diff mbox series

[v2,03/15] pciutils-lspci: Add Lane Margining support to the lspci

Message ID 20231227094504.32257-4-n.proshkin@yadro.com
State New
Headers show
Series pciutils: Add utility for Lane Margining | expand

Commit Message

Nikita Proshkin Dec. 27, 2023, 9:44 a.m. UTC 
Gather all the info available without writing to the config space.
Without any commands margining capability exposes only 3 status bits to
read through Margining Port Capabilities and Margining Port Status registers.
It makes sense to show them anyway. For example, Margining Ready bit
indicates whether the device is actually ready for the margining process.

Reviewed-by: Sergei Miroshnichenko <s.miroshnichenko@yadro.com>
Signed-off-by: Nikita Proshkin <n.proshkin@yadro.com>
---
 ls-ecaps.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/ls-ecaps.c b/ls-ecaps.c
index 6d2e7b0..9810044 100644
--- a/ls-ecaps.c
+++ b/ls-ecaps.c
@@ -691,6 +691,26 @@  cap_rcec(struct device *d, int where)
     printf("\t\tAssociatedBusNumbers: %02x-%02x\n", nextbusn, lastbusn );
 }
 
+static void
+cap_lmr(struct device *d, int where)
+{
+  printf("Lane Margining at the Receiver\n");
+
+  if (verbose < 2)
+    return;
+
+  if (!config_fetch(d, where, 8))
+    return;
+
+  u16 port_caps = get_conf_word(d, where + PCI_LMR_CAPS);
+  u16 port_status = get_conf_word(d, where + PCI_LMR_PORT_STS);
+
+  printf("\t\tPortCap: Uses Driver%c\n", FLAG(port_caps, PCI_LMR_CAPS_DRVR));
+  printf("\t\tPortSta: MargReady%c MargSoftReady%c\n",
+         FLAG(port_status, PCI_LMR_PORT_STS_READY),
+         FLAG(port_status, PCI_LMR_PORT_STS_SOFT_READY));
+}
+
 static void
 cxl_range(u64 base, u64 size, int n)
 {
@@ -1610,7 +1630,7 @@  show_ext_caps(struct device *d, int type)
 	    printf("Physical Layer 16.0 GT/s <?>\n");
 	    break;
 	  case PCI_EXT_CAP_ID_LMR:
-	    printf("Lane Margining at the Receiver <?>\n");
+	    cap_lmr(d, where);
 	    break;
 	  case PCI_EXT_CAP_ID_HIER_ID:
 	    printf("Hierarchy ID <?>\n");