diff mbox series

[V2,2/3] pwm: bcm2835: fix period_ns range check

Message ID 1566655788-24949-3-git-send-email-wahrenst@gmx.net
State Accepted
Headers show
Series pwm: bcm2835: Minor fixes | expand

Commit Message

Stefan Wahren Aug. 24, 2019, 2:09 p.m. UTC
The range check for period_ns was written under assumption of a fixed
PWM clock. With clk-bcm2835 driver the PWM clock is a dynamic one.
So fix this by doing the range check on the period register value.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 drivers/pwm/pwm-bcm2835.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--
2.7.4
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index 5276306..2c82386 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -21,7 +21,7 @@ 
 #define PERIOD(x)		(((x) * 0x10) + 0x10)
 #define DUTY(x)			(((x) * 0x10) + 0x14)

-#define MIN_PERIOD		108		/* 9.2 MHz max. PWM clock */
+#define PERIOD_MIN		0x2

 struct bcm2835_pwm {
 	struct pwm_chip chip;
@@ -64,6 +64,7 @@  static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct bcm2835_pwm *pc = to_bcm2835_pwm(chip);
 	unsigned long rate = clk_get_rate(pc->clk);
 	unsigned long scaler;
+	u32 period;

 	if (!rate) {
 		dev_err(pc->dev, "failed to get clock rate\n");
@@ -71,14 +72,14 @@  static int bcm2835_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	}

 	scaler = DIV_ROUND_CLOSEST(NSEC_PER_SEC, rate);
+	period = DIV_ROUND_CLOSEST(period_ns, scaler);

-	if (period_ns <= MIN_PERIOD)
+	if (period < PERIOD_MIN)
 		return -EINVAL;

 	writel(DIV_ROUND_CLOSEST(duty_ns, scaler),
 	       pc->base + DUTY(pwm->hwpwm));
-	writel(DIV_ROUND_CLOSEST(period_ns, scaler),
-	       pc->base + PERIOD(pwm->hwpwm));
+	writel(period, pc->base + PERIOD(pwm->hwpwm));

 	return 0;
 }