply = <&vdd_cpu>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -1070,7 +1071,8 @@  trip1: cpu-crit {
 			cooling-maps {
 				map0 {
 					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};