diff mbox series

[v4,20/25] PCI/PME: Use PCI_POSSIBLE_ERROR() to check read from hardware

Message ID 679ce049bccf10df3ca9ef4918ee2c3235afdaea.1637243717.git.naveennaidu479@gmail.com
State New
Headers show
Series Unify PCI error response checking | expand

Commit Message

Naveen Naidu Nov. 18, 2021, 2:03 p.m. UTC 
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use PCI_POSSIBLE_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Compile tested only.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/pcie/pme.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 1d0dd77fed3a..ef8ce436ead9 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -224,7 +224,7 @@  static void pcie_pme_work_fn(struct work_struct *work)
 			break;
 
 		pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
-		if (rtsta == (u32) ~0)
+		if (PCI_POSSIBLE_ERROR(rtsta))
 			break;
 
 		if (rtsta & PCI_EXP_RTSTA_PME) {
@@ -274,7 +274,7 @@  static irqreturn_t pcie_pme_irq(int irq, void *context)
 	spin_lock_irqsave(&data->lock, flags);
 	pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
 
-	if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
+	if (PCI_POSSIBLE_ERROR(rtsta) || !(rtsta & PCI_EXP_RTSTA_PME)) {
 		spin_unlock_irqrestore(&data->lock, flags);
 		return IRQ_NONE;
 	}