From patchwork Sun Nov 13 19:12:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 1703310 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-pci-owner@vger.kernel.org; receiver=) Authentication-Results: legolas.ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=baikalelectronics.ru header.i=@baikalelectronics.ru header.a=rsa-sha256 header.s=post header.b=sAlwt95d; dkim-atps=neutral Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4N9MbC1l9Sz23n7 for ; Mon, 14 Nov 2022 06:15:19 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235613AbiKMTPL (ORCPT ); Sun, 13 Nov 2022 14:15:11 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46306 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235273AbiKMTO4 (ORCPT ); Sun, 13 Nov 2022 14:14:56 -0500 Received: from post.baikalelectronics.com (post.baikalelectronics.com [213.79.110.86]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id D75F62BE1; Sun, 13 Nov 2022 11:14:54 -0800 (PST) Received: from post.baikalelectronics.com (localhost.localdomain [127.0.0.1]) by post.baikalelectronics.com (Proxmox) with ESMTP id EFB35E0EB9; Sun, 13 Nov 2022 22:14:53 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= baikalelectronics.ru; h=cc:cc:content-transfer-encoding :content-type:content-type:date:from:from:in-reply-to:message-id :mime-version:references:reply-to:subject:subject:to:to; s=post; bh=gplzP3K8WfYz/8RwoGoHSBrv5CgJjWPVt9HNBNS4KRE=; b=sAlwt95deqw4 mqrh5r2D12SM8An4YfiSDVbEzwjqpWG6ezrWwyVBj9bFA5QT94Z2K3N3p2QczcWX +Nr825pp/Nq1Xe48/3gag8hHiRlo+EboTrZqWP1Kpgp1W/qM0di2tkEBCgAyWJHt FOyBSt4xDmQBeBRWEgMjTrBZqmzz9Lo= Received: from mail.baikal.int (mail.baikal.int [192.168.51.25]) by post.baikalelectronics.com (Proxmox) with ESMTP id DF203E0E6A; Sun, 13 Nov 2022 22:14:53 +0300 (MSK) Received: from localhost (192.168.168.10) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Sun, 13 Nov 2022 22:14:53 +0300 From: Serge Semin To: Rob Herring , Rob Herring , Krzysztof Kozlowski , Bjorn Helgaas , Lorenzo Pieralisi , Cai Huoqing , Robin Murphy , Jingoo Han , Gustavo Pimentel CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , =?utf-8?q?Krzys?= =?utf-8?q?ztof_Wilczy=C5=84ski?= , Frank Li , Manivannan Sadhasivam , caihuoqing , Vinod Koul , , , Subject: [PATCH v7 09/20] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties Date: Sun, 13 Nov 2022 22:12:50 +0300 Message-ID: <20221113191301.5526-10-Sergey.Semin@baikalelectronics.ru> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221113191301.5526-1-Sergey.Semin@baikalelectronics.ru> References: <20221113191301.5526-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-Originating-IP: [192.168.168.10] X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Currently the 'interrupts' and 'interrupt-names' properties are defined being too generic to really describe any actual IRQ interface. Moreover the DW PCIe End-point devices are left with no IRQ signals. All of that can be fixed by adding the IRQ-related properties to the common DW PCIe DT-schemas in accordance with the hardware reference manual. The DW PCIe common DT-schema will contain the generic properties definitions with just a number of entries per property, while the DW PCIe RP/EP-specific schemas will have the particular number of items and the generic resource names listed. Note since there are DW PCI-based vendor-specific DT-bindings with the custom names assigned to the same IRQ resources we have no much choice but to add them to the generic DT-schemas in order to have the schemas being applicable for such devices. These names are marked as vendor-specific and should be avoided being used in new bindings in favor of the generic names. Signed-off-by: Serge Semin Reviewed-by: Rob Herring --- Changelog v3: - This is a new patch unpinned from the next one: https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@baikalelectronics.ru/ by the Rob' request. (@Rob) Changelog v5: - Add platform-specific interrupt names, but mark them as deprecated. Changelog v6: - Move the common interrupt-names definitions to the RP/EP schemas. Thus drop the 'definitions' property. (@Rob) - Drop the 'deprecated' keywords from the vendor-specific names. (@Rob) Changelog v7: - Drop the dtschema tool 'lib.py' fix chunk