| Message ID | 1391817298-10600-1-git-send-email-pengw@nvidia.com |
|---|---|
| State | Accepted, archived |
| Headers | show |
On 02/07/2014 04:54 PM, Bryan Wu wrote: > PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. > Enabling this driver for Tegra V4L2 soc camera driver and camera > sensor drivers. I've squashed patch 1/2 into Tegra's for-3.15/defconfig branch, and applied patch 2/2 to Tegra's for-3.15/dt branch. Note that your patches were sent with an email "From" address that didn't match your signed-off-by tag, yet "git send-email" didn't insert a "From" header in the email body. Can you please check your git user ID and/or email settings. Consequently, I had to adjust the git author field in git to match your s-o-b line. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 12, 2014 at 11:08 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 02/07/2014 04:54 PM, Bryan Wu wrote: >> PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. >> Enabling this driver for Tegra V4L2 soc camera driver and camera >> sensor drivers. > > I've squashed patch 1/2 into Tegra's for-3.15/defconfig branch, and > applied patch 2/2 to Tegra's for-3.15/dt branch. > > Note that your patches were sent with an email "From" address that > didn't match your signed-off-by tag, yet "git send-email" didn't insert > a "From" header in the email body. Can you please check your git user ID > and/or email settings. Consequently, I had to adjust the git author > field in git to match your s-o-b line. My bad. I need to update my git send-email script to use --from "Bryan Wu <pengw@nvidia.com>" instead of --from "Bryan Wu <cooloney@gmail.com>" Need I resubmit this patchset? Thanks, -Bryan -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/12/2014 01:09 PM, Bryan Wu wrote: > On Wed, Feb 12, 2014 at 11:08 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: >> On 02/07/2014 04:54 PM, Bryan Wu wrote: >>> PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. >>> Enabling this driver for Tegra V4L2 soc camera driver and camera >>> sensor drivers. >> >> I've squashed patch 1/2 into Tegra's for-3.15/defconfig branch, and >> applied patch 2/2 to Tegra's for-3.15/dt branch. >> >> Note that your patches were sent with an email "From" address that >> didn't match your signed-off-by tag, yet "git send-email" didn't insert >> a "From" header in the email body. Can you please check your git user ID >> and/or email settings. Consequently, I had to adjust the git author >> field in git to match your s-o-b line. > > My bad. I need to update my git send-email script to use --from "Bryan > Wu <pengw@nvidia.com>" instead of --from "Bryan Wu > <cooloney@gmail.com>" > > Need I resubmit this patchset? No need to resent; I fixed them up. Why not just put the correct values in ~/.gitconfig? Perhaps this is because you switch between NVIDIA and non-NVIDIA email addresses and/or mail servers, so you can't make ~/.gitconfig static and universally correct? If you have a recent enough git, what I do is: $ cat ~/.gitconfig [include] path = .gitconfig-user path = .gitconfig-email-server ... $ cat ~/.gitconfig-user-nvidia [user] name = Stephen Warren email = swarren@nvidia.com $ cat ~/.gitconfig-user-wwwdotorg [user] name = Stephen Warren email = swarren@wwwdotorg.org ~/.gitconfig-user is a symlink to one of ~/.gitconfig-user-*, and I have a script that deletes the link and points it at a new location: $ cat `which git-switch-user` #!/bin/bash cd $HOME mainfile=.gitconfig-user newlink=${mainfile}-$1 if [ ! -f ${newlink} ]; then echo ERROR: ${newlink} not found exit 1 fi rm -f ${mainfile} ln -s ${newlink} ${mainfile} ... and the same thing for email servers. Then, I can run e.g.: git-switch-email-server nvidia; \ git send-email --to internal@nvidia.com *.patch; \ git-switch-email-server severn-port-forwarded -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 12, 2014 at 12:17 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 02/12/2014 01:09 PM, Bryan Wu wrote: >> On Wed, Feb 12, 2014 at 11:08 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: >>> On 02/07/2014 04:54 PM, Bryan Wu wrote: >>>> PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. >>>> Enabling this driver for Tegra