diff mbox series

[3/6] PCI: dwc: Add outbound MSG TLPs support

Message ID 20240130-pme_msg-v1-3-d52b0add5c7c@nxp.com
State New
Headers show
Series PCI: dwc: Add common pme_turn_off message by using outbound iATU | expand

Commit Message

Frank Li Jan. 31, 2024, 12:45 a.m. UTC 
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
INTx IRQs by iATU in the PCIe endpoint mode in near the future.
PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
MsgD. So, this implementation supports the data-less messages only
for now.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
 drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
 2 files changed, 11 insertions(+), 2 deletions(-)

Comments

Yoshihiro Shimoda Feb. 1, 2024, 3:07 a.m. UTC | #1 
Hi Frank,

> From: Frank Li, Sent: Wednesday, January 31, 2024 9:45 AM
> 
> From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> 
> Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
> INTx IRQs by iATU in the PCIe endpoint mode in near the future.
> PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
> MsgD. So, this implementation supports the data-less messages only
> for now.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Perhaps, your Signed-off-by is needed here?

Best regards,
Yoshihiro Shimoda

> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
>  drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
>  2 files changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index df2575ec5f44c..ba909fade9db1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -499,7 +499,7 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
>  	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_UPPER_TARGET,
>  			      upper_32_bits(atu->pci_addr));
> 
> -	val = atu->type | PCIE_ATU_FUNC_NUM(atu->func_no);
> +	val = atu->type | atu->routing | PCIE_ATU_FUNC_NUM(atu->func_no);
>  	if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) &&
>  	    dw_pcie_ver_is_ge(pci, 460A))
>  		val |= PCIE_ATU_INCREASE_REGION_SIZE;
> @@ -507,7 +507,12 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
>  		val = dw_pcie_enable_ecrc(val);
>  	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL1, val);
> 
> -	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
> +	val = PCIE_ATU_ENABLE;
> +	if (atu->type == PCIE_ATU_TYPE_MSG) {
> +		/* The data-less messages only for now */
> +		val |= PCIE_ATU_INHIBIT_PAYLOAD | atu->code;
> +	}
> +	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, val);
> 
>  	/*
>  	 * Make sure ATU enable takes effect before any subsequent config
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index d21db82e586d5..703b50bc5e0f1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -148,11 +148,13 @@
>  #define PCIE_ATU_TYPE_IO		0x2
>  #define PCIE_ATU_TYPE_CFG0		0x4
>  #define PCIE_ATU_TYPE_CFG1		0x5
> +#define PCIE_ATU_TYPE_MSG		0x10
>  #define PCIE_ATU_TD			BIT(8)
>  #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
>  #define PCIE_ATU_REGION_CTRL2		0x004
>  #define PCIE_ATU_ENABLE			BIT(31)
>  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> +#define PCIE_ATU_INHIBIT_PAYLOAD	BIT(22)
>  #define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
>  #define PCIE_ATU_LOWER_BASE		0x008
>  #define PCIE_ATU_UPPER_BASE		0x00C
> @@ -303,6 +305,8 @@ struct dw_pcie_ob_atu_cfg {
>  	int index;
>  	int type;
>  	u8 func_no;
> +	u8 code;
> +	u8 routing;
>  	u64 cpu_addr;
>  	u64 pci_addr;
>  	u64 size;
> 
> --
> 2.34.1
Frank Li Feb. 1, 2024, 4:18 a.m. UTC | #2 
On Thu, Feb 01, 2024 at 03:07:24AM +0000, Yoshihiro Shimoda wrote:
> Hi Frank,
> 
> > From: Frank Li, Sent: Wednesday, January 31, 2024 9:45 AM
> > 
> > From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > 
> > Add "code" and "routing" into struct dw_pcie_ob_atu_cfg for triggering
> > INTx IRQs by iATU in the PCIe endpoint mode in near the future.
> > PCIE_ATU_INHIBIT_PAYLOAD is set to issue TLP type of Msg instead of
> > MsgD. So, this implementation supports the data-less messages only
> > for now.
> > 
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Perhaps, your Signed-off-by is needed here?

Yes, I will add at next version.

