| Message ID | 1546509899-5071-6-git-send-email-nkristam@nvidia.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Tegra XUSB gadget driver support | expand |
Hi Nagarjuna, avddio_usb-supply should be <&vdd_3v3_sys> . hvdd_usb-supply should be <&vdd__1v8> . Thanks, JC On 1/3/19 6:04 PM, Nagarjuna Kristam wrote: > Enable XUSB device mode driver for USB0 slot on Jetson TX1. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > index 985777c..293b95f 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > @@ -1325,6 +1325,21 @@ > status = "okay"; > }; > > + extcon_usb: extcon_vbus { > + compatible = "linux,extcon-usb-gpio"; > + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) 1>; > + }; > + > + xudc@700d0000 { > + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>; > + phy-names = "usb2"; > + avddio_usb-supply = <&vdd_pex_1v05>; > + hvdd_usb-supply = <&vdd_3v3_sys>; > + avdd_pll_utmip-supply = <&vdd_1v8>; > + extcon = <&extcon_usb>; > + status = "okay"; > + }; > + > sata@70020000 { > status = "okay"; > phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
On Thu, Jan 03, 2019 at 03:34:56PM +0530, Nagarjuna Kristam wrote: > Enable XUSB device mode driver for USB0 slot on Jetson TX1. > > Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> > --- > arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > index 985777c..293b95f 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi > @@ -1325,6 +1325,21 @@ > status = "okay"; > }; > > + extcon_usb: extcon_vbus { > + compatible = "linux,extcon-usb-gpio"; > + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) 1>; > + }; This needs to go to the end of the file. The ordering should be: * all nodes with unit-address, sorted by unit-address * all nodes without unit-address, sorted alphabetically Thierry
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 985777c..293b95f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1325,6 +1325,21 @@ status = "okay"; }; + extcon_usb: extcon_vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) 1>; + }; + + xudc@700d0000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>; + phy-names = "usb2"; + avddio_usb-supply = <&vdd_pex_1v05>; + hvdd_usb-supply = <&vdd_3v3_sys>; + avdd_pll_utmip-supply = <&vdd_1v8>; + extcon = <&extcon_usb>; + status = "okay"; + }; + sata@70020000 { status = "okay"; phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
Enable XUSB device mode driver for USB0 slot on Jetson TX1. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)