V4L2 soc camera driver and camera >>>> sensor drivers. >>> >>> I've squashed patch 1/2 into Tegra's for-3.15/defconfig branch, and >>> applied patch 2/2 to Tegra's for-3.15/dt branch. >>> >>> Note that your patches were sent with an email "From" address that >>> didn't match your signed-off-by tag, yet "git send-email" didn't insert >>> a "From" header in the email body. Can you please check your git user ID >>> and/or email settings. Consequently, I had to adjust the git author >>> field in git to match your s-o-b line. >> >> My bad. I need to update my git send-email script to use --from "Bryan >> Wu <pengw@nvidia.com>" instead of --from "Bryan Wu >> <cooloney@gmail.com>" >> >> Need I resubmit this patchset? > > No need to resent; I fixed them up. > > Why not just put the correct values in ~/.gitconfig? > > Perhaps this is because you switch between NVIDIA and non-NVIDIA email > addresses and/or mail servers, so you can't make ~/.gitconfig static and > universally correct? If you have a recent enough git, what I do is: > > $ cat ~/.gitconfig > [include] > path = .gitconfig-user > path = .gitconfig-email-server > ... > > $ cat ~/.gitconfig-user-nvidia > [user] > name = Stephen Warren > email = swarren@nvidia.com > > $ cat ~/.gitconfig-user-wwwdotorg > [user] > name = Stephen Warren > email = swarren@wwwdotorg.org > > ~/.gitconfig-user is a symlink to one of ~/.gitconfig-user-*, and I have > a script that deletes the link and points it at a new location: > > $ cat `which git-switch-user` > #!/bin/bash > > cd $HOME > mainfile=.gitconfig-user > newlink=${mainfile}-$1 > if [ ! -f ${newlink} ]; then > echo ERROR: ${newlink} not found > exit 1 > fi > > rm -f ${mainfile} > ln -s ${newlink} ${mainfile} > > ... and the same thing for email servers. > > Then, I can run e.g.: > > git-switch-email-server nvidia; \ > git send-email --to internal@nvidia.com *.patch; \ > git-switch-email-server severn-port-forwarded Awesome, I will firstly update my .gitconfig. Actually I basically just have one outbound server which is gmail server. Although I put From: @nvidia.com, I still use gmail server to send out patch emails. Still don't wanna touch our internal email server. Thanks a lot and it's really helpful. -Bryan -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/12/2014 02:55 PM, Bryan Wu wrote: > On Wed, Feb 12, 2014 at 12:17 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: >> On 02/12/2014 01:09 PM, Bryan Wu wrote: >>> On Wed, Feb 12, 2014 at 11:08 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: >>>> On 02/07/2014 04:54 PM, Bryan Wu wrote: >>>>> PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. >>>>> Enabling this driver for Tegra V4L2 soc camera driver and camera >>>>> sensor drivers. ... >>>> Note that your patches were sent with an email "From" address that >>>> didn't match your signed-off-by tag, yet "git send-email" didn't insert >>>> a "From" header in the email body. Can you please check your git user ID >>>> and/or email settings. Consequently, I had to adjust the git author >>>> field in git to match your s-o-b line. ... >> Why not just put the correct values in ~/.gitconfig? >> >> Perhaps this is because you switch between NVIDIA and non-NVIDIA email >> addresses and/or mail servers, so you can't make ~/.gitconfig static and >> universally correct? If you have a recent enough git, what I do is: ... > Awesome, I will firstly update my .gitconfig. Actually I basically > just have one outbound server which is gmail server. Although I put > From: @nvidia.com, I still use gmail server to send out patch emails. > Still don't wanna touch our internal email server. You shouldn't send email with a from address @nvidia.com from a server other than NVIDIA's servers. If you do, plenty of people will drop the email as SPAM, since NVIDIA publishes SPF[1] records (and perhaps other email configuration) for nvidia.com. Since there are good reasons not to use NVIDIA's email servers, that means: tell git the actual email address you're sending from (for the email settings; you should set the author/commit ID to your @nvidia.com address still). [1] http://www.openspf.org/ $ dig -t spf nvidia.com ... nvidia.com. 180 IN SPF \ "v=spf1 mx/24 mx:nvidia.com/24 -all" -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 12, 2014 at 2:35 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 02/12/2014 02:55 PM, Bryan Wu wrote: >> On Wed, Feb 12, 2014 at 12:17 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: >>> On 02/12/2014 01:09 PM, Bryan Wu wrote: >>>> On Wed, Feb 12, 2014 at 11:08 AM, Stephen Warren <swarren@wwwdotorg.org> wrote: >>>>> On 02/07/2014 04:54 PM, Bryan Wu wrote: >>>>>> PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. >>>>>> Enabling this driver for Tegra V4L2 soc camera driver and camera >>>>>> sensor drivers. > ... >>>>> Note that your patches were sent with an email "From" address that >>>>> didn't match your signed-off-by tag, yet "git send-email" didn't insert >>>>> a "From" header in the email body. Can you please check your git user ID >>>>> and/or email settings. Consequently, I had to adjust the git author >>>>> field in git to match your s-o-b line. > ... >>> Why not just put the correct values in ~/.gitconfig? >>> >>> Perhaps this is because you switch between NVIDIA and non-NVIDIA email >>> addresses and/or mail servers, so you can't make ~/.gitconfig static and >>> universally correct? If you have a recent enough git, what I do is: > ... >> Awesome, I will firstly update my .gitconfig. Actually I basically >> just have one outbound server which is gmail server. Although I put >> From: @nvidia.com, I still use gmail server to send out patch emails. >> Still don't wanna touch our internal email server. > > You shouldn't send email with a from address @nvidia.com from a server > other than NVIDIA's servers. If you do, plenty of people will drop the > email as SPAM, since NVIDIA publishes SPF[1] records (and perhaps other > email configuration) for nvidia.com. Since there are good reasons not to > use NVIDIA's email servers, that means: tell git the actual email > address you're sending from (for the email settings; you should set the > author/commit ID to your @nvidia.com address still). > > [1] http://www.openspf.org/ > > $ dig -t spf nvidia.com > ... > nvidia.com. 180 IN SPF \ > "v=spf1 mx/24 mx:nvidia.com/24 -all" > Sure, I think I just missed to set the author as @nvidia.com but SOB is @nvidia.com in this patchset. And I still should use --from "Bryan Wu <cooloney@gmail.com>" for sending out email from gmail server. Right? Thanks, -Bryan -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 02/12/2014 04:23 PM, Bryan Wu wrote: ... > Sure, I think I just missed to set the author as @nvidia.com but SOB > is @nvidia.com in this patchset. And I still should use --from "Bryan > Wu <cooloney@gmail.com>" for sending out email from gmail server. > Right? I think you want the following in ~/.gitconfig: [user] name = Bryan Wu email = pengw@nvidia.com [sendemail] from = Bryan Wu <cooloney@gmail.com> I assume "--from xxx" is the same as setting the last variable I listed above. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Feb 12, 2014 at 6:12 PM, Stephen Warren <swarren@wwwdotorg.org> wrote: > On 02/12/2014 04:23 PM, Bryan Wu wrote: > ... >> Sure, I think I just missed to set the author as @nvidia.com but SOB >> is @nvidia.com in this patchset. And I still should use --from "Bryan >> Wu <cooloney@gmail.com>" for sending out email from gmail server. >> Right? > > I think you want the following in ~/.gitconfig: > > [user] > name = Bryan Wu > email = pengw@nvidia.com I have these settings in my company machine. > [sendemail] > from = Bryan Wu <cooloney@gmail.com> > > I assume "--from xxx" is the same as setting the last variable I listed > above. Yeah, I didn't put this in my .gitconfig but put them in my script with "git send-mail". Thanks, -Bryan -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 995d434..efcf15f 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -125,6 +125,7 @@ CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_I2C_COMPAT is not set +CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y
PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras. Enabling this driver for Tegra V4L2 soc camera driver and camera sensor drivers. Signed-off-by: Bryan Wu <pengw@nvidia.com> --- arch/arm/configs/tegra_defconfig | 1 + 1 file changed, 1 insertion(+)