new file mode 100644
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775p PCI Express Root Complex
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
+ DesignWare PCIe IP.
+
+properties:
+ compatible:
+ const: qcom,pcie-sa8775p
+
+ reg:
+ minItems: 6
+ maxItems: 6
+
+ reg-names:
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ clocks:
+ minItems: 5
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+
+ interrupts:
+ minItems: 8
+ maxItems: 8
+
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: pci
+
+required:
+ - interconnects
+ - interconnect-names
+
+allOf:
+ - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@1c00000 {
+ compatible = "qcom,pcie-sa8775p";
+ reg = <0x0 0x01c00000 0x0 0x3000>,
+ <0x0 0x40000000 0x0 0xf20>,
+ <0x0 0x40000f20 0x0 0xa8>,
+ <0x0 0x40001000 0x0 0x4000>,
+ <0x0 0x40100000 0x0 0x100000>,
+ <0x0 0x01c03000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+ clock-names = "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a";
+
+ dma-coherent;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi0",
+ "msi1",
+ "msi2",
+ "msi3",
+ "msi4",
+ "msi5",
+ "msi6",
+ "msi7";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+ interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+
+ iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+ <0x100 &pcie_smmu 0x0001 0x1>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
@@ -28,7 +28,6 @@ properties:
- qcom,pcie-ipq8074-gen3
- qcom,pcie-msm8996
- qcom,pcie-qcs404
- - qcom,pcie-sa8775p
- qcom,pcie-sdm845
- qcom,pcie-sdx55
- items:
@@ -200,7 +199,6 @@ allOf:
compatible:
contains:
enum:
- - qcom,pcie-sa8775p
- qcom,pcie-sdx55
then:
properties:
@@ -495,41 +493,6 @@ allOf:
items:
- const: pci # PCIe core reset
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8775p
- then:
- properties:
- clocks:
- minItems: 5
- maxItems: 5
- clock-names:
- items:
- - const: aux # Auxiliary clock
- - const: cfg # Configuration clock
- - const: bus_master # Master AXI clock
- - const: bus_slave # Slave AXI clock
- - const: slave_q2a # Slave Q2A clock
- resets:
- maxItems: 1
- reset-names:
- items:
- - const: pci # PCIe core reset
-
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,pcie-sa8775p
- then:
- required:
- - interconnects
- - interconnect-names
-
- if:
not:
properties:
@@ -565,7 +528,6 @@ allOf:
contains:
enum:
- qcom,pcie-msm8996
- - qcom,pcie-sa8775p
- qcom,pcie-sdm845
then:
oneOf:
Move SA8775p PCIe devices from qcom,pcie.yaml binding to a dedicated file to make reviewing easier. This creates equivalent schema file, except: - Missing required compatible which is actually redundant. - Expecting eight MSI interrupts, instead of only one, which was incomplete hardware description. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/pci/qcom,pcie-sa8775p.yaml | 166 +++++++++++++++++++++ .../devicetree/bindings/pci/qcom,pcie.yaml | 38 ----- 2 files changed, 166 insertions(+), 38 deletions(-)