mbox series

[v2,0/4] Add JDI LPM102A188A display panel support

Message ID 20221025153746.101278-1-diogo.ivo@tecnico.ulisboa.pt
Headers show
Series Add JDI LPM102A188A display panel support | expand

Message

Diogo Ivo Oct. 25, 2022, 3:37 p.m. UTC 
Hello,

These patches add support for the JDI LPM102A188A display panel,
found in the Google Pixel C.

Patch 1 adds the DT bindings for the panel.

Patch 2 adds a register clear to the Tegra DSI driver, needed for the
panel initialization commands to be properly sent.

Patch 3 adds the panel driver, which is based on the downstream
kernel driver published by Google and developed by Sean Paul.

Patch 4 adds the DT node for the Google Pixel C. 

The first version of this patch series can be found at:
https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@tecnico.ulisboa.pt/

Changes in v2:
 - Patch 1: remove touchscreen reset gpio property
 - Patch 2: clear register based on its value rather than a DT property
 - Patch 3: tune backlight delay values
 - Patch 4: add generic node names, remove underscores 

Thank you.

Diogo Ivo (4):

  dt-bindings: display: Add bindings for JDI LPM102A188A
  drm/tegra: dsi: Clear enable register if powered by bootloader
  drm/panel: Add driver for JDI LPM102A188A
  arm64: dts: smaug: Add display panel node

 .../display/panel/jdi,lpm102a188a.yaml        |  94 ++++
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts |  70 +++
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c | 509 ++++++++++++++++++
 drivers/gpu/drm/tegra/dsi.c                   |   9 +
 6 files changed, 694 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-jdi-lpm102a188a.c

Comments

Diogo Ivo Jan. 9, 2023, 3:09 p.m. UTC | #1 
On Tue, Oct 25, 2022 at 04:37:43PM +0100, Diogo Ivo wrote:
> Hello,
> 
> These patches add support for the JDI LPM102A188A display panel,
> found in the Google Pixel C.
> 
> Patch 1 adds the DT bindings for the panel.
> 
> Patch 2 adds a register clear to the Tegra DSI driver, needed for the
> panel initialization commands to be properly sent.
> 
> Patch 3 adds the panel driver, which is based on the downstream
> kernel driver published by Google and developed by Sean Paul.
> 
> Patch 4 adds the DT node for the Google Pixel C. 
> 
> The first version of this patch series can be found at:
> https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@tecnico.ulisboa.pt/
> 
> Changes in v2:
>  - Patch 1: remove touchscreen reset gpio property
>  - Patch 2: clear register based on its value rather than a DT property
>  - Patch 3: tune backlight delay values
>  - Patch 4: add generic node names, remove underscores 
> 
Hello,

Gentle ping on this series.

Thank you,

Diogo