@@ -1049,8 +1049,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA20_CLK_SBC3, TEGRA20_CLK_PLL_P, 100000000, 0 },
{ TEGRA20_CLK_SBC4, TEGRA20_CLK_PLL_P, 100000000, 0 },
{ TEGRA20_CLK_HOST1X, TEGRA20_CLK_PLL_C, 150000000, 0 },
- { TEGRA20_CLK_DISP1, TEGRA20_CLK_PLL_P, 600000000, 0 },
- { TEGRA20_CLK_DISP2, TEGRA20_CLK_PLL_P, 600000000, 0 },
{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
@@ -1253,8 +1253,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA30_CLK_SBC6, TEGRA30_CLK_PLL_P, 100000000, 0 },
{ TEGRA30_CLK_PLL_C, TEGRA30_CLK_CLK_MAX, 600000000, 0 },
{ TEGRA30_CLK_HOST1X, TEGRA30_CLK_PLL_C, 150000000, 0 },
- { TEGRA30_CLK_DISP1, TEGRA30_CLK_PLL_P, 600000000, 0 },
- { TEGRA30_CLK_DISP2, TEGRA30_CLK_PLL_P, 600000000, 0 },
{ TEGRA30_CLK_TWD, TEGRA30_CLK_CLK_MAX, 0, 1 },
{ TEGRA30_CLK_GR2D, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
Both Tegra20 and Tegra30 are initializing display's parent clock incorrectly because PLLP is running at 216/408MHz while display rate is set to 600MHz, but pre-setting the parent isn't needed at all because display driver selects proper parent anyways. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- Changelog: v2: I accidentally didn't include the second "VDE" patch into the patchset in v1. drivers/clk/tegra/clk-tegra20.c | 2 -- drivers/clk/tegra/clk-tegra30.c | 2 -- 2 files changed, 4 deletions(-)