diff mbox series

[03/47] pwm: img: Don't modify HW state in .remove() callback

Message ID 20210707162835.1772882-4-u.kleine-koenig@pengutronix.de
State Accepted
Headers show
Series pwm: Make pwmchip_remove return void | expand

Commit Message

Uwe Kleine-König July 7, 2021, 4:27 p.m. UTC
A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/pwm/pwm-img.c | 16 ----------------
 1 file changed, 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 11b16ecc4f96..18d8e34d0d08 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -326,23 +326,7 @@  static int img_pwm_probe(struct platform_device *pdev)
 static int img_pwm_remove(struct platform_device *pdev)
 {
 	struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
-	u32 val;
-	unsigned int i;
-	int ret;
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put(&pdev->dev);
-		return ret;
-	}
-
-	for (i = 0; i < pwm_chip->chip.npwm; i++) {
-		val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
-		val &= ~BIT(i);
-		img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
-	}
 
-	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		img_pwm_runtime_suspend(&pdev->dev);