diff mbox series

dt-bindings: pwm: brcm,kona-pwm: convert to YAML

Message ID 20230508085727.GA7252@standask-GA-A55M-S2HP
State Changes Requested
Headers show
Series dt-bindings: pwm: brcm,kona-pwm: convert to YAML | expand

Commit Message

Stanislav Jakubek May 8, 2023, 8:57 a.m. UTC 
Convert Broadcom Kona family PWM controller bindings to DT schema.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
 .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
 2 files changed, 51 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml

Comments

Krzysztof Kozlowski May 8, 2023, 9:16 a.m. UTC | #1 
On 08/05/2023 10:57, Stanislav Jakubek wrote:
> Convert Broadcom Kona family PWM controller bindings to DT schema.

Please mention in the commit log changes to original binding. You added
new compatible.

> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
>  .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 21 deletions(-)


Best regards,
Krzysztof
Rob Herring May 8, 2023, 9:27 a.m. UTC | #2 
On Mon, 08 May 2023 10:57:27 +0200, Stanislav Jakubek wrote:
> Convert Broadcom Kona family PWM controller bindings to DT schema.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
>  .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 21 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
>  create mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230508085727.GA7252@standask-GA-A55M-S2HP

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
deleted file mode 100644
index c42eecfc81ed..000000000000
--- a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
+++ /dev/null
@@ -1,21 +0,0 @@ 
-Broadcom Kona PWM controller device tree bindings
-
-This controller has 6 channels.
-
-Required Properties :
-- compatible: should contain "brcm,kona-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: phandle + clock specifier pair for the external clock
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a
-  description of the cells format.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-pwm: pwm@3e01a000 {
-	compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-	reg = <0x3e01a000 0xc4>;
-	clocks = <&pwm_clk>;
-	#pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
new file mode 100644
index 000000000000..d1a58d130708
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,kona-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family PWM controller
+
+description:
+  This controller has 6 channels.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-pwm
+      - const: brcm,kona-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/bcm281xx.h"
+
+    pwm@3e01a000 {
+       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+       reg = <0x3e01a000 0xcc>;
+       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+       #pwm-cells = <3>;
+    };
+...