@@ -60,6 +60,9 @@ enum imx6_pcie_variants {
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1)
#define IMX6_PCIE_FLAG_SUPPORTS_SUSPEND BIT(2)
+#define IMX6_PCIE_FLAG_HAS_PHY BIT(3)
+
+#define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
#define IMX6_PCIE_MAX_CLKS 6
@@ -1277,6 +1280,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
if (ret)
return ret;
+ if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_PHY)) {
+ imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+ if (IS_ERR(imx6_pcie->phy))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
+ "failed to get pcie phy\n");
+ }
+
switch (imx6_pcie->drvdata->variant) {
case IMX7D:
if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
@@ -1306,11 +1316,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
return dev_err_probe(dev, PTR_ERR(imx6_pcie->apps_reset),
"failed to get pcie apps reset control\n");
- imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
- if (IS_ERR(imx6_pcie->phy))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->phy),
- "failed to get pcie phy\n");
-
break;
default:
break;
@@ -1444,13 +1449,15 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM] = {
.variant = IMX8MM,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_HAS_PHY,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
},
[IMX8MP] = {
.variant = IMX8MP,
- .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND |
+ IMX6_PCIE_FLAG_HAS_PHY,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
},
@@ -1462,12 +1469,14 @@ static const struct imx6_pcie_drvdata drvdata[] = {
},
[IMX8MM_EP] = {
.variant = IMX8MM_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_PHY,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mm-iomuxc-gpr",
.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
},
[IMX8MP_EP] = {
.variant = IMX8MP_EP,
+ .flags = IMX6_PCIE_FLAG_HAS_PHY,
.mode = DW_PCIE_EP_TYPE,
.gpr = "fsl,imx8mp-iomuxc-gpr",
.clk_names = {"pcie_bus", "pcie", "pcie_aux"},
Refactors the phy handling logic in the imx6 PCI driver by adding IMX6_PCIE_FLAG_HAS_PHY bitmask define for drvdata::flags. The drvdata::flags and a bitmask ensures a cleaner and more scalable switch-case structure for handling phy. Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Notes: Change from v4 to v5: - none, Keep IMX6_PCIE_FLAG_HAS_PHY to indicate dts mismatch when platform require phy suppport. Change from v1 to v3: - none drivers/pci/controller/dwc/pci-imx6.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)