mbox series

[v2,0/4] pwm: atmel-tcb: rework device tree binding

Message ID 20201030183658.1007395-1-alexandre.belloni@bootlin.com
Headers show
Series pwm: atmel-tcb: rework device tree binding | expand

Message

Alexandre Belloni Oct. 30, 2020, 6:36 p.m. UTC
Hello,

This was sent as part of a 58 patches series back in 2017. The bindings
were agreed upon back then:

https://lore.kernel.org/linux-arm-kernel/20170607211752.avts3cofvac7ks3q@rob-hp-laptop/

There is still only one user of atmel,tcb-pwm in the tree and I still
think it is worth doing that change now.

The various dependencies are now in v5.9-rc1 so it is ready to be
applied.

I have another series removing atmel_tclib once this is applied.

Changes in v2:
 - rework binding commit message
 - use enum for the pwm node reg values

Alexandre Belloni (4):
  dt-bindings: microchip: atmel,at91rm9200-tcb: add atmel,tcb-pwm
  pwm: atmel-tcb: switch to new binding
  pwm: atmel-tcb: add sama5d2 support
  ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding

 .../devicetree/bindings/pwm/atmel-tcb-pwm.txt |  16 --
 .../soc/microchip/atmel,at91rm9200-tcb.yaml   |  34 ++-
 arch/arm/boot/dts/at91-kizbox.dts             |  45 ++-
 drivers/pwm/Kconfig                           |   3 +-
 drivers/pwm/pwm-atmel-tcb.c                   | 264 ++++++++++--------
 5 files changed, 220 insertions(+), 142 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt

Comments

Thierry Reding Nov. 11, 2020, 8:09 p.m. UTC | #1
On Fri, Oct 30, 2020 at 07:36:54PM +0100, Alexandre Belloni wrote:
> Hello,
> 
> This was sent as part of a 58 patches series back in 2017. The bindings
> were agreed upon back then:
> 
> https://lore.kernel.org/linux-arm-kernel/20170607211752.avts3cofvac7ks3q@rob-hp-laptop/
> 
> There is still only one user of atmel,tcb-pwm in the tree and I still
> think it is worth doing that change now.
> 
> The various dependencies are now in v5.9-rc1 so it is ready to be
> applied.
> 
> I have another series removing atmel_tclib once this is applied.
> 
> Changes in v2:
>  - rework binding commit message
>  - use enum for the pwm node reg values
> 
> Alexandre Belloni (4):
>   dt-bindings: microchip: atmel,at91rm9200-tcb: add atmel,tcb-pwm
>   pwm: atmel-tcb: switch to new binding
>   pwm: atmel-tcb: add sama5d2 support
>   ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding
> 
>  .../devicetree/bindings/pwm/atmel-tcb-pwm.txt |  16 --
>  .../soc/microchip/atmel,at91rm9200-tcb.yaml   |  34 ++-
>  arch/arm/boot/dts/at91-kizbox.dts             |  45 ++-
>  drivers/pwm/Kconfig                           |   3 +-
>  drivers/pwm/pwm-atmel-tcb.c                   | 264 ++++++++++--------
>  5 files changed, 220 insertions(+), 142 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-tcb-pwm.txt

Patches 1-3 applied, thanks.

Thierry