| Message ID | 20180901081248.22639-1-marcel@ziswiler.com |
|---|---|
| Headers | show |
| Series | ARM: dts: tegra: colibri_t30: major revamp | expand |
On Sat, Sep 01, 2018 at 10:12:14AM +0200, Marcel Ziswiler wrote: > This series is a major overhaul for the Toradex Colibri T30 system on > module. > > Changes in v2: > - Also move serial UART "nvidia,tegra30-hsuart" compatible to module > level device trees. > - Also replace underscores in node names with dashes. > - Also replace underscores in UART annotations with dashes. > - When running some more tests I realized that the reg-addr should > really be 0x3f. Fix this. > - Get rid of fake clocks simple bus as suggested by Rob. > - Drop "[PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on > emmc" which should already be handled by the broken-hpi quirk as > pointed out by Dmitry. If I would find more eMMC parts which exhibit > the issue I will add them to the quirk as a separate patch. > - New patch as suggested by Rob. > - New patch. > > Marcel Ziswiler (34): > ARM: tegra: colibri_t30: add local-mac-address property > ARM: tegra: colibri_t30: reorder host1x/hdmi properties > ARM: tegra: colibri_t30: regulator clean-up > ARM: tegra: colibri_t30: add missing regulators > ARM: tegra: colibri_t30: annotate uarts and move compatible to board > ARM: tegra: colibri_t30: white-space clean-up > ARM: tegra: colibri_t30: move dr_mode property from phy to controller > ARM: tegra: colibri_t30: reorder backlight properties > ARM: tegra: colibri_t30: drop pwmleds > ARM: tegra: colibri_t30: pinmux clean-up > ARM: tegra: colibri_t30: add missing pinmux > ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811 > ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation > ARM: tegra: colibri_t30: add i2c-thermtrip > ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies > ARM: tegra: colibri_t30: enable emmc ddr52 mode > ARM: tegra: colibri_t30: get rid of fake clocks simple bus > ARM: tegra: colibri_t30: line break long compatible property line > ARM: tegra: colibri_t30: move input include to carrier board > ARM: tegra: colibri_t30: remove unused nvidia,is-wired property > ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip > ARM: tegra: colibri_t30: enable hda over hdmi > ARM: tegra: colibri_t30: annotate sd card detect > ARM: tegra: colibri_t30: annotate ehci instance 1 > ARM: tegra: colibri_t30: update compatibility comment > ARM: tegra: colibri_t30: drop module level model and compatible > ARM: tegra: colibri_t30: drop obsolete spidev node > ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc > ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and > tps62362@60 > ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity > ARM: tegra: colibri_t30: remove unused mcp2515 can0 label > ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies > ARM: tegra: colibri_t30: annotate unused i2c busses > ARM: tegra: colibri_t30: annotate power I2C being on-module > > arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130 ++--- > arch/arm/boot/dts/tegra30-colibri.dtsi | 780 +++++++++++++++++++++----- > 2 files changed, 706 insertions(+), 204 deletions(-) Applied, thanks. Thierry
This series is a major overhaul for the Toradex Colibri T30 system on module. Changes in v2: - Also move serial UART "nvidia,tegra30-hsuart" compatible to module level device trees. - Also replace underscores in node names with dashes. - Also replace underscores in UART annotations with dashes. - When running some more tests I realized that the reg-addr should really be 0x3f. Fix this. - Get rid of fake clocks simple bus as suggested by Rob. - Drop "[PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on emmc" which should already be handled by the broken-hpi quirk as pointed out by Dmitry. If I would find more eMMC parts which exhibit the issue I will add them to the quirk as a separate patch. - New patch as suggested by Rob. - New patch. Marcel Ziswiler (34): ARM: tegra: colibri_t30: add local-mac-address property ARM: tegra: colibri_t30: reorder host1x/hdmi properties ARM: tegra: colibri_t30: regulator clean-up ARM: tegra: colibri_t30: add missing regulators ARM: tegra: colibri_t30: annotate uarts and move compatible to board ARM: tegra: colibri_t30: white-space clean-up ARM: tegra: colibri_t30: move dr_mode property from phy to controller ARM: tegra: colibri_t30: reorder backlight properties ARM: tegra: colibri_t30: drop pwmleds ARM: tegra: colibri_t30: pinmux clean-up ARM: tegra: colibri_t30: add missing pinmux ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811 ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation ARM: tegra: colibri_t30: add i2c-thermtrip ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies ARM: tegra: colibri_t30: enable emmc ddr52 mode ARM: tegra: colibri_t30: get rid of fake clocks simple bus ARM: tegra: colibri_t30: line break long compatible property line ARM: tegra: colibri_t30: move input include to carrier board ARM: tegra: colibri_t30: remove unused nvidia,is-wired property ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip ARM: tegra: colibri_t30: enable hda over hdmi ARM: tegra: colibri_t30: annotate sd card detect ARM: tegra: colibri_t30: annotate ehci instance 1 ARM: tegra: colibri_t30: update compatibility comment ARM: tegra: colibri_t30: drop module level model and compatible ARM: tegra: colibri_t30: drop obsolete spidev node ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and tps62362@60 ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity ARM: tegra: colibri_t30: remove unused mcp2515 can0 label ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies ARM: tegra: colibri_t30: annotate unused i2c busses ARM: tegra: colibri_t30: annotate power I2C being on-module arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130 ++--- arch/arm/boot/dts/tegra30-colibri.dtsi | 780 +++++++++++++++++++++----- 2 files changed, 706 insertions(+), 204 deletions(-)