diff mbox series

[v4,07/41] drm: handle HAS_IOPORT dependencies

Message ID 20230516110038.2413224-8-schnelle@linux.ibm.com
State New
Headers show
Series treewide: Remove I/O port accessors for HAS_IOPORT=n | expand

Commit Message

Niklas Schnelle May 16, 2023, 11 a.m. UTC
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them. In the bochs driver there is optional MMIO
support detected at runtime, warn if this isn't taken when
HAS_IOPORT is not defined.

There is also a direct and hard coded use in cirrus.c which according to
the comment is only necessary during resume.  Let's just skip this as
for example s390 which doesn't have I/O port support also doesen't
support suspend/resume.

Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
      per-subsystem patches may be applied independently

 drivers/gpu/drm/qxl/Kconfig   |  1 +
 drivers/gpu/drm/tiny/bochs.c  | 17 +++++++++++++++++
 drivers/gpu/drm/tiny/cirrus.c |  2 ++
 3 files changed, 20 insertions(+)

Comments

Thomas Zimmermann May 16, 2023, 5:13 p.m. UTC | #1
Hi

Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
> not being declared. We thus need to add HAS_IOPORT as dependency for
> those drivers using them. In the bochs driver there is optional MMIO
> support detected at runtime, warn if this isn't taken when
> HAS_IOPORT is not defined.
> 
> There is also a direct and hard coded use in cirrus.c which according to
> the comment is only necessary during resume.  Let's just skip this as
> for example s390 which doesn't have I/O port support also doesen't
> support suspend/resume.
> 
> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
> ---
> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>        per-subsystem patches may be applied independently
> 
>   drivers/gpu/drm/qxl/Kconfig   |  1 +
>   drivers/gpu/drm/tiny/bochs.c  | 17 +++++++++++++++++
>   drivers/gpu/drm/tiny/cirrus.c |  2 ++

There are more invocations in gma500. See[1]

[1] 
https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30

>   3 files changed, 20 insertions(+)
> 
> diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
> index ca3f51c2a8fe..d0e0d440c8d9 100644
> --- a/drivers/gpu/drm/qxl/Kconfig
> +++ b/drivers/gpu/drm/qxl/Kconfig
> @@ -2,6 +2,7 @@
>   config DRM_QXL
>   	tristate "QXL virtual GPU"
>   	depends on DRM && PCI && MMU
> +	depends on HAS_IOPORT
>   	select DRM_KMS_HELPER
>   	select DRM_TTM
>   	select DRM_TTM_HELPER
> diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
> index d254679a136e..3710339407cc 100644
> --- a/drivers/gpu/drm/tiny/bochs.c
> +++ b/drivers/gpu/drm/tiny/bochs.c
> @@ -2,6 +2,7 @@
>   
>   #include <linux/module.h>
>   #include <linux/pci.h>
> +#include <asm/bug.h>

<linux/bug.h> please.

Best regards
Thomas

>   
>   #include <drm/drm_aperture.h>
>   #include <drm/drm_atomic_helper.h>
> @@ -105,7 +106,9 @@ static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
>   
>   		writeb(val, bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outb(val, ioport);
> +#endif
>   	}
>   }
>   
> @@ -119,7 +122,11 @@ static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
>   
>   		return readb(bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		return inb(ioport);
> +#else
> +		return 0xff;
> +#endif
>   	}
>   }
>   
> @@ -132,8 +139,12 @@ static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
>   
>   		ret = readw(bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outw(reg, VBE_DISPI_IOPORT_INDEX);
>   		ret = inw(VBE_DISPI_IOPORT_DATA);
> +#else
> +		ret = 0xffff;
> +#endif
>   	}
>   	return ret;
>   }
> @@ -145,8 +156,10 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
>   
>   		writew(val, bochs->mmio + offset);
>   	} else {
> +#ifdef CONFIG_HAS_IOPORT
>   		outw(reg, VBE_DISPI_IOPORT_INDEX);
>   		outw(val, VBE_DISPI_IOPORT_DATA);
> +#endif
>   	}
>   }
>   
> @@ -229,6 +242,10 @@ static int bochs_hw_init(struct drm_device *dev)
>   			return -ENOMEM;
>   		}
>   	} else {
> +		if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
> +			DRM_ERROR("I/O ports are not supported\n");
> +			return -EIO;
> +		}
>   		ioaddr = VBE_DISPI_IOPORT_INDEX;
>   		iosize = 2;
>   		if (!request_region(ioaddr, iosize, "bochs-drm")) {
> diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
> index 594bc472862f..c65fea049bc7 100644
> --- a/drivers/gpu/drm/tiny/cirrus.c
> +++ b/drivers/gpu/drm/tiny/cirrus.c
> @@ -508,8 +508,10 @@ static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc,
>   
>   	cirrus_mode_set(cirrus, &crtc_state->mode);
>   
> +#ifdef CONFIG_HAS_IOPORT
>   	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
>   	outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W);
> +#endif
>   
>   	drm_dev_exit(idx);
>   }
Arnd Bergmann May 16, 2023, 5:47 p.m. UTC | #2
On Tue, May 16, 2023, at 19:13, Thomas Zimmermann wrote:
>
> Am 16.05.23 um 13:00 schrieb Niklas Schnelle:
>> In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
>> not being declared. We thus need to add HAS_IOPORT as dependency for
>> those drivers using them. In the bochs driver there is optional MMIO
>> support detected at runtime, warn if this isn't taken when
>> HAS_IOPORT is not defined.
>> 
>> There is also a direct and hard coded use in cirrus.c which according to
>> the comment is only necessary during resume.  Let's just skip this as
>> for example s390 which doesn't have I/O port support also doesen't
>> support suspend/resume.
>> 
>> Co-developed-by: Arnd Bergmann <arnd@kernel.org>
>> Signed-off-by: Arnd Bergmann <arnd@kernel.org>
>> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
>> ---
>> Note: The HAS_IOPORT Kconfig option was added in v6.4-rc1 so
>>        per-subsystem patches may be applied independently
>> 
>>   drivers/gpu/drm/qxl/Kconfig   |  1 +
>>   drivers/gpu/drm/tiny/bochs.c  | 17 +++++++++++++++++
>>   drivers/gpu/drm/tiny/cirrus.c |  2 ++
>
> There are more invocations in gma500. See[1]
>
> [1] 
> https://elixir.bootlin.com/linux/v6.3/source/drivers/gpu/drm/gma500/cdv_device.c#L30

