diff mbox series

[v2,4/8] net: cassini: use pci_status_get_and_clear_errors

Message ID a340836a-172a-38ab-3723-34a21e7e604b@gmail.com
State New
Headers show
Series PCI: add and use constant PCI_STATUS_ERROR_BITS and helper pci_status_get_and_clear_errors | expand

Commit Message

Heiner Kallweit Feb. 25, 2020, 7:11 a.m. UTC 
Use new helper pci_status_get_and_clear_errors() to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/sun/cassini.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c
index 6ec9163e2..e6d1aa882 100644
--- a/drivers/net/ethernet/sun/cassini.c
+++ b/drivers/net/ethernet/sun/cassini.c
@@ -1716,34 +1716,26 @@  static int cas_pci_interrupt(struct net_device *dev, struct cas *cp,
 	pr_cont("\n");
 
 	if (stat & PCI_ERR_OTHER) {
-		u16 cfg;
+		int pci_errs;
 
 		/* Interrogate PCI config space for the
 		 * true cause.
 		 */
-		pci_read_config_word(cp->pdev, PCI_STATUS, &cfg);
-		netdev_err(dev, "Read PCI cfg space status [%04x]\n", cfg);
-		if (cfg & PCI_STATUS_PARITY)
+		pci_errs = pci_status_get_and_clear_errors(cp->pdev);
+
+		netdev_err(dev, "PCI status errors[%04x]\n", pci_errs);
+		if (pci_errs & PCI_STATUS_PARITY)
 			netdev_err(dev, "PCI parity error detected\n");
-		if (cfg & PCI_STATUS_SIG_TARGET_ABORT)
+		if (pci_errs & PCI_STATUS_SIG_TARGET_ABORT)
 			netdev_err(dev, "PCI target abort\n");
-		if (cfg & PCI_STATUS_REC_TARGET_ABORT)
+		if (pci_errs & PCI_STATUS_REC_TARGET_ABORT)
 			netdev_err(dev, "PCI master acks target abort\n");
-		if (cfg & PCI_STATUS_REC_MASTER_ABORT)
+		if (pci_errs & PCI_STATUS_REC_MASTER_ABORT)
 			netdev_err(dev, "PCI master abort\n");
-		if (cfg & PCI_STATUS_SIG_SYSTEM_ERROR)
+		if (pci_errs & PCI_STATUS_SIG_SYSTEM_ERROR)
 			netdev_err(dev, "PCI system error SERR#\n");
-		if (cfg & PCI_STATUS_DETECTED_PARITY)
+		if (pci_errs & PCI_STATUS_DETECTED_PARITY)
 			netdev_err(dev, "PCI parity error\n");
-
-		/* Write the error bits back to clear them. */
-		cfg &= (PCI_STATUS_PARITY |
-			PCI_STATUS_SIG_TARGET_ABORT |
-			PCI_STATUS_REC_TARGET_ABORT |
-			PCI_STATUS_REC_MASTER_ABORT |
-			PCI_STATUS_SIG_SYSTEM_ERROR |
-			PCI_STATUS_DETECTED_PARITY);
-		pci_write_config_word(cp->pdev, PCI_STATUS, cfg);
 	}
 
 	/* For all PCI errors, we should reset the chip. */