Show patches with: Archived = No       |   7465 patches
« 1 2 3 4 … 74 75 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[V2,5/7] ARM: dts: bcm283x: Increase pwm-cells ARM: dts: bcm283x: Improve device-trees and bindings - - 1 - --- 2023-06-17 Stefan Wahren tagr Handled Elsewhere
[V2,4/7] dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML ARM: dts: bcm283x: Improve device-trees and bindings - - 2 - --- 2023-06-17 Stefan Wahren tagr Accepted
[06/10] ARM: dts: bcm283x: Increase pwm-cells ARM: dts: bcm283x: Improve device-trees and bindings - - 1 - --- 2023-06-04 Stefan Wahren tagr Superseded
[05/10] dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML ARM: dts: bcm283x: Improve device-trees and bindings - - 2 - --- 2023-06-04 Stefan Wahren tagr Superseded
[v17,RESEND] pwm: Add Renesas RZ/G2L MTU3a PWM driver [v17,RESEND] pwm: Add Renesas RZ/G2L MTU3a PWM driver - - 1 - --- 2023-06-02 Biju Das tagr Accepted
[v3] pwm: mtk_disp: Fix the disable flow of disp_pwm [v3] pwm: mtk_disp: Fix the disable flow of disp_pwm 1 1 3 1 --- 2023-05-31 Shuijing Li tagr Accepted
[2/7] dt-bindings: pwm: restrict node name suffixes dt-bindings: restrict node name suffixes 1 - 2 - --- 2023-05-30 Krzysztof Kozlowski tagr Accepted
pwm: pca9685: Switch i2c driver back to use .probe() pwm: pca9685: Switch i2c driver back to use .probe() - - - - --- 2023-05-25 Uwe Kleine-König tagr Accepted
pwm: ab8500: Fix error code in probe() pwm: ab8500: Fix error code in probe() - 1 2 - --- 2023-05-22 Dan Carpenter tagr Accepted
[v18,2/2] MAINTAINERS: add pwm to PolarFire SoC entry Microchip Soft IP corePWM driver 1 - - - --- 2023-05-18 Conor Dooley tagr Accepted
[v18,1/2] pwm: add microchip soft ip corePWM driver Microchip Soft IP corePWM driver - - 1 - --- 2023-05-18 Conor Dooley tagr Accepted
pwm: sysfs: Do not apply state to already disabled PWMs pwm: sysfs: Do not apply state to already disabled PWMs - 2 2 - --- 2023-05-12 Marek Vasut tagr Accepted
pwm: imx-tpm: force 'real_period' to be zero in suspend pwm: imx-tpm: force 'real_period' to be zero in suspend 1 1 - - --- 2023-05-05 Clark Wang tagr Accepted
pwm: pwm-meson: remove not needed check in meson_pwm_calc pwm: pwm-meson: remove not needed check in meson_pwm_calc - - 1 - --- 2023-05-04 Heiner Kallweit tagr Superseded
pwm: pwm-meson: fix handling of period/duty if greater than UINT_MAX pwm: pwm-meson: fix handling of period/duty if greater than UINT_MAX - 1 2 - --- 2023-05-03 Heiner Kallweit tagr Superseded
[v3] pwm: meson: modify and simplify calculation in meson_pwm_get_state [v3] pwm: meson: modify and simplify calculation in meson_pwm_get_state 1 1 2 - --- 2023-05-02 Heiner Kallweit tagr Superseded
dt-bindings: pwm: Add R-Car V3U device tree bindings dt-bindings: pwm: Add R-Car V3U device tree bindings 2 - 2 1 --- 2023-05-02 Wolfram Sang tagr Accepted
[v2,1/2] dt-bindings: pwm: imx: add i.MX8QXP compatible [v2,1/2] dt-bindings: pwm: imx: add i.MX8QXP compatible 2 - - - --- 2023-04-24 Alexander Stein tagr Accepted
[v3,2/2] pwm: mediatek: Add support for MT7981 Support PWM on MediaTek MT7981 - - 2 - --- 2023-04-20 Daniel Golle tagr Accepted
[v3,1/2] dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible Support PWM on MediaTek MT7981 1 - 1 - --- 2023-04-20 Daniel Golle tagr Accepted
pwm: sifive: Simplify using devm_clk_get_prepared() pwm: sifive: Simplify using devm_clk_get_prepared() - - 1 - --- 2023-04-18 Uwe Kleine-König tagr Accepted
pwm: clk: Use the devm_clk_get_prepared() helper function pwm: clk: Use the devm_clk_get_prepared() helper function 1 - - - --- 2023-04-16 Christophe JAILLET tagr Accepted
[v2] pwm: Zero-initialize the pwm_state passed to driver's .get_state() [v2] pwm: Zero-initialize the pwm_state passed to driver's .get_state() - - - - --- 2023-03-10 Uwe Kleine-König tagr Accepted