from under the '---' pattern. (@Yoshihiro) --- .../bindings/pci/snps,dw-pcie-common.yaml | 19 ++++ .../bindings/pci/snps,dw-pcie-ep.yaml | 52 +++++++++++ .../devicetree/bindings/pci/snps,dw-pcie.yaml | 90 ++++++++++++++++++- 3 files changed, 158 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index e63c21783fc1..4646fb14e817 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -17,6 +17,25 @@ description: select: false properties: + interrupts: + description: + There are two main sub-blocks which are normally capable of + generating interrupts. It's System Information Interface and MSI + interface. While the former one has some common for the Host and + Endpoint controllers IRQ-signals, the later interface is obviously + Root Complex specific since it's responsible for the incoming MSI + messages signalling. The System Information IRQ signals are mainly + responsible for reporting the generic PCIe hierarchy and Root + Complex events like VPD IO request, general AER, PME, Hot-plug, link + bandwidth change, link equalization request, INTx asserted/deasserted + Message detection, embedded DMA Tx/Rx/Error. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + phys: description: There can be up to the number of possible lanes PHYs specified placed in diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml index 71dd19ae1060..7d3f8fc8b7b4 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -41,6 +41,55 @@ properties: items: enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl] + interrupts: + description: + There is no mandatory IRQ signals for the normal controller functioning, + but in addition to the native set the platforms may have a link- or + PM-related IRQs specified. + minItems: 1 + maxItems: 20 + + interrupt-names: + minItems: 1 + maxItems: 20 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + max-functions: maximum: 32 @@ -60,6 +109,9 @@ examples: <0xd0000000 0x2000000>; /* Configuration space */ reg-names = "dbi", "dbi2", "addr_space"; + interrupts = <23>, <24>; + interrupt-names = "dma0", "dma1"; + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 85861b71d9ff..fa1db57b2b97 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -42,9 +42,92 @@ properties: enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl, parf, cfg, link, ulreg, smu, mpu, apb, phy ] - interrupts: true - - interrupt-names: true + interrupts: + description: + DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt + signal is supposed to be specified for the host controller. + minItems: 1 + maxItems: 26 + + interrupt-names: + minItems: 1 + maxItems: 26 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + DSP AXI MSI Interrupt detected. It gets de-asserted when there is + no more MSI interrupt pending. The interrupt is relevant to the + iMSI-RX - Integrated MSI Receiver (AXI bridge). + const: msi + - description: + Legacy A/B/C/D interrupt signal. Basically it's triggered by + receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message + from the downstream device. + pattern: "^int(a|b|c|d)$" + - description: + Error condition detected and a flag is set in the Root Error Status + register of the AER capability. It's asserted when the RC + internally generated an error or an error message is received by + the RC. + const: aer + - description: + PME message is received by the port. That means having the PME + status bit set in the Root Status register (the event is + supposed to be unmasked in the Root Control register). + const: pme + - description: + Hot-plug event is detected. That is a bit has been set in the + Slot Status register and the corresponding event is enabled in + the Slot Control register. + const: hp + - description: + Link Autonomous Bandwidth Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_au + - description: + Bandwidth Management Status flag has been set in the Link + Status register (the event is supposed to be unmasked in the + Link Control register). + const: bw_mg + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + allOf: + - contains: + const: msi clocks: true @@ -70,6 +153,7 @@ examples: bus-range = <0x0 0xff>; interrupts = <25>, <24>; + interrupt-names = "msi", "hp"; #interrupt-cells = <1>; reset-gpios = <&port0 0 1>;