[v2,2/2] arm64: tegra: Set dma-ranges for memory subsystem

From: Thierry Reding <treding@nvidia.com>

On Tegra194, all clients of the memory subsystem can generally address
40 bits of system memory. However, bit 39 has special meaning and will
cause the memory controller to reorder sectors for block-linear buffer
formats. This is primarily useful for graphics-related devices.

Use of bit 39 must be controlled on a case-by-case basis. Buffers that
are used with bit 39 set by one device may be used with bit 39 cleared
by other devices.

Care must be taken to allocate buffers at addresses that do not require
bit 39 to be set. This is normally not an issue for system memory since
there are no Tegra-based systems with enough RAM to exhaust the 39-bit
physical address space. However, when a device is behind an IOMMU, such
as the ARM SMMU on Tegra194, the IOMMUs input address space can cause
IOVA allocations to happen in this region. This is for example the case
when an operating system implements a top-down allocation policy for IO
virtual addresses.

To account for this, describe the path that memory accesses take through
the system. Memory clients will send requests to the memory controller,
which forwards bits [38:0] of the address either to the external memory
controller or the SMMU, depending on the stream ID of the access. A good
way to describe this is using the interconnects bindings, see:

	Documentation/devicetree/bindings/interconnect/interconnect.txt

The standard "dma-mem" path is used to describe the path towards system
memory via the memory controller. A dma-ranges property in the memory
controller's device tree node limits the range of DMA addresses that the
memory clients can use to bits [38:0], ensuring that bit 39 is not used.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- use memory client IDs instead of stream IDs (Mikko Perttunen)

 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 55 +++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

On Sun, Nov 03, 2019 at 12:54:15PM +0100, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> On Tegra194, all clients of the memory subsystem can generally address
> 40 bits of system memory. However, bit 39 has special meaning and will
> cause the memory controller to reorder sectors for block-linear buffer
> formats. This is primarily useful for graphics-related devices.
> 
> Use of bit 39 must be controlled on a case-by-case basis. Buffers that
> are used with bit 39 set by one device may be used with bit 39 cleared
> by other devices.
> 
> Care must be taken to allocate buffers at addresses that do not require
> bit 39 to be set. This is normally not an issue for system memory since
> there are no Tegra-based systems with enough RAM to exhaust the 39-bit
> physical address space. However, when a device is behind an IOMMU, such
> as the ARM SMMU on Tegra194, the IOMMUs input address space can cause
> IOVA allocations to happen in this region. This is for example the case
> when an operating system implements a top-down allocation policy for IO
> virtual addresses.
> 
> To account for this, describe the path that memory accesses take through
> the system. Memory clients will send requests to the memory controller,
> which forwards bits [38:0] of the address either to the external memory
> controller or the SMMU, depending on the stream ID of the access. A good
> way to describe this is using the interconnects bindings, see:
> 
> 	Documentation/devicetree/bindings/interconnect/interconnect.txt
> 
> The standard "dma-mem" path is used to describe the path towards system
> memory via the memory controller. A dma-ranges property in the memory
> controller's device tree node limits the range of DMA addresses that the
> memory clients can use to bits [38:0], ensuring that bit 39 is not used.
> 
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Changes in v2:
> - use memory client IDs instead of stream IDs (Mikko Perttunen)
> 
>  arch/arm64/boot/dts/nvidia/tegra194.dtsi | 55 +++++++++++++++++++++++-
>  1 file changed, 54 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> index 084abe2e3267..64800ad52e19 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> @@ -53,6 +53,9 @@
>  			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
>  			resets = <&bpmp TEGRA194_RESET_EQOS>;
>  			reset-names = "eqos";
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR>,
> +					<&mc TEGRA194_MEMORY_CLIENT_EQOSW>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_EQOS>;
>  			status = "disabled";
>  
> @@ -166,10 +169,16 @@
>  			};
>  		};
>  
> -		memory-controller@2c00000 {
> +		mc: memory-controller@2c00000 {
>  			compatible = "nvidia,tegra194-mc";
>  			reg = <0x02c00000 0xb0000>;
> +			#interconnect-cells = <1>;

Needs to be documented?

>  			status = "disabled";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
>  		};
>  
>  		uarta: serial@3100000 {
> @@ -416,6 +425,9 @@
>  			clock-names = "sdhci";
>  			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA>,
> +					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA>;
> +			interconnect-names = "dma-mem";

And this?

>  			iommus = <&smmu TEGRA194_SID_SDMMC1>;
>  			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
>  									<0x07>;
> @@ -439,6 +451,9 @@
>  			clock-names = "sdhci";
>  			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR>,
> +					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW>;
> +			interconnect-names = "dma-mem";

And ...

>  			iommus = <&smmu TEGRA194_SID_SDMMC3>;
>  			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
>  			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
> @@ -467,6 +482,9 @@
>  					  <&bpmp TEGRA194_CLK_PLLC4>;
>  			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB>,
> +					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_SDMMC4>;
>  			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
>  			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
> @@ -496,6 +514,9 @@
>  				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
>  			reset-names = "hda", "hda2codec_2x", "hda2hdmi";
>  			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR>,
> +					<&mc TEGRA194_MEMORY_CLIENT_HDAW>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_HDA>;
>  			status = "disabled";
>  		};
> @@ -831,6 +852,8 @@
>  			#size-cells = <1>;
>  
>  			ranges = <0x15000000 0x15000000 0x01000000>;
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_HOST1X>;
>  
>  			display-hub@15200000 {
> @@ -867,6 +890,9 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
> +					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR>,
> +							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -883,6 +909,9 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
> +					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR>,
> +							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -899,6 +928,9 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
> +					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR>,
> +							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -915,6 +947,9 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
> +					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR>,
> +							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -1182,6 +1217,19 @@
>  			status = "disabled";
>  
>  			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
> +			interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL1RHP>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL1W>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL2R>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL2RHP>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL2W>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL3R>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL3RHP>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL3W>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL4R>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL4RHP>,
> +					<&mc TEGRA194_MEMORY_CLIENT_NVL4W>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_GPU>;
>  		};
>  	};
> @@ -1567,6 +1615,11 @@
>  		#clock-cells = <1>;
>  		#reset-cells = <1>;
>  		#power-domain-cells = <1>;
> +		interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR>,
> +				<&mc TEGRA194_MEMORY_CLIENT_BPMPW>,
> +				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR>,
> +				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW>;
> +		interconnect-names = "dma-mem";
>  		iommus = <&smmu TEGRA194_SID_BPMP>;
>  
>  		bpmp_i2c: i2c {
> -- 
> 2.23.0
>