| Message ID | 20211014183943.27717-2-hdegoede@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | x86/PCI: Ignore E820 reservations for bridge windows on newer systems | expand |
On Thu, Oct 14, 2021 at 08:39:42PM +0200, Hans de Goede wrote: > Some BIOS-es contain a bug where they add addresses which map to system > RAM in the PCI host bridge window returned by the ACPI _CRS method, see > commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address > space"). > > To work around this bug Linux excludes E820 reserved addresses when > allocating addresses from the PCI host bridge window since 2010. > > Recently (2020) some systems have shown-up with E820 reservations which > cover the entire _CRS returned PCI bridge memory window, causing all > attempts to assign memory to PCI BARs which have not been setup by the > BIOS to fail. For example here are the relevant dmesg bits from a > Lenovo IdeaPad 3 15IIL 81WE: > > [mem 0x000000004bc50000-0x00000000cfffffff] reserved > pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] > > The ACPI specifications appear to allow this new behavior: > > The relationship between E820 and ACPI _CRS is not really very clear. > ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: > > This range of addresses is in use or reserved by the system and is > not to be included in the allocatable memory pool of the operating > system's memory manager. > > and it may be used when: > > The address range is in use by a memory-mapped system device. > > Furthermore, sec 15.2 says: > > Address ranges defined for baseboard memory-mapped I/O devices, such > as APICs, are returned as reserved. > > A PCI host bridge qualifies as a baseboard memory-mapped I/O device, > and its apertures are in use and certainly should not be included in > the general allocatable pool, so the fact that some BIOS-es reports > the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. > > So it seems that the excluding of E820 reserved addresses is a mistake. > > Ideally Linux would fully stop excluding E820 reserved addresses, > but then the old systems this was added for will regress. > Instead keep the old behavior for old systems, while ignoring > the E820 reservations for any systems from now on. > > Old systems are defined here as BIOS year < 2018, this was chosen to > make sure that pci_use_e820 will not be set on the currently affected > systems, while at the same time also taking into account that the > systems for which the E820 checking was originally added may have > received BIOS updates for quite a while (esp. CVE related ones), > giving them a more recent BIOS year then 2010. > > Also add pci=no_e820 and pci=use_e820 options to allow overriding > the BIOS year heuristic. > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 > BugLink: https://bugs.launchpad.net/bugs/1878279 > BugLink: https://bugs.launchpad.net/bugs/1931715 > BugLink: https://bugs.launchpad.net/bugs/1932069 > BugLink: https://bugs.launchpad.net/bugs/1921649 > Cc: Benoit Grégoire <benoitg@coeus.ca> > Cc: Hui Wang <hui.wang@canonical.com> > Cc: stable@vger.kernel.org > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> I'm sorry we have to add more ugliness because of my mistake in 4dc2287c1805, but I don't see a better option. > --- > Changes in v5: > - Drop mention of Windows behavior from the commit msg, replace with a > reference to the specs > - Improve documentation in Documentation/admin-guide/kernel-parameters.txt > - Reword the big comment added, use "PCI host bridge window" in it and drop > all refences to Windows > > Changes in v4: > - Rewrap the big comment block to fit in 80 columns > - Add Rafael's Acked-by > - Add Cc: stable@vger.kernel.org > > Changes in v3: > - Commit msg tweaks (drop dmesg timestamps, typo fix) > - Use "defined(CONFIG_...)" instead of "defined CONFIG_..." > - Add Mika's Reviewed-by > > Changes in v2: > - Replace the per model DMI quirk approach with disabling E820 reservations > checking for all systems with a BIOS year >= 2018 > - Add documentation for the new kernel-parameters to > Documentation/admin-guide/kernel-parameters.txt > --- > Other patches trying to address the same issue: > https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@canonical.com > https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@linux.intel.com > V1 patch: > https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@redhat.com > --- > .../admin-guide/kernel-parameters.txt | 9 ++++++ > arch/x86/include/asm/pci_x86.h | 10 +++++++ > arch/x86/kernel/resource.c | 4 +++ > arch/x86/pci/acpi.c | 28 +++++++++++++++++++ > arch/x86/pci/common.c | 6 ++++ > 5 files changed, 57 insertions(+) > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt > index 43dc35fe5bc0..07f1615206d4 100644 > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -3949,6 +3949,15 @@ > please report a bug. > nocrs [X86] Ignore PCI host bridge windows from ACPI. > If you need to use this, please report a bug. > + use_e820 [X86] Use E820 reservations to exclude parts of > + PCI host bridge windows. This is a workaround > + for BIOS defects in host bridge _CRS methods. > + If you need to use this, please report a bug to > + <linux-pci@vger.kernel.org>. > + no_e820 [X86] Ignore E820 reservations for PCI host > + bridge windows. This is the default on modern > + hardware. If you need to use this, please report > + a bug to <linux-pci@vger.kernel.org>. > routeirq Do IRQ routing for all PCI devices. > This is normally done in pci_enable_device(), > so this option is a temporary workaround > diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h > index 490411dba438..0bb4e7dd0ffc 100644 > --- a/arch/x86/include/asm/pci_x86.h > +++ b/arch/x86/include/asm/pci_x86.h > @@ -39,6 +39,8 @@ do { \ > #define PCI_ROOT_NO_CRS 0x100000 > #define PCI_NOASSIGN_BARS 0x200000 > #define PCI_BIG_ROOT_WINDOW 0x400000 > +#define PCI_USE_E820 0x800000 > +#define PCI_NO_E820 0x1000000 > > extern unsigned int pci_probe; > extern unsigned long pirq_table_addr; > @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn); > > /* pci-irq.c */ > > +struct pci_dev; > + > struct irq_info { > u8 bus, devfn; /* Bus, device and function */ > struct { > @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) > # define x86_default_pci_init_irq NULL > # define x86_default_pci_fixup_irqs NULL > #endif > + > +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI) > +extern bool pci_use_e820; > +#else > +#define pci_use_e820 false > +#endif > diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c > index 9b9fb7882c20..e8dc9bc327bd 100644 > --- a/arch/x86/kernel/resource.c > +++ b/arch/x86/kernel/resource.