| Message ID | 20240423-opp_support-v11-4-15fdd40b0f95@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: qcom: Add support for OPP | expand |
On Tue, Apr 23, 2024 at 02:36:58PM +0530, Krishna chaitanya chundru wrote: > PCIe host controller driver needs to choose the appropriate performance > state of RPMh power domain and interconnect bandwidth based on the PCIe > data rate. > > Hence, add the OPP table support to specify RPMh performance states and > interconnect peak bandwidth. > > It should be noted that the different link configurations may share the > same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1 > link have the same bandwidth and share the same OPP entry. > > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > arch/arm64/boot/dts/qcom/sm8450.dtsi | 77 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 77 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 615296e13c43..2e047aba220b 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -1855,7 +1855,35 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > pinctrl-names = "default"; > pinctrl-0 = <&pcie0_default_state>; > > + operating-points-v2 = <&pcie0_opp_table>; > + > status = "disabled"; > + > + pcie0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + /* GEN 1 x1 */ > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; > + }; > + > + /* GEN 2 x1 */ > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + /* GEN 3 x1 */ > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + }; > + > }; > > pcie0_phy: phy@1c06000 { > @@ -1982,7 +2010,56 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > pinctrl-names = "default"; > pinctrl-0 = <&pcie1_default_state>; > > + operating-points-v2 = <&pcie1_opp_table>; > + > status = "disabled"; > + > + pcie1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + /* GEN 1 x1 */ > + opp-2500000 { > + opp-hz = /bits/ 64 <2500000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <250000 1>; > + }; > + > + /* GEN 1 x2 and GEN 2 x1 */ > + opp-5000000 { > + opp-hz = /bits/ 64 <5000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <500000 1>; > + }; > + > + /* GEN 2 x2 */ > + opp-10000000 { > + opp-hz = /bits/ 64 <10000000>; > + required-opps = <&rpmhpd_opp_low_svs>; > + opp-peak-kBps = <1000000 1>; > + }; > + > + /* GEN 3 x1 */ > + opp-8000000 { > + opp-hz = /bits/ 64 <8000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <984500 1>; > + }; > + > + /* GEN 3 x2 and GEN 4 x1 */ > + opp-16000000 { > + opp-hz = /bits/ 64 <16000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <1969000 1>; > + }; > + > + /* GEN 4 x2 */ > + opp-32000000 { > + opp-hz = /bits/ 64 <32000000>; > + required-opps = <&rpmhpd_opp_nom>; > + opp-peak-kBps = <3938000 1>; > + }; > + }; > + > }; > > pcie1_phy: phy@1c0e000 { > > -- > 2.42.0 >
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 615296e13c43..2e047aba220b 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1855,7 +1855,35 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + }; + }; pcie0_phy: phy@1c06000 { @@ -1982,7 +2010,56 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 1 x2 and GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + + /* GEN 2 x2 */ + opp-10000000 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + }; + + /* GEN 3 x1 */ + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <984500 1>; + }; + + /* GEN 3 x2 and GEN 4 x1 */ + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + }; + + /* GEN 4 x2 */ + opp-32000000 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <3938000 1>; + }; + }; + }; pcie1_phy: phy@1c0e000 {
PCIe host controller driver needs to choose the appropriate performance state of RPMh power domain and interconnect bandwidth based on the PCIe data rate. Hence, add the OPP table support to specify RPMh performance states and interconnect peak bandwidth. It should be noted that the different link configurations may share the same aggregate bandwidth, e.g., a 2.5 GT/s x2 link and a 5.0 GT/s x1 link have the same bandwidth and share the same OPP entry. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 77 ++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+)