diff mbox series

[1/2] dt-bindings: PCI: xilinx-xdma: Add YAML schemas for Xilinx XDMA PCIe Root Port Bridge

Message ID 20230417103226.334588-2-thippeswamy.havalige@amd.com
State New
Headers show
Series Add support for Xilinx XDMA Soft IP as Root Port. | expand

Commit Message

Havalige, Thippeswamy April 17, 2023, 10:32 a.m. UTC 
Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge
dt binding.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
---
 .../bindings/pci/xlnx,xdma-host.yaml          | 117 ++++++++++++++++++
 1 file changed, 117 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml

Comments

Rob Herring (Arm) April 17, 2023, 1:10 p.m. UTC | #1 
On Mon, 17 Apr 2023 16:02:25 +0530, Thippeswamy Havalige wrote:
> Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge
> dt binding.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
> ---
>  .../bindings/pci/xlnx,xdma-host.yaml          | 117 ++++++++++++++++++
>  1 file changed, 117 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: /example-0/soc/pcie@a0000000: failed to match any schema with compatible: ['xlnx,xdma-host-3.00']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230417103226.334588-2-thippeswamy.havalige@amd.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
new file mode 100644
index 000000000000..e3a1ef1a47d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml
@@ -0,0 +1,117 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,xdma-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx XDMA PL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,xdma-host-3.0
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received.
+      - description: msi0 interrupt asserted when an MSI is received.
+      - description: msi1 interrupt asserted when an MSI is received.
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: msi0
+      - const: msi1
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  interrupt-map:
+    maxItems: 4
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@a0000000 {
+            compatible = "xlnx,xdma-host-3.00";
+            reg = <0x0 0xa0000000 0x0 0x10000000>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "msi0", "msi1";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                            <0 0 0 2 &pcie_intc_0 1>,
+                            <0 0 0 3 &pcie_intc_0 2>,
+                            <0 0 0 4 &pcie_intc_0 3>;
+            ranges = <0x2000000 0x0 0xb0000000 0x0 0xb0000000 0x0 0x1000000>,
+                     <0x43000000 0x5 0x0 0x5 0x0 0x0 0x1000000>;
+            pcie_intc_0: interrupt-controller {
+                #address-cells = <2>;
+                #interrupt-cells = <1>;
+                interrupt-controller ;
+            };
+        };
+    };