Frank
> 
> Best regards,
> Yoshihiro Shimoda
> 
> > ---
> >  drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h | 4 ++++
> >  2 files changed, 11 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index df2575ec5f44c..ba909fade9db1 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -499,7 +499,7 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
> >  	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_UPPER_TARGET,
> >  			      upper_32_bits(atu->pci_addr));
> > 
> > -	val = atu->type | PCIE_ATU_FUNC_NUM(atu->func_no);
> > +	val = atu->type | atu->routing | PCIE_ATU_FUNC_NUM(atu->func_no);
> >  	if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) &&
> >  	    dw_pcie_ver_is_ge(pci, 460A))
> >  		val |= PCIE_ATU_INCREASE_REGION_SIZE;
> > @@ -507,7 +507,12 @@ int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
> >  		val = dw_pcie_enable_ecrc(val);
> >  	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL1, val);
> > 
> > -	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
> > +	val = PCIE_ATU_ENABLE;
> > +	if (atu->type == PCIE_ATU_TYPE_MSG) {
> > +		/* The data-less messages only for now */
> > +		val |= PCIE_ATU_INHIBIT_PAYLOAD | atu->code;
> > +	}
> > +	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, val);
> > 
> >  	/*
> >  	 * Make sure ATU enable takes effect before any subsequent config
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index d21db82e586d5..703b50bc5e0f1 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -148,11 +148,13 @@
> >  #define PCIE_ATU_TYPE_IO		0x2
> >  #define PCIE_ATU_TYPE_CFG0		0x4
> >  #define PCIE_ATU_TYPE_CFG1		0x5
> > +#define PCIE_ATU_TYPE_MSG		0x10
> >  #define PCIE_ATU_TD			BIT(8)
> >  #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
> >  #define PCIE_ATU_REGION_CTRL2		0x004
> >  #define PCIE_ATU_ENABLE			BIT(31)
> >  #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
> > +#define PCIE_ATU_INHIBIT_PAYLOAD	BIT(22)
> >  #define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
> >  #define PCIE_ATU_LOWER_BASE		0x008
> >  #define PCIE_ATU_UPPER_BASE		0x00C
> > @@ -303,6 +305,8 @@ struct dw_pcie_ob_atu_cfg {
> >  	int index;
> >  	int type;
> >  	u8 func_no;
> > +	u8 code;
> > +	u8 routing;
> >  	u64 cpu_addr;
> >  	u64 pci_addr;
> >  	u64 size;
> > 
> > --
> > 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index df2575ec5f44c..ba909fade9db1 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -499,7 +499,7 @@  int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
 	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_UPPER_TARGET,
 			      upper_32_bits(atu->pci_addr));
 
-	val = atu->type | PCIE_ATU_FUNC_NUM(atu->func_no);
+	val = atu->type | atu->routing | PCIE_ATU_FUNC_NUM(atu->func_no);
 	if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) &&
 	    dw_pcie_ver_is_ge(pci, 460A))
 		val |= PCIE_ATU_INCREASE_REGION_SIZE;
@@ -507,7 +507,12 @@  int dw_pcie_prog_outbound_atu(struct dw_pcie *pci,
 		val = dw_pcie_enable_ecrc(val);
 	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL1, val);
 
-	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE);
+	val = PCIE_ATU_ENABLE;
+	if (atu->type == PCIE_ATU_TYPE_MSG) {
+		/* The data-less messages only for now */
+		val |= PCIE_ATU_INHIBIT_PAYLOAD | atu->code;
+	}
+	dw_pcie_writel_atu_ob(pci, atu->index, PCIE_ATU_REGION_CTRL2, val);
 
 	/*
 	 * Make sure ATU enable takes effect before any subsequent config
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index d21db82e586d5..703b50bc5e0f1 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -148,11 +148,13 @@ 
 #define PCIE_ATU_TYPE_IO		0x2
 #define PCIE_ATU_TYPE_CFG0		0x4
 #define PCIE_ATU_TYPE_CFG1		0x5
+#define PCIE_ATU_TYPE_MSG		0x10
 #define PCIE_ATU_TD			BIT(8)
 #define PCIE_ATU_FUNC_NUM(pf)           ((pf) << 20)
 #define PCIE_ATU_REGION_CTRL2		0x004
 #define PCIE_ATU_ENABLE			BIT(31)
 #define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
+#define PCIE_ATU_INHIBIT_PAYLOAD	BIT(22)
 #define PCIE_ATU_FUNC_NUM_MATCH_EN      BIT(19)
 #define PCIE_ATU_LOWER_BASE		0x008
 #define PCIE_ATU_UPPER_BASE		0x00C
@@ -303,6 +305,8 @@  struct dw_pcie_ob_atu_cfg {
 	int index;
 	int type;
 	u8 func_no;
+	u8 code;
+	u8 routing;
 	u64 cpu_addr;
 	u64 pci_addr;
 	u64 size;