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > #include <linux/ioport.h> > #include <asm/e820/api.h> > +#include <asm/pci_x86.h> > > static void resource_clip(struct resource *res, resource_size_t start, > resource_size_t end) > @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail) > int i; > struct e820_entry *entry; > > + if (!pci_use_e820) > + return; > + > for (i = 0; i < e820_table->nr_entries; i++) { > entry = &e820_table->entries[i]; > > diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c > index 948656069cdd..72d473054262 100644 > --- a/arch/x86/pci/acpi.c > +++ b/arch/x86/pci/acpi.c > @@ -21,6 +21,8 @@ struct pci_root_info { > > static bool pci_use_crs = true; > static bool pci_ignore_seg = false; > +/* Consumed in arch/x86/kernel/resource.c */ > +bool pci_use_e820 = false; > > static int __init set_use_crs(const struct dmi_system_id *id) > { > @@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void) > "if necessary, use \"pci=%s\" and report a bug\n", > pci_use_crs ? "Using" : "Ignoring", > pci_use_crs ? "nocrs" : "use_crs"); > + > + /* > + * Some BIOS-es contain a bug where they add addresses which map to > + * system RAM in the PCI host bridge window returned by the ACPI _CRS > + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when > + * allocating address space"). To avoid this Linux by default excludes > + * E820 reservations when allocating addresses since 2010. > + * In 2020 some systems have shown-up with E820 reservations which cover > + * the entire _CRS returned PCI host bridge window, causing all attempts > + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. > + * > + * Ideally Linux would fully stop using E820 reservations, but then > + * the old systems this was added for will regress. > + * Instead keep the old behavior for old systems, while ignoring the > + * E820 reservations for any systems from now on. > + */ > + if (year >= 0 && year < 2018) > + pci_use_e820 = true; > + > + if (pci_probe & PCI_NO_E820) > + pci_use_e820 = false; > + else if (pci_probe & PCI_USE_E820) > + pci_use_e820 = true; > + > + printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n", > + pci_use_e820 ? "Using" : "Ignoring"); > } > > #ifdef CONFIG_PCI_MMCONFIG > diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c > index 3507f456fcd0..091ec7e94fcb 100644 > --- a/arch/x86/pci/common.c > +++ b/arch/x86/pci/common.c > @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str) > } else if (!strcmp(str, "nocrs")) { > pci_probe |= PCI_ROOT_NO_CRS; > return NULL; > + } else if (!strcmp(str, "use_e820")) { > + pci_probe |= PCI_USE_E820; > + return NULL; > + } else if (!strcmp(str, "no_e820")) { > + pci_probe |= PCI_NO_E820; > + return NULL; > #ifdef CONFIG_PHYS_ADDR_T_64BIT > } else if (!strcmp(str, "big_root_window")) { > pci_probe |= PCI_BIG_ROOT_WINDOW; > -- > 2.31.1 >
Hi, On 10/15/21 10:03 PM, Bjorn Helgaas wrote: > On Thu, Oct 14, 2021 at 08:39:42PM +0200, Hans de Goede wrote: >> Some BIOS-es contain a bug where they add addresses which map to system >> RAM in the PCI host bridge window returned by the ACPI _CRS method, see >> commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address >> space"). >> >> To work around this bug Linux excludes E820 reserved addresses when >> allocating addresses from the PCI host bridge window since 2010. >> >> Recently (2020) some systems have shown-up with E820 reservations which >> cover the entire _CRS returned PCI bridge memory window, causing all >> attempts to assign memory to PCI BARs which have not been setup by the >> BIOS to fail. For example here are the relevant dmesg bits from a >> Lenovo IdeaPad 3 15IIL 81WE: >> >> [mem 0x000000004bc50000-0x00000000cfffffff] reserved >> pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] >> >> The ACPI specifications appear to allow this new behavior: >> >> The relationship between E820 and ACPI _CRS is not really very clear. >> ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: >> >> This range of addresses is in use or reserved by the system and is >> not to be included in the allocatable memory pool of the operating >> system's memory manager. >> >> and it may be used when: >> >> The address range is in use by a memory-mapped system device. >> >> Furthermore, sec 15.2 says: >> >> Address ranges defined for baseboard memory-mapped I/O devices, such >> as APICs, are returned as reserved. >> >> A PCI host bridge qualifies as a baseboard memory-mapped I/O device, >> and its apertures are in use and certainly should not be included in >> the general allocatable pool, so the fact that some BIOS-es reports >> the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. >> >> So it seems that the excluding of E820 reserved addresses is a mistake. >> >> Ideally Linux would fully stop excluding E820 reserved addresses, >> but then the old systems this was added for will regress. >> Instead keep the old behavior for old systems, while ignoring >> the E820 reservations for any systems from now on. >> >> Old systems are defined here as BIOS year < 2018, this was chosen to >> make sure that pci_use_e820 will not be set on the currently affected >> systems, while at the same time also taking into account that the >> systems for which the E820 checking was originally added may have >> received BIOS updates for quite a while (esp. CVE related ones), >> giving them a more recent BIOS year then 2010. >> >> Also add pci=no_e820 and pci=use_e820 options to allow overriding >> the BIOS year heuristic. >> >> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 >> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 >> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 >> BugLink: https://bugs.launchpad.net/bugs/1878279 >> BugLink: https://bugs.launchpad.net/bugs/1931715 >> BugLink: https://bugs.launchpad.net/bugs/1932069 >> BugLink: https://bugs.launchpad.net/bugs/1921649 >> Cc: Benoit Grégoire <benoitg@coeus.ca> >> Cc: Hui Wang <hui.wang@canonical.com> >> Cc: stable@vger.kernel.org >> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> >> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > Acked-by: Bjorn Helgaas <bhelgaas@google.com> Thank you. Regards, Hans > > I'm sorry we have to add more ugliness because of my mistake in > 4dc2287c1805, but I don't see a better option. > >> --- >> Changes in v5: >> - Drop mention of Windows behavior from the commit