mbox series

[v2,0/1] gpio: mvebu: Add support for multiple PWM lines

Message ID 1536727915-113932-1-git-send-email-aditya@kobol.io
Headers show
Series gpio: mvebu: Add support for multiple PWM lines | expand

Message

Aditya Prayoga Sept. 12, 2018, 4:51 a.m. UTC 
Hi everyone,

Helios4, an Armada 388 based NAS SBC, provides 2 (4-pins) fan connectors.
The PWM pins on both connector are connected to GPIO on bank 1. Current
gpio-mvebu does not allow more than one PWM on the same bank.

Aditya

---

Changes v1->v2:
  * Merge/squash "[Patch 2/2] gpio: mvebu: Allow to use non-default PWM counter"
  * Allow only two PWMs as suggested by Andrew Lunn and Richard Genoud

---

Aditya Prayoga (1):
  gpio: mvebu: Add support for multiple PWM lines per GPIO chip

 drivers/gpio/gpio-mvebu.c | 73 ++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 60 insertions(+), 13 deletions(-)