| Message ID | 20240201-pme_msg-v2-6-6767052fe6a4@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: dwc: Add common pme_turn_off message by using outbound iATU | expand |
On Thu, Feb 01, 2024 at 11:13:30AM -0500, Frank Li wrote: > Set outbound ATU map memory write to send PCI message. So one MMIO write > can trigger a PCI message, such as PME_Turn_Off. > > Add common dw_pcie_send_pme_turn_off_by_atu() function. > ... > - if (!pci->pp.ops->pme_turn_off) > - return 0; > + if (pci->pp.ops->pme_turn_off) > + pci->pp.ops->pme_turn_off(&pci->pp); > + else > + ret = dw_pcie_send_pme_turn_off_by_atu(pci); I think it's nice if function names match the function pointer names. E.g., we currently already have: .pme_turn_off = ls_pcie_send_turnoff_msg, .pme_turn_off = ls1021a_pcie_send_turnoff_msg, .pme_turn_off = ls1043a_pcie_send_turnoff_msg, which is slightly annoying because it's always useful to compare implementations, but "git grep pme_turn_off" doesn't find the actual functions, so I wish these were named "ls_pcie_pme_turn_off()", etc. You don't have to fix those existing layerscape ones now, but I think the same applies to dw_pcie_send_pme_turn_off_by_atu(): it would be nice if it were named something like "dw_pcie_pme_turn_off()" so grep/cscope would find it easily. Bjorn
On Thu, Feb 01, 2024 at 12:03:49PM -0600, Bjorn Helgaas wrote: > On Thu, Feb 01, 2024 at 11:13:30AM -0500, Frank Li wrote: > > Set outbound ATU map memory write to send PCI message. So one MMIO write > > can trigger a PCI message, such as PME_Turn_Off. > > > > Add common dw_pcie_send_pme_turn_off_by_atu() function. > > ... > > > - if (!pci->pp.ops->pme_turn_off) > > - return 0; > > + if (pci->pp.ops->pme_turn_off) > > + pci->pp.ops->pme_turn_off(&pci->pp); > > + else > > + ret = dw_pcie_send_pme_turn_off_by_atu(pci); > > I think it's nice if function names match the function pointer names. > > E.g., we currently already have: > > .pme_turn_off = ls_pcie_send_turnoff_msg, > .pme_turn_off = ls1021a_pcie_send_turnoff_msg, > .pme_turn_off = ls1043a_pcie_send_turnoff_msg, > > which is slightly annoying because it's always useful to compare > implementations, but "git grep pme_turn_off" doesn't find the actual > functions, so I wish these were named "ls_pcie_pme_turn_off()", etc. > > You don't have to fix those existing layerscape ones now, but I think > the same applies to dw_pcie_send_pme_turn_off_by_atu(): it would be > nice if it were named something like "dw_pcie_pme_turn_off()" so > grep/cscope would find it easily. Okay, these funcition can be removed because this patch. But It takes some time to test it at these platform. Add need dts update also. There are still long road. Frank > > Bjorn
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 267687ab33cbc..2a281060f3aad 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -728,6 +728,8 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp) dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n", pci->num_ob_windows); + pci->msg_atu_index = i; + i = 0; resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) { if (resource_type(entry->res) != IORESOURCE_MEM) @@ -833,11 +835,49 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp) } EXPORT_SYMBOL_GPL(dw_pcie_setup_rc); +static int dw_pcie_send_pme_turn_off_by_atu(struct dw_pcie *pci) +{ + struct dw_pcie_ob_atu_cfg atu = { 0 }; + void __iomem *m; + int ret = 0; + + if (pci->num_ob_windows <= pci->msg_atu_index) + return -EINVAL; + + atu.code = PCI_MSG_CODE_PME_TURN_OFF; + atu.routing = PCI_MSG_TYPE_R_BC; + atu.type = PCIE_ATU_TYPE_MSG; + atu.size = pci->msg_io_size; + + if (!atu.size) { + dev_dbg(pci->dev, + "atu memory map windows is zero, please check 'msg' reg in dts\n"); + return -ENOMEM; + } + + atu.cpu_addr = pci->msg_io_base; + + ret = dw_pcie_prog_outbound_atu(pci, &atu); + if (ret) + return ret; + + m = ioremap(atu.cpu_addr, PAGE_SIZE); + if (!m) + return -ENOMEM; + + /* A dummy write is converted to a Msg TLP */ + writel(0, m); + + iounmap(m); + + return ret; +} + int dw_pcie_suspend_noirq(struct dw_pcie *pci) { u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); u32 val; - int ret; + int ret = 0; /* * If L1SS is supported, then do not put the link into L2 as some @@ -849,10 +889,13 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci) if (dw_pcie_get_ltssm(pci) <= DW_PCIE_LTSSM_DETECT_ACT) return 0; - if (!pci->pp.ops->pme_turn_off) - return 0; + if (pci->pp.ops->pme_turn_off) + pci->pp.ops->pme_turn_off(&pci->pp); + else + ret = dw_pcie_send_pme_turn_off_by_atu(pci); - pci->pp.ops->pme_turn_off(&pci->pp); + if (ret) + return ret; ret = read_poll_timeout(dw_pcie_get_ltssm, val, val == DW_PCIE_LTSSM_L2_IDLE, PCIE_PME_TO_L2_TIMEOUT_US/10, diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index ba909fade9db1..eb24362009bb6 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -155,6 +155,14 @@ int dw_pcie_get_resources(struct dw_pcie *pci) } } + if (!pci->msg_io_base) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "msg"); + if (res) { + pci->msg_io_base = res->start; + pci->msg_io_size = res->end - res->start + 1; + } + } + /* LLDD is supposed to manually switch the clocks and resets state */ if (dw_pcie_cap_is(pci, REQ_RES)) { ret = dw_pcie_get_clocks(pci); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 703b50bc5e0f1..866ab44df9fd1 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -424,6 +424,9 @@ struct dw_pcie { struct reset_control_bulk_data core_rsts[DW_PCIE_NUM_CORE_RSTS]; struct gpio_desc *pe_rst; bool suspended; + int msg_atu_index; + phys_addr_t msg_io_base; + size_t msg_io_size; }; #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
Set outbound ATU map memory write to send PCI message. So one MMIO write can trigger a PCI message, such as PME_Turn_Off. Add common dw_pcie_send_pme_turn_off_by_atu() function. Call dw_pcie_send_pme_turn_off_by_atu() to send out PME_Turn_Off message in general dw_pcie_suspend_noirq() if there are not platform callback pme_turn_off() exist. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- drivers/pci/controller/dwc/pcie-designware-host.c | 51 +++++++++++++++++++++-- drivers/pci/controller/dwc/pcie-designware.c | 8 ++++ drivers/pci/controller/dwc/pcie-designware.h | 3 ++ 3 files changed, 58 insertions(+), 4 deletions(-)