msg, replace with a >> reference to the specs >> - Improve documentation in Documentation/admin-guide/kernel-parameters.txt >> - Reword the big comment added, use "PCI host bridge window" in it and drop >> all refences to Windows >> >> Changes in v4: >> - Rewrap the big comment block to fit in 80 columns >> - Add Rafael's Acked-by >> - Add Cc: stable@vger.kernel.org >> >> Changes in v3: >> - Commit msg tweaks (drop dmesg timestamps, typo fix) >> - Use "defined(CONFIG_...)" instead of "defined CONFIG_..." >> - Add Mika's Reviewed-by >> >> Changes in v2: >> - Replace the per model DMI quirk approach with disabling E820 reservations >> checking for all systems with a BIOS year >= 2018 >> - Add documentation for the new kernel-parameters to >> Documentation/admin-guide/kernel-parameters.txt >> --- >> Other patches trying to address the same issue: >> https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@canonical.com >> https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@linux.intel.com >> V1 patch: >> https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@redhat.com >> --- >> .../admin-guide/kernel-parameters.txt | 9 ++++++ >> arch/x86/include/asm/pci_x86.h | 10 +++++++ >> arch/x86/kernel/resource.c | 4 +++ >> arch/x86/pci/acpi.c | 28 +++++++++++++++++++ >> arch/x86/pci/common.c | 6 ++++ >> 5 files changed, 57 insertions(+) >> >> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt >> index 43dc35fe5bc0..07f1615206d4 100644 >> --- a/Documentation/admin-guide/kernel-parameters.txt >> +++ b/Documentation/admin-guide/kernel-parameters.txt >> @@ -3949,6 +3949,15 @@ >> please report a bug. >> nocrs [X86] Ignore PCI host bridge windows from ACPI. >> If you need to use this, please report a bug. >> + use_e820 [X86] Use E820 reservations to exclude parts of >> + PCI host bridge windows. This is a workaround >> + for BIOS defects in host bridge _CRS methods. >> + If you need to use this, please report a bug to >> + <linux-pci@vger.kernel.org>. >> + no_e820 [X86] Ignore E820 reservations for PCI host >> + bridge windows. This is the default on modern >> + hardware. If you need to use this, please report >> + a bug to <linux-pci@vger.kernel.org>. >> routeirq Do IRQ routing for all PCI devices. >> This is normally done in pci_enable_device(), >> so this option is a temporary workaround >> diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h >> index 490411dba438..0bb4e7dd0ffc 100644 >> --- a/arch/x86/include/asm/pci_x86.h >> +++ b/arch/x86/include/asm/pci_x86.h >> @@ -39,6 +39,8 @@ do { \ >> #define PCI_ROOT_NO_CRS 0x100000 >> #define PCI_NOASSIGN_BARS 0x200000 >> #define PCI_BIG_ROOT_WINDOW 0x400000 >> +#define PCI_USE_E820 0x800000 >> +#define PCI_NO_E820 0x1000000 >> >> extern unsigned int pci_probe; >> extern unsigned long pirq_table_addr; >> @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn); >> >> /* pci-irq.c */ >> >> +struct pci_dev; >> + >> struct irq_info { >> u8 bus, devfn; /* Bus, device and function */ >> struct { >> @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) >> # define x86_default_pci_init_irq NULL >> # define x86_default_pci_fixup_irqs NULL >> #endif >> + >> +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI) >> +extern bool pci_use_e820; >> +#else >> +#define pci_use_e820 false >> +#endif >> diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c >> index 9b9fb7882c20..e8dc9bc327bd 100644 >> --- a/arch/x86/kernel/resource.c >> +++ b/arch/x86/kernel/resource.c >> @@ -1,6 +1,7 @@ >> // SPDX-License-Identifier: GPL-2.0 >> #include <linux/ioport.h> >> #include <asm/e820/api.h> >> +#include <asm/pci_x86.h> >> >> static void resource_clip(struct resource *res, resource_size_t start, >> resource_size_t end) >> @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail) >> int i; >> struct e820_entry *entry; >> >> + if (!pci_use_e820) >> + return; >> + >> for (i = 0; i < e820_table->nr_entries; i++) { >> entry = &e820_table->entries[i]; >> >> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c >> index 948656069cdd..72d473054262 100644 >> --- a/arch/x86/pci/acpi.c >> +++ b/arch/x86/pci/acpi.c >> @@ -21,6 +21,8 @@ struct pci_root_info { >> >> static bool pci_use_crs = true; >> static bool pci_ignore_seg = false; >> +/* Consumed in arch/x86/kernel/resource.c */ >> +bool pci_use_e820 = false; >> >> static int __init set_use_crs(const struct dmi_system_id *id) >> { >> @@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void) >> "if necessary, use \"pci=%s\" and report a bug\n", >> pci_use_crs ? "Using" : "Ignoring", >> pci_use_crs ? "nocrs" : "use_crs"); >> + >> + /* >> + * Some BIOS-es contain a bug where they add addresses which map to >> + * system RAM in the PCI host bridge window returned by the ACPI _CRS >> + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when >> + * allocating address space"). To avoid this Linux by default excludes >> + * E820 reservations when allocating addresses since 2010. >> + * In 2020 some systems have shown-up with E820 reservations which cover >> + * the entire _CRS returned PCI host bridge window, causing all attempts >> + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. >> + * >> + * Ideally Linux would fully stop using E820 reservations, but then >> + * the old systems this was added for will regress. >> + * Instead keep the old behavior for old systems, while ignoring the >> + * E820 reservations for any systems from now on. >> + */ >> + if (year >= 0 && year < 2018) >> + pci_use_e820 = true; >> + >> + if (pci_probe & PCI_NO_E820) >> + pci_use_e820 = false; >> + else if (pci_probe & PCI_USE_E820) >> + pci_use_e820 = true; >> + >> + printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n", >> + pci_use_e820 ? "Using" : "Ignoring"); >> } >> >> #ifdef CONFIG_PCI_MMCONFIG >> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c >> index 3507f456fcd0..091ec7e94fcb 100644 >> --- a/arch/x86/pci/common.c >> +++ b/arch/x86/pci/common.c >> @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str) >> } else if (!strcmp(str, "nocrs")) { >> pci_probe |= PCI_ROOT_NO_CRS; >> return NULL; >> + } else if (!strcmp(str, "use_e820")) { >> + pci_probe |= PCI_USE_E820; >> + return NULL; >> + } else if (!strcmp(str, "no_e820")) { >> + pci_probe |= PCI_NO_E820; >> + return NULL; >> #ifdef CONFIG_PHYS_ADDR_T_64BIT >> } else if (!strcmp(str, "big_root_window")) { >> pci_probe |= PCI_BIG_ROOT_WINDOW; >> -- >> 2.31.1 >> >