GMA500 already has "depends on X86", so I don't think
any changes are needed there -- x86 is already highly dependent
on I/O ports for a number of reasons.

     Arnd
diff mbox series

Patch

diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig
index ca3f51c2a8fe..d0e0d440c8d9 100644
--- a/drivers/gpu/drm/qxl/Kconfig
+++ b/drivers/gpu/drm/qxl/Kconfig
@@ -2,6 +2,7 @@ 
 config DRM_QXL
 	tristate "QXL virtual GPU"
 	depends on DRM && PCI && MMU
+	depends on HAS_IOPORT
 	select DRM_KMS_HELPER
 	select DRM_TTM
 	select DRM_TTM_HELPER
diff --git a/drivers/gpu/drm/tiny/bochs.c b/drivers/gpu/drm/tiny/bochs.c
index d254679a136e..3710339407cc 100644
--- a/drivers/gpu/drm/tiny/bochs.c
+++ b/drivers/gpu/drm/tiny/bochs.c
@@ -2,6 +2,7 @@ 
 
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <asm/bug.h>
 
 #include <drm/drm_aperture.h>
 #include <drm/drm_atomic_helper.h>
@@ -105,7 +106,9 @@  static void bochs_vga_writeb(struct bochs_device *bochs, u16 ioport, u8 val)
 
 		writeb(val, bochs->mmio + offset);
 	} else {
+#ifdef CONFIG_HAS_IOPORT
 		outb(val, ioport);
+#endif
 	}
 }
 
@@ -119,7 +122,11 @@  static u8 bochs_vga_readb(struct bochs_device *bochs, u16 ioport)
 
 		return readb(bochs->mmio + offset);
 	} else {
+#ifdef CONFIG_HAS_IOPORT
 		return inb(ioport);
+#else
+		return 0xff;
+#endif
 	}
 }
 
@@ -132,8 +139,12 @@  static u16 bochs_dispi_read(struct bochs_device *bochs, u16 reg)
 
 		ret = readw(bochs->mmio + offset);
 	} else {
+#ifdef CONFIG_HAS_IOPORT
 		outw(reg, VBE_DISPI_IOPORT_INDEX);
 		ret = inw(VBE_DISPI_IOPORT_DATA);
+#else
+		ret = 0xffff;
+#endif
 	}
 	return ret;
 }
@@ -145,8 +156,10 @@  static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val)
 
 		writew(val, bochs->mmio + offset);
 	} else {
+#ifdef CONFIG_HAS_IOPORT
 		outw(reg, VBE_DISPI_IOPORT_INDEX);
 		outw(val, VBE_DISPI_IOPORT_DATA);
+#endif
 	}
 }
 
@@ -229,6 +242,10 @@  static int bochs_hw_init(struct drm_device *dev)
 			return -ENOMEM;
 		}
 	} else {
+		if (!IS_ENABLED(CONFIG_HAS_IOPORT)) {
+			DRM_ERROR("I/O ports are not supported\n");
+			return -EIO;
+		}
 		ioaddr = VBE_DISPI_IOPORT_INDEX;
 		iosize = 2;
 		if (!request_region(ioaddr, iosize, "bochs-drm")) {
diff --git a/drivers/gpu/drm/tiny/cirrus.c b/drivers/gpu/drm/tiny/cirrus.c
index 594bc472862f..c65fea049bc7 100644
--- a/drivers/gpu/drm/tiny/cirrus.c
+++ b/drivers/gpu/drm/tiny/cirrus.c
@@ -508,8 +508,10 @@  static void cirrus_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 
 	cirrus_mode_set(cirrus, &crtc_state->mode);
 
+#ifdef CONFIG_HAS_IOPORT
 	/* Unblank (needed on S3 resume, vgabios doesn't do it then) */
 	outb(VGA_AR_ENABLE_DISPLAY, VGA_ATT_W);
+#endif
 
 	drm_dev_exit(idx);
 }