Message ID | 20240113224628.377993-2-martin.blumenstingl@googlemail.com |
---|---|
State | Handled Elsewhere |
Headers | show |
Series | regulator: pwm-regulator: Fixes for disabled PWMs at boot | expand |
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 698c420e0869..226ca4c62673 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev) pwm_get_state(drvdata->pwm, &pstate); voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit); + if (voltage < min(max_uV_duty, min_uV_duty) || + voltage > max(max_uV_duty, min_uV_duty)) + return -ENOTRECOVERABLE; /* * The dutycycle for min_uV might be greater than the one for max_uV.
Continuous regulators can be configured to operate only in a certain duty cycle range (for example from 0..91%). Add a check to error out if the duty cycle translates to an unsupported (or out of range) voltage. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- Changes from v1 -> v2: - this patch is new, using suggestions from Uwe drivers/regulator/pwm-regulator.c | 3 +++ 1 file changed, 3 insertions(+)