On Thu, Oct 14, 2021 at 08:39:42PM +0200, Hans de Goede wrote: > Some BIOS-es contain a bug where they add addresses which map to system > RAM in the PCI host bridge window returned by the ACPI _CRS method, see > commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address > space"). > > To work around this bug Linux excludes E820 reserved addresses when > allocating addresses from the PCI host bridge window since 2010. > > Recently (2020) some systems have shown-up with E820 reservations which > cover the entire _CRS returned PCI bridge memory window, causing all > attempts to assign memory to PCI BARs which have not been setup by the > BIOS to fail. For example here are the relevant dmesg bits from a > Lenovo IdeaPad 3 15IIL 81WE: > > [mem 0x000000004bc50000-0x00000000cfffffff] reserved > pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] > > The ACPI specifications appear to allow this new behavior: > > The relationship between E820 and ACPI _CRS is not really very clear. > ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: > > This range of addresses is in use or reserved by the system and is > not to be included in the allocatable memory pool of the operating > system's memory manager. > > and it may be used when: > > The address range is in use by a memory-mapped system device. > > Furthermore, sec 15.2 says: > > Address ranges defined for baseboard memory-mapped I/O devices, such > as APICs, are returned as reserved. > > A PCI host bridge qualifies as a baseboard memory-mapped I/O device, > and its apertures are in use and certainly should not be included in > the general allocatable pool, so the fact that some BIOS-es reports > the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. > > So it seems that the excluding of E820 reserved addresses is a mistake. > > Ideally Linux would fully stop excluding E820 reserved addresses, > but then the old systems this was added for will regress. > Instead keep the old behavior for old systems, while ignoring > the E820 reservations for any systems from now on. > > Old systems are defined here as BIOS year < 2018, this was chosen to > make sure that pci_use_e820 will not be set on the currently affected > systems, while at the same time also taking into account that the > systems for which the E820 checking was originally added may have > received BIOS updates for quite a while (esp. CVE related ones), > giving them a more recent BIOS year then 2010. > > Also add pci=no_e820 and pci=use_e820 options to allow overriding > the BIOS year heuristic. > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 > BugLink: https://bugs.launchpad.net/bugs/1878279 > BugLink: https://bugs.launchpad.net/bugs/1931715 > BugLink: https://bugs.launchpad.net/bugs/1932069 > BugLink: https://bugs.launchpad.net/bugs/1921649 > Cc: Benoit Grégoire <benoitg@coeus.ca> > Cc: Hui Wang <hui.wang@canonical.com> > Cc: stable@vger.kernel.org > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > Signed-off-by: Hans de Goede <hdegoede@redhat.com> I haven't seen anybody else eager to merge this, so I guess I'll stick my neck out here. I applied this to my for-linus branch for v5.15. > --- > Changes in v5: > - Drop mention of Windows behavior from the commit msg, replace with a > reference to the specs > - Improve documentation in Documentation/admin-guide/kernel-parameters.txt > - Reword the big comment added, use "PCI host bridge window" in it and drop > all refences to Windows > > Changes in v4: > - Rewrap the big comment block to fit in 80 columns > - Add Rafael's Acked-by > - Add Cc: stable@vger.kernel.org > > Changes in v3: > - Commit msg tweaks (drop dmesg timestamps, typo fix) > - Use "defined(CONFIG_...)" instead of "defined CONFIG_..." > - Add Mika's Reviewed-by > > Changes in v2: > - Replace the per model DMI quirk approach with disabling E820 reservations > checking for all systems with a BIOS year >= 2018 > - Add documentation for the new kernel-parameters to > Documentation/admin-guide/kernel-parameters.txt > --- > Other patches trying to address the same issue: > https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@canonical.com > https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@linux.intel.com > V1 patch: > https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@redhat.com > --- > .../admin-guide/kernel-parameters.txt | 9 ++++++ > arch/x86/include/asm/pci_x86.h | 10 +++++++ > arch/x86/kernel/resource.c | 4 +++ > arch/x86/pci/acpi.c | 28 +++++++++++++++++++ > arch/x86/pci/common.c | 6 ++++ > 5 files changed, 57 insertions(+) > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt > index 43dc35fe5bc0..07f1615206d4 100644 > --- a/Documentation/admin-guide/kernel-parameters.txt > +++ b/Documentation/admin-guide/kernel-parameters.txt > @@ -3949,6 +3949,15 @@ > please report a bug. > nocrs [X86] Ignore PCI host bridge windows from ACPI. > If you need to use this, please report a bug. > + use_e820 [X86] Use E820 reservations to exclude parts of > + PCI host bridge windows. This is a workaround > + for BIOS defects in host bridge _CRS methods. > + If you need to use this, please report a bug to > + <linux-pci@vger.kernel.org>. > + no_e820 [X86] Ignore E820 reservations for PCI host > + bridge windows. This is the default on modern > + hardware. If you need to use this, please report > + a bug to <linux-pci@vger.kernel.org>. > routeirq Do IRQ routing for all PCI devices. > This is normally done in pci_enable_device(), > so this option is a temporary workaround > diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h > index 490411dba438..0bb4e7dd0ffc 100644 > --- a/arch/x86/include/asm/pci_x86.h > +++ b/arch/x86/include/asm/pci_x86.h > @@ -39,6 +39,8 @@ do { \ > #define PCI_ROOT_NO_CRS 0x100000 > #define PCI_NOASSIGN_BARS 0x200000 > #define PCI_BIG_ROOT_WINDOW 0x400000 > +#define PCI_USE_E820 0x800000 > +#define PCI_NO_E820 0x1000000 > > extern unsigned int pci_probe; > extern unsigned long pirq_table_addr; > @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn); > > /* pci-irq.c */ > > +struct pci_dev; > + > struct irq_info { > u8 bus, devfn; /* Bus, device and function */ > struct { > @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) > # define x86_default_pci_init_irq NULL > # define x86_default_pci_fixup_irqs NULL > #endif > + > +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI) > +extern bool pci_use_e820; > +#else > +#define pci_use_e820 false > +#endif > diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c > index 9b9fb7882c20..e8dc9bc327bd 100644 > --- a/arch/x86/kernel/resource.c > +++ b/arch/x86/kernel/resource.c > @@ -1,6 +1,7 @@ > // SPDX-License-Identifier: GPL-2.0 > #include <linux/ioport.h> > #include <asm/e820/api.h> > +#include <asm/pci_x86.h> > > static void resource_clip(struct resource *res, resource_size_t start, > resource_size_t end) > @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail) > int i; > struct e820_entry *entry; > > + if (!pci_use_e820) > + return; > + > for (i = 0; i < e820_table->nr_entries; i++) { > entry = &e820_table->entries[i]; > > diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c > index 948656069cdd..72d473054262 100644 > --- a/arch/x86/pci/acpi.c > +++ b/arch/x86/pci/acpi.c > @@ -21,6 +21,8 @@ struct pci_root_info { > > static bool pci_use_crs = true; > static bool pci_ignore_seg = false; > +/* Consumed in arch/x86/kernel/resource.c */ > +bool pci_use_e820 = false; > > static int __init set_use_crs(const struct dmi_system_id *id) > { > @@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void) > "if necessary, use \"pci=%s\" and report a bug\n", > pci_use_crs ? "Using" : "Ignoring", > pci_use_crs ? "nocrs" : "use_crs"); > + > + /* > + * Some BIOS-es contain a bug where they add addresses which map to > + * system RAM in the PCI host bridge window returned by the ACPI _CRS > + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when > + * allocating address space"). To avoid this Linux by default excludes > + * E820 reservations when allocating addresses since 2010. > + * In 2020 some systems have shown-up with E820 reservations which cover > + * the entire _CRS returned PCI host bridge window, causing all attempts > + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. > + * > + * Ideally Linux would fully stop using E820 reservations, but then > + * the old systems this was added for will regress. > + * Instead keep the old behavior for old systems, while ignoring the > + * E820 reservations for any systems from now on. > + */ > + if (year >= 0 && year < 2018) > + pci_use_e820 = true; > + > + if (pci_probe & PCI_NO_E820) > + pci_use_e820 = false; > + else if (pci_probe & PCI_USE_E820) > + pci_use_e820 = true; > + > + printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n", > + pci_use_e820 ? "Using" : "Ignoring"); > } > > #ifdef CONFIG_PCI_MMCONFIG > diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c > index 3507f456fcd0..091ec7e94fcb 100644 > --- a/arch/x86/pci/common.c > +++ b/arch/x86/pci/common.c > @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str) > } else if (!strcmp(str, "nocrs")) { > pci_probe |= PCI_ROOT_NO_CRS; > return NULL; > + } else if (!strcmp(str, "use_e820")) { > + pci_probe |= PCI_USE_E820; > + return NULL; > + } else if (!strcmp(str, "no_e820")) { > + pci_probe |= PCI_NO_E820; > + return NULL; > #ifdef CONFIG_PHYS_ADDR_T_64BIT > } else if (!strcmp(str, "big_root_window")) { > pci_probe |= PCI_BIG_ROOT_WINDOW; > -- > 2.31.1 >
On Tue, Oct 19, 2021 at 04:52:42PM -0500, Bjorn Helgaas wrote: > On Thu, Oct 14, 2021 at 08:39:42PM +0200, Hans de Goede wrote: > > Some BIOS-es contain a bug where they add addresses which map to system > > RAM in the PCI host bridge window returned by the ACPI _CRS method, see > > commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address > > space"). > > > > To work around this bug Linux excludes E820 reserved addresses when > > allocating addresses from the PCI host bridge window since 2010. > > > > Recently (2020) some systems have shown-up with E820 reservations which > > cover the entire _CRS returned PCI bridge memory window, causing all > > attempts to assign memory to PCI BARs which have not been setup by the > > BIOS to fail. For example here are the relevant dmesg bits from a > > Lenovo IdeaPad 3 15IIL 81WE: > > > > [mem 0x000000004bc50000-0x00000000cfffffff] reserved > > pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] > > > > The ACPI specifications appear to allow this new behavior: > > > > The relationship between E820 and ACPI _CRS is not really very clear. > > ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: > > > > This range of addresses is in use or reserved by the system and is > > not to be included in the allocatable memory pool of the operating > > system's memory manager. > > > > and it may be used when: > > > > The address range is in use by a memory-mapped system device. > > > > Furthermore, sec 15.2 says: > > > > Address ranges defined for baseboard memory-mapped I/O devices, such > > as APICs, are returned as reserved. > > > > A PCI host bridge qualifies as a baseboard memory-mapped I/O device, > > and its apertures are in use and certainly should not be included in > > the general allocatable pool, so the fact that some BIOS-es reports > > the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. > > > > So it seems that the excluding of E820 reserved addresses is a mistake. > > > > Ideally Linux would fully stop excluding E820 reserved addresses, > > but then the old systems this was added for will regress. > > Instead keep the old behavior for old systems, while ignoring > > the E820 reservations for any systems from now on. > > > > Old systems are defined here as BIOS year < 2018, this was chosen to > > make sure that pci_use_e820 will not be set on the currently affected > > systems, while at the same time also taking into account that the > > systems for which the E820 checking was originally added may have > > received BIOS updates for quite a while (esp. CVE related ones), > > giving them a more recent BIOS year then 2010. > > > > Also add pci=no_e820 and pci=use_e820 options to allow overriding > > the BIOS year heuristic. > > > > BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 > > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 > > BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 > > BugLink: https://bugs.launchpad.net/bugs/1878279 > > BugLink: https://bugs.launchpad.net/bugs/1931715 > > BugLink: https://bugs.launchpad.net/bugs/1932069 > > BugLink: https://bugs.launchpad.net/bugs/1921649 > > Cc: Benoit Grégoire <benoitg@coeus.ca> > > Cc: Hui Wang <hui.wang@canonical.com> > > Cc: stable@vger.kernel.org > > Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> > > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > I haven't seen anybody else eager to merge this, so I guess I'll stick > my neck out here. > > I applied this to my for-linus branch for v5.15. (I only applied patch 1/2, to fix the PCI BAR assignments. The 2/2 patch to convert printk to pr_info might be nice, but definitely not -rc7 material. I'm hesitant enough about 1/2.)