pwm: meson: Explicitly set .polarity in .get_state() pwm: meson: Explicitly set .polarity in .get_state() 1 1 - - --- 2023-03-10 Uwe Kleine-König tagr Accepted
[4/4] pwm: sprd: Explicitly set .polarity in .get_state() pwm: Ensure .polarity is set in .get_state() - 1 - - --- 2023-02-28 Uwe Kleine-König tagr Superseded
[3/4] pwm: iqs620a: Explicitly set .polarity in .get_state() pwm: Ensure .polarity is set in .get_state() - 1 1 - --- 2023-02-28 Uwe Kleine-König tagr Superseded
[2/4] pwm: cros-ec: Explicitly set .polarity in .get_state() pwm: Ensure .polarity is set in .get_state() - 1 1 - --- 2023-02-28 Uwe Kleine-König tagr Superseded
[1/4] pwm: hibvt: Explicitly set .polarity in .get_state() pwm: Ensure .polarity is set in .get_state() - 1 - - --- 2023-02-28 Uwe Kleine-König tagr Superseded
[4/6] pwm: pwm-omap-dmtimer: Fix frequency when using prescaler [1/6] clocksource: timer-ti-dm: Make unexported functions static 1 - - - --- 2018-02-23 Ladislav Michl tagr Changes Requested
[RFC,2/5] pwm: Add support for RZ/G2L GPT Add support for RZ/G2L GPT - - - - --- 2022-04-30 Biju Das ukleinek Superseded
[v6,2/2] pwm: Add clock based PWM output driver Clock based PWM output driver - - - - --- 2022-02-20 Nikita Travkin ukleinek Changes Requested
[v5,2/2] pwm: Add clock based PWM output driver Clock based PWM output driver - - - - --- 2022-02-12 Nikita Travkin ukleinek Changes Requested
[1/3] pwm: driver for qualcomm ipq6018 pwm block [1/3] pwm: driver for qualcomm ipq6018 pwm block - - - - --- 2022-02-07 Baruch Siach ukleinek Changes Requested
[v13,2/2] pwm: Add support for Xilinx AXI Timer [v13,1/2] dt-bindings: pwm: Add Xilinx AXI Timer 1 - - - --- 2022-02-04 Sean Anderson ukleinek Superseded
[v4,2/2] pwm: Add clock based PWM output driver Clock based PWM output driver - - - - --- 2022-01-26 Nikita Travkin ukleinek Superseded
[v3,3/3] pwm: Add clock based PWM output driver Clock based PWM output driver - - - - --- 2022-01-20 Nikita Travkin ukleinek Superseded
[V2] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle [V2] pwm: imx27: workaround of the pwm output bug when decrease the duty cycle - - 1 - --- 2021-12-20 Clark Wang ukleinek Changes Requested
[v12,2/2] pwm: Add support for Xilinx AXI Timer [v12,1/2] dt-bindings: pwm: Add Xilinx AXI Timer 1 - - - --- 2021-12-17 Sean Anderson ukleinek Changes Requested
[v10,1/3] pwm: driver for qualcomm ipq6018 pwm block [v10,1/3] pwm: driver for qualcomm ipq6018 pwm block - - - - --- 2021-12-14 Baruch Siach ukleinek Changes Requested
[v2,2/2] pwm: Add clock based PWM output driver Clock based PWM output driver - - - - --- 2021-12-13 Nikita Travkin ukleinek Changes Requested
[v14,2/2] pwm: Add Aspeed ast2600 PWM support Support pwm driver for aspeed ast26xx - - 1 - --- 2021-11-30 Billy Tsai ukleinek Changes Requested
[v12,2/2] pwm: Add Aspeed ast2600 PWM support Support pwm driver for aspeed ast26xx - - - - --- 2021-09-06 Billy Tsai ukleinek Changes Requested
[v7,2/2] pwm: Add Aspeed ast2600 PWM support Support pwm driver for aspeed ast26xx - - - - --- 2021-05-25 Billy Tsai ukleinek Changes Requested
[v3] backlight: pwm_bl: Disable PWM on shutdown and suspend [v3] backlight: pwm_bl: Disable PWM on shutdown and suspend - 1 - 1 --- 2023-09-26 Uwe Kleine-König New
[v2] backlight: pwm_bl: Disable PWM on shutdown and suspend [v2] backlight: pwm_bl: Disable PWM on shutdown and suspend - 1 - 1 --- 2023-09-26 Uwe Kleine-König Handled Elsewhere
[V12,3/3] arm64: dts: ipq6018: add pwm node Add PWM support for IPQ chipsets - - - - --- 2023-09-25 Devi Priya Changes Requested
[V12,2/3] dt-bindings: pwm: add IPQ6018 binding Add PWM support for IPQ chipsets - - 1 - --- 2023-09-25 Devi Priya Changes Requested
