From patchwork Thu Jul 22 14:46:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Daniel Thompson X-Patchwork-Id: 1508751 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-pwm-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=sh8hlv9d; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4GVwJg2slKz9sRR for ; Fri, 23 Jul 2021 00:46:59 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232431AbhGVOGX (ORCPT ); Thu, 22 Jul 2021 10:06:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50014 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232375AbhGVOGX (ORCPT ); Thu, 22 Jul 2021 10:06:23 -0400 Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 00CEDC0613C1 for ; Thu, 22 Jul 2021 07:46:58 -0700 (PDT) Received: by mail-wm1-x32b.google.com with SMTP id x14-20020a7bc20e0000b0290249f2904453so2651494wmi.1 for ; Thu, 22 Jul 2021 07:46:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=DnmHNNXEi+D67CdXt2sdtRiYmXnF0UzDAK5d1qxhJYo=; b=sh8hlv9dg7eFqGZTlCBS2fKOrpDKfSZK3zJeZAxqFqqhfvCmEK+p2ojCMdRWL4QTY1 qHojFkfGdIg6xnOeJsgldaeFwrZXI+0iVQAYPS3CL4l1xCGYemJTMcW38fTnJoXCdl/x t/bhlRsTtobXIZx9KJPjblZFuuHKoNbtUftrzqGxFV6GnOBEyLkgCOHKzm89LzDkfnpy bo1lPduqlKiYJzUzLcbCGTFOQ5vPoPyPxk+9Bdj6CZ1itgw5tz7j/fFh6Fu4QFmrkKG+ 8qS9w+idYQf/1f/QWfl6Bc6iw2Hp3K25vaDVrlWaCKyoCu2YX52X2iXDrh+XKwdT25hL SBbA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=DnmHNNXEi+D67CdXt2sdtRiYmXnF0UzDAK5d1qxhJYo=; b=Ggnq5maymjj+emxkH0HW8uBW/cNm9tjPT8Y+QBcyefRfNzGTjr8g3NSYEnBbBuMRxH s/5CM3VT/nax0jzM/PNXoKGXF7QhI1yiG0smR1aNORdqk7vl4aC5jfM1tBGtHJ4ao8Kh HIWwLpEfkjtzeY+7ayliDFsxy7A5Wlu66EPgX4zwb9n73TpqnNbUvhyvFXLgWVJgR6L5 K8zui3pinYyZHw5k2b2sBIuS7qPtdsZwzkIOri29RywwdJ4dt/YiqiJdZsjjfiQgmXDH fv4HK8K7Jmbkrd7l8KX+kVPTkTwT9uftlbKxKWNQ6WOjQnIXF7zxh4z7w3L5k6XD0QET RpJA== X-Gm-Message-State: AOAM530znGxGtyQhqSshUONthDJTNdAAKmfOkedwpYe8H9CXkXz/HQvn u4HsjGdAIY9B6EU38pAgDkiRkQlGJeBIyw== X-Google-Smtp-Source: ABdhPJyXKXdBb+fuVyS8Yn0+pkXgwpRuUuzEuOXAMYs5CxxpmGCrWsN6xeN3PEe8irE+we8l+OBkxg== X-Received: by 2002:a7b:c7cb:: with SMTP id z11mr9558960wmk.102.1626965216396; Thu, 22 Jul 2021 07:46:56 -0700 (PDT) Received: from maple.lan (cpc141216-aztw34-2-0-cust174.18-1.cable.virginm.net. [80.7.220.175]) by smtp.gmail.com with ESMTPSA id z2sm10167362wma.45.2021.07.22.07.46.54 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 22 Jul 2021 07:46:55 -0700 (PDT) From: Daniel Thompson To: Lee Jones , Jingoo Han Cc: Daniel Thompson , Thierry Reding , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , linux-pwm@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, Marek Vasut , stable@vger.kernel.org Subject: [PATCH] backlight: pwm_bl: Improve bootloader/kernel device handover Date: Thu, 22 Jul 2021 15:46:23 +0100 Message-Id: <20210722144623.1572816-1-daniel.thompson@linaro.org> X-Mailer: git-send-email 2.30.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pwm@vger.kernel.org Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Reported-by: Marek Vasut Signed-off-by: Daniel Thompson Cc: stable@vger.kernel.org Acked-by: Marek Vasut Tested-by: Marek Vasut --- drivers/video/backlight/pwm_bl.c | 54 +++++++++++++++++--------------- 1 file changed, 28 insertions(+), 26 deletions(-) base-commit: 2734d6c1b1a089fb593ef6a23d4b70903526fe0c -- 2.30.2 diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index e48fded3e414..8d8959a70e44 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -409,6 +409,33 @@ static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data) static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) { struct device_node *node = pb->dev->of_node; + bool active = true; + + /* + * If the enable GPIO is present, observable (either as input + * or output) and off then the backlight is not currently active. + * */ + if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0) + active = false; + + if (!regulator_is_enabled(pb->power_supply)) + active = false; + + if (!pwm_is_enabled(pb->pwm)) + active = false; + + /* + * Synchronize the enable_gpio with the observed state of the + * hardware. + */ + if (pb->enable_gpio) + gpiod_direction_output(pb->enable_gpio, active); + + /* + * Do not change pb->enabled here! pb->enabled essentially + * tells us if we own one of the regulator's use counts and + * right now we do not. + */ /* Not booted with device tree or no phandle link to the node */ if (!node || !node->phandle) @@ -420,20 +447,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) * assume that another driver will enable the backlight at the * appropriate time. Therefore, if it is disabled, keep it so. */ - - /* if the enable GPIO is disabled, do not enable the backlight */ - if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0) - return FB_BLANK_POWERDOWN; - - /* The regulator is disabled, do not enable the backlight */ - if (!regulator_is_enabled(pb->power_supply)) - return FB_BLANK_POWERDOWN; - - /* The PWM is disabled, keep it like this */ - if (!pwm_is_enabled(pb->pwm)) - return FB_BLANK_POWERDOWN; - - return FB_BLANK_UNBLANK; + return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN; } static int pwm_backlight_probe(struct platform_device *pdev) @@ -486,18 +500,6 @@ static int pwm_backlight_probe(struct platform_device *pdev) goto err_alloc; } - /* - * If the GPIO is not known to be already configured as output, that - * is, if gpiod_get_direction returns either 1 or -EINVAL, change the - * direction to output and set the GPIO as active. - * Do not force the GPIO to active when it was already output as it - * could cause backlight flickering or we would enable the backlight too - * early. Leave the decision of the initial backlight state for later. - */ - if (pb->enable_gpio && - gpiod_get_direction(pb->enable_gpio) != 0) - gpiod_direction_output(pb->enable_gpio, 1); - pb->power_supply = devm_regulator_get(&pdev->dev, "power"); if (IS_ERR(pb->power_supply)) { ret = PTR_ERR(pb->power_supply);