diff mbox series

[1/2] dt-bindings: pwm: brcm,bcm7038: Document the 'open-drain' property

Message ID 20241012025603.1644451-2-florian.fainelli@broadcom.com
State Changes Requested
Headers show
Series pwm: brcmstb: Support configurable open-drain mode | expand

Commit Message

Florian Fainelli Oct. 12, 2024, 2:56 a.m. UTC
Document the 'open-drain' property that allows configuring the PWM
controller outputs in open drain versus totem pole.

Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Rob Herring (Arm) Oct. 15, 2024, 4:32 p.m. UTC | #1
On Fri, Oct 11, 2024 at 07:56:02PM -0700, Florian Fainelli wrote:
> Document the 'open-drain' property that allows configuring the PWM
> controller outputs in open drain versus totem pole.
> 
> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
> ---
>  Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
> index 119de3d7f9dd..12851c43a612 100644
> --- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
> +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
> @@ -25,6 +25,12 @@ properties:
>    clocks:
>      maxItems: 1
>  
> +  open-drain:
> +    type: boolean
> +    description:
> +      Configure the outputs with open-drain structure, if omitted totem pole
> +      structure is used.
> +

There's one other PWM with 'open-drain' so move the definition to 
pwm.yaml.

Alternatively, 'drive-open-drain' is a much more commonly used 
variation.

Another thing to consider is for any PWM controller with more than 
1 output, you might want this to be per output and therefore should be 
a flag in the cells.

Rob
Florian Fainelli Oct. 15, 2024, 5:07 p.m. UTC | #2
On 10/15/24 09:32, Rob Herring wrote:
> On Fri, Oct 11, 2024 at 07:56:02PM -0700, Florian Fainelli wrote:
>> Document the 'open-drain' property that allows configuring the PWM
>> controller outputs in open drain versus totem pole.
>>
>> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
>> ---
>>   Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
>> index 119de3d7f9dd..12851c43a612 100644
>> --- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
>> +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
>> @@ -25,6 +25,12 @@ properties:
>>     clocks:
>>       maxItems: 1
>>   
>> +  open-drain:
>> +    type: boolean
>> +    description:
>> +      Configure the outputs with open-drain structure, if omitted totem pole
>> +      structure is used.
>> +
> 
> There's one other PWM with 'open-drain' so move the definition to
> pwm.yaml.

Ah indeed, there is one now, great.

> 
> Alternatively, 'drive-open-drain' is a much more commonly used
> variation.

That name works just as well.

> 
> Another thing to consider is for any PWM controller with more than
> 1 output, you might want this to be per output and therefore should be
> a flag in the cells.

Yes, that is a good point, this controller has two channels, so it seems 
like increasing the #pwm-cells might be the way to go.

Thanks!
Uwe Kleine-König Oct. 29, 2024, 10:44 a.m. UTC | #3
Hello,

On Tue, Oct 15, 2024 at 10:07:10AM -0700, Florian Fainelli wrote:
> On 10/15/24 09:32, Rob Herring wrote:
> > Another thing to consider is for any PWM controller with more than
> > 1 output, you might want this to be per output and therefore should be
> > a flag in the cells.
> 
> Yes, that is a good point, this controller has two channels, so it seems
> like increasing the #pwm-cells might be the way to go.

So the idea is something like:

diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
index ab9a077e3c7d..d18b006a7399 100644
--- a/include/dt-bindings/pwm/pwm.h
+++ b/include/dt-bindings/pwm/pwm.h
@@ -11,5 +11,6 @@
 #define _DT_BINDINGS_PWM_PWM_H
 
 #define PWM_POLARITY_INVERTED			(1 << 0)
+#define PWM_OUTPUT_OPEN_DRAIN			(1 << 1)
 
 #endif

and then add support for that to the core and drivers? There is some
intersection with pinctrl (depending on hardware). I wonder if
abstracting this somehow using the typical pinctrl properties would be a
saner option??

Best regards
Uwe
Florian Fainelli Oct. 29, 2024, 4:03 p.m. UTC | #4
On 10/29/24 03:44, Uwe Kleine-König wrote:
> Hello,
> 
> On Tue, Oct 15, 2024 at 10:07:10AM -0700, Florian Fainelli wrote:
>> On 10/15/24 09:32, Rob Herring wrote:
>>> Another thing to consider is for any PWM controller with more than
>>> 1 output, you might want this to be per output and therefore should be
>>> a flag in the cells.
>>
>> Yes, that is a good point, this controller has two channels, so it seems
>> like increasing the #pwm-cells might be the way to go.
> 
> So the idea is something like:
> 
> diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
> index ab9a077e3c7d..d18b006a7399 100644
> --- a/include/dt-bindings/pwm/pwm.h
> +++ b/include/dt-bindings/pwm/pwm.h
> @@ -11,5 +11,6 @@
>   #define _DT_BINDINGS_PWM_PWM_H
>   
>   #define PWM_POLARITY_INVERTED			(1 << 0)
> +#define PWM_OUTPUT_OPEN_DRAIN			(1 << 1)
>   
>   #endif
> 
> and then add support for that to the core and drivers? There is some
> intersection with pinctrl (depending on hardware). I wonder if
> abstracting this somehow using the typical pinctrl properties would be a
> saner option??

But what if the pin is not managed by a pinctrl provider? I have started 
going the route of implementing the PWM_OUTPUT_OPEN_DRAIN bit as an 
additional specifier in the #pwm-cells, but I am not sure to what extent 
this should be allowed to be changed at runtime.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
index 119de3d7f9dd..12851c43a612 100644
--- a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml
@@ -25,6 +25,12 @@  properties:
   clocks:
     maxItems: 1
 
+  open-drain:
+    type: boolean
+    description:
+      Configure the outputs with open-drain structure, if omitted totem pole
+      structure is used.
+
 required:
   - compatible
   - reg