[V12,1/3] pwm: driver for qualcomm ipq6018 pwm block Add PWM support for IPQ chipsets - - - - --- 2023-09-25 Devi Priya New
[v2] leds: pwm: Don't disable the PWM when the LED should be off [v2] leds: pwm: Don't disable the PWM when the LED should be off - 1 1 - --- 2023-09-22 Uwe Kleine-König New
leds: pwm: Don't disable the PWM when the LED should be off leds: pwm: Don't disable the PWM when the LED should be off - 1 1 - --- 2023-09-22 Uwe Kleine-König Superseded
[v2,3/3] ARM: dts: mxs: Switch to #pwm-cells = <3> [v2,1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm - - 1 - --- 2023-09-22 Fabio Estevam Handled Elsewhere
[v2,2/3] dt-bindings: pwm: mxs: Document the clocks property [v2,1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm 1 - 1 - --- 2023-09-22 Fabio Estevam New
[v2,1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm [v2,1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm 2 - - - --- 2023-09-22 Fabio Estevam New
pwm: mxs: Fix zero duty cycle pwm: mxs: Fix zero duty cycle - 1 - 1 --- 2023-09-22 Fabio Estevam Rejected
[v5,4/4] riscv: dts: starfive: jh7100: Add PWM node and pins configuration StarFive's Pulse Width Modulation driver support - - 1 - --- 2023-09-22 William Qiu New
[v5,3/4] riscv: dts: starfive: jh7110: Add PWM node and pins configuration StarFive's Pulse Width Modulation driver support - - 1 - --- 2023-09-22 William Qiu New
[v5,2/4] pwm: starfive: Add PWM driver support StarFive's Pulse Width Modulation driver support - - - - --- 2023-09-22 William Qiu New
[v5,1/4] dt-bindings: pwm: Add StarFive PWM module StarFive's Pulse Width Modulation driver support - - 2 - --- 2023-09-22 William Qiu New
[3/3] dt-bindings: pwm: mxs: Allow passing #pwm-cells = <2> [1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm 1 - - - --- 2023-09-21 Fabio Estevam New
[2/3] dt-bindings: pwm: mxs: Document the clocks property [1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm 1 - 1 - --- 2023-09-21 Fabio Estevam New
[1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm [1/3] dt-bindings: pwm: mxs: Document fsl,imx28-pwm 1 - - - --- 2023-09-21 Fabio Estevam New
[v1] pwm: microchip-core: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE [v1] pwm: microchip-core: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE 1 - - - --- 2023-09-18 Conor Dooley New
[v9,3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-09-18 Billy Tsai New
[v9,2/3] dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-09-18 Billy Tsai New
[v9,1/3] dt-bindings: hwmon: fan: Add fan binding to schema Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-09-18 Billy Tsai New
[v4,37/42] pwm: ep93xx: drop legacy pinctrl ep93xx device tree conversion 3 - - - --- 2023-09-15 Nikita Shubin via B4 Relay New
[v4,18/42] pwm: ep93xx: add DT support for Cirrus EP93xx ep93xx device tree conversion - - 1 - --- 2023-09-15 Nikita Shubin via B4 Relay New
[v4,17/42] dt-bindings: pwm: Add Cirrus EP93xx ep93xx device tree conversion 1 - - - --- 2023-09-15 Nikita Shubin via B4 Relay New
pwm: Adapt sysfs API documentation to reality pwm: Adapt sysfs API documentation to reality - - - - --- 2023-09-11 Uwe Kleine-König New
[v9,6/6] pwm: dwc: add of/platform support designware pwm driver updates - - - - --- 2023-09-07 Ben Dooks New
[v9,5/6] pwm: dwc: round rate divisions up designware pwm driver updates - - - - --- 2023-09-07 Ben Dooks Changes Requested
[v9,4/6] pwm: dwc: use clock rate in hz to avoid rounding issues designware pwm driver updates - - - - --- 2023-09-07 Ben Dooks Changes Requested
[v9,3/6] pwm: dwc: add PWM bit unset in get_state call designware pwm driver updates - - 1 - --- 2023-09-07 Ben Dooks New
[v9,2/6] pwm: dwc: make timer clock configurable designware pwm driver updates - - 1 - --- 2023-09-07 Ben Dooks New