<note this is a resend to see if some bounces which I was getting from vger are resolved, please ignore> Hi, On 10/19/21 23:52, Bjorn Helgaas wrote: > On Thu, Oct 14, 2021 at 08:39:42PM +0200, Hans de Goede wrote: >> Some BIOS-es contain a bug where they add addresses which map to system >> RAM in the PCI host bridge window returned by the ACPI _CRS method, see >> commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address >> space"). >> >> To work around this bug Linux excludes E820 reserved addresses when >> allocating addresses from the PCI host bridge window since 2010. >> >> Recently (2020) some systems have shown-up with E820 reservations which >> cover the entire _CRS returned PCI bridge memory window, causing all >> attempts to assign memory to PCI BARs which have not been setup by the >> BIOS to fail. For example here are the relevant dmesg bits from a >> Lenovo IdeaPad 3 15IIL 81WE: >> >> [mem 0x000000004bc50000-0x00000000cfffffff] reserved >> pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] >> >> The ACPI specifications appear to allow this new behavior: >> >> The relationship between E820 and ACPI _CRS is not really very clear. >> ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: >> >> This range of addresses is in use or reserved by the system and is >> not to be included in the allocatable memory pool of the operating >> system's memory manager. >> >> and it may be used when: >> >> The address range is in use by a memory-mapped system device. >> >> Furthermore, sec 15.2 says: >> >> Address ranges defined for baseboard memory-mapped I/O devices, such >> as APICs, are returned as reserved. >> >> A PCI host bridge qualifies as a baseboard memory-mapped I/O device, >> and its apertures are in use and certainly should not be included in >> the general allocatable pool, so the fact that some BIOS-es reports >> the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. >> >> So it seems that the excluding of E820 reserved addresses is a mistake. >> >> Ideally Linux would fully stop excluding E820 reserved addresses, >> but then the old systems this was added for will regress. >> Instead keep the old behavior for old systems, while ignoring >> the E820 reservations for any systems from now on. >> >> Old systems are defined here as BIOS year < 2018, this was chosen to >> make sure that pci_use_e820 will not be set on the currently affected >> systems, while at the same time also taking into account that the >> systems for which the E820 checking was originally added may have >> received BIOS updates for quite a while (esp. CVE related ones), >> giving them a more recent BIOS year then 2010. >> >> Also add pci=no_e820 and pci=use_e820 options to allow overriding >> the BIOS year heuristic. >> >> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 >> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 >> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 >> BugLink: https://bugs.launchpad.net/bugs/1878279 >> BugLink: https://bugs.launchpad.net/bugs/1931715 >> BugLink: https://bugs.launchpad.net/bugs/1932069 >> BugLink: https://bugs.launchpad.net/bugs/1921649 >> Cc: Benoit Grégoire <benoitg@coeus.ca> >> Cc: Hui Wang <hui.wang@canonical.com> >> Cc: stable@vger.kernel.org >> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> >> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com> > > I haven't seen anybody else eager to merge this, so I guess I'll stick > my neck out here. > > I applied this to my for-linus branch for v5.15. Thank you, and sorry about the build-errors which the lkp kernel-test-robot found. I've just send out a patch which fixes these build-errors (verified with both .config-s from the lkp reports). Feel free to squash this into the original patch (or keep them separate, whatever works for you). Regards, Hans >> --- >> Changes in v5: >> - Drop mention of Windows behavior from the commit msg, replace with a >> reference to the specs >> - Improve documentation in Documentation/admin-guide/kernel-parameters.txt >> - Reword the big comment added, use "PCI host bridge window" in it and drop >> all refences to Windows >> >> Changes in v4: >> - Rewrap the big comment block to fit in 80 columns >> - Add Rafael's Acked-by >> - Add Cc: stable@vger.kernel.org >> >> Changes in v3: >> - Commit msg tweaks (drop dmesg timestamps, typo fix) >> - Use "defined(CONFIG_...)" instead of "defined CONFIG_..." >> - Add Mika's Reviewed-by >> >> Changes in v2: >> - Replace the per model DMI quirk approach with disabling E820 reservations >> checking for all systems with a BIOS year >= 2018 >> - Add documentation for the new kernel-parameters to >> Documentation/admin-guide/kernel-parameters.txt >> --- >> Other patches trying to address the same issue: >> https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@canonical.com >> https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@linux.intel.com >> V1 patch: >> https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@redhat.com >> --- >> .../admin-guide/kernel-parameters.txt | 9 ++++++ >> arch/x86/include/asm/pci_x86.h | 10 +++++++ >> arch/x86/kernel/resource.c | 4 +++ >> arch/x86/pci/acpi.c | 28 +++++++++++++++++++ >> arch/x86/pci/common.c | 6 ++++ >> 5 files changed, 57 insertions(+) >> >> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt >> index 43dc35fe5bc0..07f1615206d4 100644 >> --- a/Documentation/admin-guide/kernel-parameters.txt >> +++ b/Documentation/admin-guide/kernel-parameters.txt >> @@ -3949,6 +3949,15 @@ >> please report a bug. >> nocrs [X86] Ignore PCI host bridge windows from ACPI. >> If you need to use this, please report a bug. >> + use_e820 [X86] Use E820 reservations to exclude parts of >> + PCI host bridge windows. This is a workaround >> + for BIOS defects in host bridge _CRS methods. >> + If you need to use this, please report a bug to >> + <linux-pci@vger.kernel.org>. >> + no_e820 [X86] Ignore E820 reservations for PCI host >> + bridge windows. This is the default on modern >> + hardware. If you need to use this, please report >> + a bug to <linux-pci@vger.kernel.org>. >> routeirq Do IRQ routing for all PCI devices. >> This is normally done in pci_enable_device(), >> so this option is a temporary workaround >> diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h >> index 490411dba438..0bb4e7dd0ffc 100644 >> --- a/arch/x86/include/asm/pci_x86.h >> +++ b/arch/x86/include/asm/pci_x86.h >> @@ -39,6 +39,8 @@ do { \ >> #define PCI_ROOT_NO_CRS 0x100000 >> #define PCI_NOASSIGN_BARS 0x200000 >> #define PCI_BIG_ROOT_WINDOW 0x400000 >> +#define PCI_USE_E820 0x800000 >> +#define PCI_NO_E820 0x1000000 >> >> extern unsigned int pci_probe; >> extern unsigned long pirq_table_addr; >> @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn); >> >> /* pci-irq.c */ >> >> +struct pci_dev; >> + >> struct irq_info { >> u8 bus, devfn; /* Bus, device and function */ >> struct { >> @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) >> # define x86_default_pci_init_irq NULL >> # define x86_default_pci_fixup_irqs NULL >> #endif >> + >> +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI) >> +extern bool pci_use_e820; >> +#else >> +#define pci_use_e820 false >> +#endif >> diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c >> index 9b9fb7882c20..e8dc9bc327bd 100644 >> --- a/arch/x86/kernel/resource.c >> +++ b/arch/x86/kernel/resource.c >> @@ -1,6 +1,7 @@ >> // SPDX-License-Identifier: GPL-2.0 >> #include <linux/ioport.h> >> #include <asm/e820/api.h> >> +#include <asm/pci_x86.h> >> >> static void resource_clip(struct resource *res, resource_size_t start, >> resource_size_t end) >> @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail) >> int i; >> struct e820_entry *entry; >> >> + if (!pci_use_e820) >> + return; >> + >> for (i = 0; i < e820_table->nr_entries; i++) { >> entry = &e820_table->entries[i]; >> >> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c >> index 948656069cdd..72d473054262 100644 >> --- a/arch/x86/pci/acpi.c >> +++ b/arch/x86/pci/acpi.c >> @@ -21,6 +21,8 @@ struct pci_root_info { >> >> static bool pci_use_crs = true; >> static bool pci_ignore_seg = false; >> +/* Consumed in arch/x86/kernel/resource.c */ >> +bool pci_use_e820 = false; >> >> static int __init set_use_crs(const struct dmi_system_id *id) >> { >> @@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void) >> "if necessary, use \"pci=%s\" and report a bug\n", >> pci_use_crs ? "Using" : "Ignoring", >> pci_use_crs ? "nocrs" : "use_crs"); >> + >> + /* >> + * Some BIOS-es contain a bug where they add addresses which map to >> + * system RAM in the PCI host bridge window returned by the ACPI _CRS >> + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when >> + * allocating address space"). To avoid this Linux by default excludes >> + * E820 reservations when allocating addresses since 2010. >> + * In 2020 some systems have shown-up with E820 reservations which cover >> + * the entire _CRS returned PCI host bridge window, causing all attempts >> + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. >> + * >> + * Ideally Linux would fully stop using E820 reservations, but then >> + * the old systems this was added for will regress. >> + * Instead keep the old behavior for old systems, while ignoring the >> + * E820 reservations for any systems from now on. >> + */ >> + if (year >= 0 && year < 2018) >> + pci_use_e820 = true; >> + >> + if (pci_probe & PCI_NO_E820) >> + pci_use_e820 = false; >> + else if (pci_probe & PCI_USE_E820) >> + pci_use_e820 = true; >> + >> + printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n", >> + pci_use_e820 ? "Using" : "Ignoring"); >> } >> >> #ifdef CONFIG_PCI_MMCONFIG >> diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c >> index 3507f456fcd0..091ec7e94fcb 100644 >> --- a/arch/x86/pci/common.c >> +++ b/arch/x86/pci/common.c >> @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str) >> } else if (!strcmp(str, "nocrs")) { >> pci_probe |= PCI_ROOT_NO_CRS; >> return NULL; >> + } else if (!strcmp(str, "use_e820")) { >> + pci_probe |= PCI_USE_E820; >> + return NULL; >> + } else if (!strcmp(str, "no_e820")) { >> + pci_probe |= PCI_NO_E820; >> + return NULL; >> #ifdef CONFIG_PHYS_ADDR_T_64BIT >> } else if (!strcmp(str, "big_root_window")) { >> pci_probe |= PCI_BIG_ROOT_WINDOW; >> -- >> 2.31.1 >> >
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 43dc35fe5bc0..07f1615206d4 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3949,6 +3949,15 @@ please report a bug. nocrs [X86] Ignore PCI host bridge windows from ACPI. If you need to use this, please report a bug. + use_e820 [X86] Use E820 reservations to exclude parts of + PCI host bridge windows. This is a workaround + for BIOS defects in host bridge _CRS methods. + If you need to use this, please report a bug to + <linux-pci@vger.kernel.org>. + no_e820 [X86] Ignore E820 reservations for PCI host + bridge windows. This is the default on modern + hardware. If you need to use this, please report + a bug to <linux-pci@vger.kernel.org>. routeirq Do IRQ routing for all PCI devices. This is normally done in pci_enable_device(), so this option is a temporary workaround diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index 490411dba438..0bb4e7dd0ffc 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -39,6 +39,8 @@ do { \ #define PCI_ROOT_NO_CRS 0x100000 #define PCI_NOASSIGN_BARS 0x200000 #define PCI_BIG_ROOT_WINDOW 0x400000 +#define PCI_USE_E820 0x800000 +#define PCI_NO_E820 0x1000000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; @@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn); /* pci-irq.c */ +struct pci_dev; + struct irq_info { u8 bus, devfn; /* Bus, device and function */ struct { @@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) # define x86_default_pci_init_irq NULL # define x86_default_pci_fixup_irqs NULL #endif + +#if defined(CONFIG_PCI) && defined(CONFIG_ACPI) +extern bool pci_use_e820; +#else +#define pci_use_e820 false +#endif diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c index 9b9fb7882c20..e8dc9bc327bd 100644 --- a/arch/x86/kernel/resource.c +++ b/arch/x86/kernel/resource.