diff mbox series

[v2,7/7] arm64: dts: qcom: replace deprecated perst-gpio with perst-gpios

Message ID 20220422211002.2012070-8-dmitry.baryshkov@linaro.org
State New
Headers show
Series dt-bindings: YAMLify pci/qcom,pcie schema | expand

Commit Message

Dmitry Baryshkov April 22, 2022, 9:10 p.m. UTC
Replace deprecated perst-gpio properties with up-to-date perst-gpios
in the Qualcomm device trees.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts            | 6 +++---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts              | 4 ++--
 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi             | 4 ++--
 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi               | 2 +-
 arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi         | 2 +-
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi               | 2 +-
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts             | 4 ++--
 8 files changed, 14 insertions(+), 14 deletions(-)

Comments

Krzysztof Kozlowski April 23, 2022, 5:45 p.m. UTC | #1
On 22/04/2022 23:10, Dmitry Baryshkov wrote:
> Replace deprecated perst-gpio properties with up-to-date perst-gpios
> in the Qualcomm device trees.
> 

You also replaced wake-gpio in one case.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index f623db8451f1..9fb33850e46c 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -497,20 +497,20 @@  config {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 130 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 
 &pcie2 {
 	status = "okay";
-	perst-gpio = <&tlmm 114 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
 	vdda-supply = <&vreg_l28a_0p925>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index b5e1eaa367bf..2d5ee337054c 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -54,12 +54,12 @@  &blsp1_uart5 {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 0x1>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie_phy0 {
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 07e670829676..3c0ac747de0e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -44,12 +44,12 @@  &blsp1_uart5 {
 
 &pcie0 {
 	status = "ok";
-	perst-gpio = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie1 {
 	status = "ok";
-	perst-gpio = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 0x1>;
 };
 
 &pcie_phy0 {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 3bb50cecd62d..b90000223d69 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -195,8 +195,8 @@  &mmcc {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&pm8994_l28>;
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index a80c578484ba..b067b9f95189 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -99,7 +99,7 @@  pms405_s3: s3 {
 &pcie {
 	status = "okay";
 
-	perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&perst_state>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index dc17f2079695..461ba68fd939 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -362,7 +362,7 @@  &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
 
-	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&pp3300_ssd>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b89d896..8abf8077be11 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -240,7 +240,7 @@  &ipa {
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
 	vddpe-3v3-supply = <&nvme_3v3_regulator>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 28fe45c5d516..1aadd5504631 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -502,7 +502,7 @@  &mss_pil {
 
 &pcie0 {
 	status = "okay";
-	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
 
 	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
@@ -520,7 +520,7 @@  &pcie0_phy {
 
 &pcie1 {
 	status = "okay";
-	perst-gpio = <&tlmm 102 GPIO_ACTIVE_LOW>;
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;