[v9,1/6] pwm: dwc: split pci out of core driver designware pwm driver updates 1 - - - --- 2023-09-07 Ben Dooks New
[GIT,PULL] pwm: Changes for v6.6-rc1 [GIT,PULL] pwm: Changes for v6.6-rc1 - - - - --- 2023-09-07 Thierry Reding Handled Elsewhere
[v2] pwm: atmel: add missing clk_disable_unprepare() [v2] pwm: atmel: add missing clk_disable_unprepare() - - - - --- 2023-09-02 Hari Prasath Gujulan Elango Changes Requested
[v5,2/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx Untitled series #371360 1 - - 1 --- 2023-09-01 Sean Young Handled Elsewhere
[v4,7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme Add support for LUT PPG - - - - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,6/7] leds: rgb: leds-qcom-lpg: Include support for dedicated LUT SDAM PPG Scheme Add support for LUT PPG - - - - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG Add support for LUT PPG - - - - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM Add support for LUT PPG - - - - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,3/7] soc: qcom: add QCOM PBS driver Add support for LUT PPG - - - - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG Add support for LUT PPG - - 1 - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v4,1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings Add support for LUT PPG - - 1 - --- 2023-08-30 Anjelique Melendez Handled Elsewhere
[v8,3/3] hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-08-30 Billy Tsai Superseded
[v8,2/3] dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-08-30 Billy Tsai Superseded
[v8,1/3] dt-bindings: hwmon: fan: Add fan binding to schema Support pwm/tach driver for aspeed ast26xx - - - - --- 2023-08-30 Billy Tsai Superseded
[v4,2/2] dt-bindings: media: remove nokia,n900-ir as pwm-ir-tx is compatible Untitled series #370550 - - - - --- 2023-08-26 Sean Young Superseded
[RFC,v4,4/4] riscv: dts: starfive: jh7100: Add PWM node and pins configuration StarFive's Pulse Width Modulation driver support - - 1 - --- 2023-08-25 William Qiu Changes Requested
[RFC,v4,3/4] riscv: dts: starfive: jh7110: Add PWM node and pins configuration StarFive's Pulse Width Modulation driver support - - 1 - --- 2023-08-25 William Qiu Superseded
[RFC,v4,2/4] pwm: starfive: Add PWM driver support StarFive's Pulse Width Modulation driver support - - - - --- 2023-08-25 William Qiu Changes Requested
[RFC,v4,1/4] dt-bindings: pwm: Add StarFive PWM module StarFive's Pulse Width Modulation driver support - - 2 - --- 2023-08-25 William Qiu Superseded
[v6,3/3] riscv: dts: allwinner: d1: Add pwm node Add support for Allwinner PWM on D1/T113s/R329 SoCs - - - - --- 2023-08-24 Aleksandr Shubin Deferred
[v6,2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support Add support for Allwinner PWM on D1/T113s/R329 SoCs - - - - --- 2023-08-24 Aleksandr Shubin Changes Requested
[v6,1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller Add support for Allwinner PWM on D1/T113s/R329 SoCs - - 1 - --- 2023-08-24 Aleksandr Shubin Deferred
[v3,1/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx [v3,1/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx 1 - - 1 --- 2023-08-22 Sean Young Handled Elsewhere
[v2,1/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx [v2,1/2] media: rc: remove ir-rx51 in favour of generic pwm-ir-tx - - - 1 --- 2023-08-22 Sean Young Superseded
pwm: atmel: add missing clk_disable_unprepare() pwm: atmel: add missing clk_disable_unprepare() - - - - --- 2023-08-22 Hari Prasath Gujulan Elango Changes Requested
[-next,11/11] gpio: zynq: Use helper function devm_clk_get_enabled() gpio: Use devm_clk_get_*() helper function to simplify the drivers. - - 1 - --- 2023-08-18 Li Zetao Handled Elsewhere
« 1 2 3 4 … 74 75 »