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/ioport.h> #include <asm/e820/api.h> +#include <asm/pci_x86.h> static void resource_clip(struct resource *res, resource_size_t start, resource_size_t end) @@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail) int i; struct e820_entry *entry; + if (!pci_use_e820) + return; + for (i = 0; i < e820_table->nr_entries; i++) { entry = &e820_table->entries[i]; diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 948656069cdd..72d473054262 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -21,6 +21,8 @@ struct pci_root_info { static bool pci_use_crs = true; static bool pci_ignore_seg = false; +/* Consumed in arch/x86/kernel/resource.c */ +bool pci_use_e820 = false; static int __init set_use_crs(const struct dmi_system_id *id) { @@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void) "if necessary, use \"pci=%s\" and report a bug\n", pci_use_crs ? "Using" : "Ignoring", pci_use_crs ? "nocrs" : "use_crs"); + + /* + * Some BIOS-es contain a bug where they add addresses which map to + * system RAM in the PCI host bridge window returned by the ACPI _CRS + * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when + * allocating address space"). To avoid this Linux by default excludes + * E820 reservations when allocating addresses since 2010. + * In 2020 some systems have shown-up with E820 reservations which cover + * the entire _CRS returned PCI host bridge window, causing all attempts + * to assign memory to PCI BARs to fail if Linux uses E820 reservations. + * + * Ideally Linux would fully stop using E820 reservations, but then + * the old systems this was added for will regress. + * Instead keep the old behavior for old systems, while ignoring the + * E820 reservations for any systems from now on. + */ + if (year >= 0 && year < 2018) + pci_use_e820 = true; + + if (pci_probe & PCI_NO_E820) + pci_use_e820 = false; + else if (pci_probe & PCI_USE_E820) + pci_use_e820 = true; + + printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n", + pci_use_e820 ? "Using" : "Ignoring"); } #ifdef CONFIG_PCI_MMCONFIG diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 3507f456fcd0..091ec7e94fcb 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str) } else if (!strcmp(str, "nocrs")) { pci_probe |= PCI_ROOT_NO_CRS; return NULL; + } else if (!strcmp(str, "use_e820")) { + pci_probe |= PCI_USE_E820; + return NULL; + } else if (!strcmp(str, "no_e820")) { + pci_probe |= PCI_NO_E820; + return NULL; #ifdef CONFIG_PHYS_ADDR_T_64BIT } else if (!strcmp(str, "big_root_window")) { pci_probe |= PCI_BIG_ROOT_WINDOW;
Some BIOS-es contain a bug where they add addresses which map to system RAM in the PCI host bridge window returned by the ACPI _CRS method, see commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address space"). To work around this bug Linux excludes E820 reserved addresses when allocating addresses from the PCI host bridge window since 2010. Recently (2020) some systems have shown-up with E820 reservations which cover the entire _CRS returned PCI bridge memory window, causing all attempts to assign memory to PCI BARs which have not been setup by the BIOS to fail. For example here are the relevant dmesg bits from a Lenovo IdeaPad 3 15IIL 81WE: [mem 0x000000004bc50000-0x00000000cfffffff] reserved pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window] The ACPI specifications appear to allow this new behavior: The relationship between E820 and ACPI _CRS is not really very clear. ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means: This range of addresses is in use or reserved by the system and is not to be included in the allocatable memory pool of the operating system's memory manager. and it may be used when: The address range is in use by a memory-mapped system device. Furthermore, sec 15.2 says: Address ranges defined for baseboard memory-mapped I/O devices, such as APICs, are returned as reserved. A PCI host bridge qualifies as a baseboard memory-mapped I/O device, and its apertures are in use and certainly should not be included in the general allocatable pool, so the fact that some BIOS-es reports the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug. So it seems that the excluding of E820 reserved addresses is a mistake. Ideally Linux would fully stop excluding E820 reserved addresses, but then the old systems this was added for will regress. Instead keep the old behavior for old systems, while ignoring the E820 reservations for any systems from now on. Old systems are defined here as BIOS year < 2018, this was chosen to make sure that pci_use_e820 will not be set on the currently affected systems, while at the same time also taking into account that the systems for which the E820 checking was originally added may have received BIOS updates for quite a while (esp. CVE related ones), giving them a more recent BIOS year then 2010. Also add pci=no_e820 and pci=use_e820 options to allow overriding the BIOS year heuristic. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793 BugLink: https://bugs.launchpad.net/bugs/1878279 BugLink: https://bugs.launchpad.net/bugs/1931715 BugLink: https://bugs.launchpad.net/bugs/1932069 BugLink: https://bugs.launchpad.net/bugs/1921649 Cc: Benoit Grégoire <benoitg@coeus.ca> Cc: Hui Wang <hui.wang@canonical.com> Cc: stable@vger.kernel.org Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v5: - Drop mention of Windows behavior from the commit msg, replace with a reference to the specs - Improve documentation in Documentation/admin-guide/kernel-parameters.txt - Reword the big comment added, use "PCI host bridge window" in it and drop all refences to Windows Changes in v4: - Rewrap the big comment block to fit in 80 columns - Add Rafael's Acked-by - Add Cc: stable@vger.kernel.org Changes in v3: - Commit msg tweaks (drop dmesg timestamps, typo fix) - Use "defined(CONFIG_...)" instead of "defined CONFIG_..." - Add Mika's Reviewed-by Changes in v2: - Replace the per model DMI quirk approach with disabling E820 reservations checking for all systems with a BIOS year >= 2018 - Add documentation for the new kernel-parameters to Documentation/admin-guide/kernel-parameters.txt --- Other patches trying to address the same issue: https://lore.kernel.org/r/20210624095324.34906-1-hui.wang@canonical.com https://lore.kernel.org/r/20200617164734.84845-1-mika.westerberg@linux.intel.com V1 patch: https://lore.kernel.org/r/20211005150956.303707-1-hdegoede@redhat.com --- .../admin-guide/kernel-parameters.txt | 9 ++++++ arch/x86/include/asm/pci_x86.h | 10 +++++++ arch/x86/kernel/resource.c | 4 +++ arch/x86/pci/acpi.c | 28 +++++++++++++++++++ arch/x86/pci/common.c | 6 ++++ 5 files changed, 57 insertions(+)