| Message ID | 20210630024934.18903-2-jianjun.wang@mediatek.com |
|---|---|
| State | New |
| Headers | show |
| Series | PCI: mediatek-gen3: Add support for disable dvfsrc | expand |
Reviewed-by: Qizhong Cheng <qizhong.cheng@mediatek.com> Tested-by: Qizhong Cheng <qizhong.cheng@mediatek.com> On Wed, 2021-06-30 at 10:49 +0800, Jianjun Wang wrote: > Add property to disable dvfsrc voltage request, if this property > is presented, we assume that the requested voltage is always > higher enough to keep the PCIe controller active. > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > --- > .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > index e7b1f9892da4..3e26c032cea9 100644 > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > @@ -96,6 +96,12 @@ properties: > phys: > maxItems: 1 > > + disable-dvfsrc-vlt-req: > + description: Disable dvfsrc voltage request, if this property is presented, > + we assume that the requested voltage is always higher enough to keep > + the PCIe controller active. > + type: boolean > + > '#interrupt-cells': > const: 1 > > @@ -166,6 +172,8 @@ examples: > <&infracfg_rst 3>; > reset-names = "phy", "mac"; > > + disable-dvfsrc-vlt-req; > + > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 0x7>; > interrupt-map = <0 0 0 1 &pcie_intc 0>,
Hi, Just gentle ping for this patch set, please kindly let me know your comments about this patch set. Thanks. On Wed, 2021-06-30 at 11:40 +0800, Qizhong Cheng wrote: > Reviewed-by: Qizhong Cheng <qizhong.cheng@mediatek.com> > Tested-by: Qizhong Cheng <qizhong.cheng@mediatek.com> > > On Wed, 2021-06-30 at 10:49 +0800, Jianjun Wang wrote: > > Add property to disable dvfsrc voltage request, if this property > > is presented, we assume that the requested voltage is always > > higher enough to keep the PCIe controller active. > > > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > > --- > > .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > index e7b1f9892da4..3e26c032cea9 100644 > > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > @@ -96,6 +96,12 @@ properties: > > phys: > > maxItems: 1 > > > > + disable-dvfsrc-vlt-req: > > + description: Disable dvfsrc voltage request, if this property is presented, > > + we assume that the requested voltage is always higher enough to keep > > + the PCIe controller active. > > + type: boolean > > + > > '#interrupt-cells': > > const: 1 > > > > @@ -166,6 +172,8 @@ examples: > > <&infracfg_rst 3>; > > reset-names = "phy", "mac"; > > > > + disable-dvfsrc-vlt-req; > > + > > #interrupt-cells = <1>; > > interrupt-map-mask = <0 0 0 0x7>; > > interrupt-map = <0 0 0 1 &pcie_intc 0>, > >
On Wed, Jun 30, 2021 at 10:49:33AM +0800, Jianjun Wang wrote: > Add property to disable dvfsrc voltage request, if this property > is presented, we assume that the requested voltage is always > higher enough to keep the PCIe controller active. > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > --- > .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > index e7b1f9892da4..3e26c032cea9 100644 > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > @@ -96,6 +96,12 @@ properties: > phys: > maxItems: 1 > > + disable-dvfsrc-vlt-req: > + description: Disable dvfsrc voltage request, if this property is presented, > + we assume that the requested voltage is always higher enough to keep > + the PCIe controller active. > + type: boolean What determines setting this property? Can it be implied by the compatible (which should be SoC specific). Is this property specific to PCIe controller? Wouldn't the request be harmless to make the voltage request even if not needed? I think this probably should be addressed in a common way as part of other QoS, devfreq, etc. requirements for devices. Rob
On Fri, 2021-07-16 at 11:33 -0600, Rob Herring wrote: > On Wed, Jun 30, 2021 at 10:49:33AM +0800, Jianjun Wang wrote: > > Add property to disable dvfsrc voltage request, if this property > > is presented, we assume that the requested voltage is always > > higher enough to keep the PCIe controller active. > > > > Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> > > --- > > .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 8 > > ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie- > > gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie- > > gen3.yaml > > index e7b1f9892da4..3e26c032cea9 100644 > > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml > > @@ -96,6 +96,12 @@ properties: > > phys: > > maxItems: 1 > > > > + disable-dvfsrc-vlt-req: > > + description: Disable dvfsrc voltage request, if this property > > is presented, > > + we assume that the requested voltage is always higher enough > > to keep > > + the PCIe controller active. > > + type: boolean > What determines setting this property? Can it be implied by the > compatible (which should be SoC specific). > > Is this property specific to PCIe controller? > > Wouldn't the request be harmless to make the voltage request even if > not > needed? > > I think this probably should be addressed in a common way as part of > other QoS, devfreq, etc. requirements for devices. > > Rob Hi Rob, Thanks for your review and sorry for the late response. We have internal discussion and we agree with that this feature should not be specific to the PCIe controller, we need to find a common way to do this. But as the driver of dvfsrc is not finished the upstream, we don't have a better solution for now, so we would like to pull back this patch and will send another patch to disable dvfsrc by default until we find a common solution to enable it. Thanks.
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml index e7b1f9892da4..3e26c032cea9 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -96,6 +96,12 @@ properties: phys: maxItems: 1 + disable-dvfsrc-vlt-req: + description: Disable dvfsrc voltage request, if this property is presented, + we assume that the requested voltage is always higher enough to keep + the PCIe controller active. + type: boolean + '#interrupt-cells': const: 1 @@ -166,6 +172,8 @@ examples: <&infracfg_rst 3>; reset-names = "phy", "mac"; + disable-dvfsrc-vlt-req; + #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &pcie_intc 0>,
Add property to disable dvfsrc voltage request, if this property is presented, we assume that the requested voltage is always higher enough to keep the PCIe controller active. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> --- .../devicetree/bindings/pci/mediatek-pcie-gen3.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)