diff mbox series

[v7,6/7] PCI: mediatek-gen3: Add system PM support

Message ID 20210113114001.5804-7-jianjun.wang@mediatek.com
State New
Headers show
Series PCI: mediatek: Add new generation controller support | expand

Commit Message

Jianjun Wang (王建军) Jan. 13, 2021, 11:40 a.m. UTC 
Add suspend_noirq and resume_noirq callback functions to implement
PM system suspend hooks for MediaTek Gen3 PCIe controller.

When system suspend, trigger the PCIe link to L2 state and pull down
the PERST# pin, gating the clocks of MAC layer and power off the
physical layer for the sake of power saving.

When system resum, the PCIe link should be re-established and the
related control register values should be restored.

Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek-gen3.c | 78 +++++++++++++++++++++
 1 file changed, 78 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 152820f28da1..ac6c43cea575 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -49,6 +49,9 @@ 
 #define PCIE_PE_RSTB			BIT(3)
 
 #define PCIE_LTSSM_STATUS_REG		0x150
+#define PCIE_LTSSM_STATE_MASK		GENMASK(28, 24)
+#define PCIE_LTSSM_STATE(val)		((val & PCIE_LTSSM_STATE_MASK) >> 24)
+#define PCIE_LTSSM_STATE_L2_IDLE	0x14
 
 #define PCIE_LINK_STATUS_REG		0x154
 #define PCIE_PORT_LINKUP		BIT(8)
@@ -76,6 +79,9 @@ 
 #define PCIE_MSI_SET_ADDR_HI_BASE	0xc80
 #define PCIE_MSI_SET_ADDR_HI_OFFSET	0x04
 
+#define PCIE_ICMD_PM_REG		0x198
+#define PCIE_TURN_OFF_LINK		BIT(4)
+
 #define PCIE_TRANS_TABLE_BASE_REG	0x800
 #define PCIE_ATR_SRC_ADDR_MSB_OFFSET	0x4
 #define PCIE_ATR_TRSL_ADDR_LSB_OFFSET	0x8
@@ -869,6 +875,77 @@  static int mtk_pcie_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused mtk_pcie_turn_off_link(struct mtk_pcie_port *port)
+{
+	u32 val;
+
+	val = readl_relaxed(port->base + PCIE_ICMD_PM_REG);
+	val |= PCIE_TURN_OFF_LINK;
+	writel_relaxed(val, port->base + PCIE_ICMD_PM_REG);
+
+	/* Check the link is L2 */
+	return readl_poll_timeout(port->base + PCIE_LTSSM_STATUS_REG, val,
+				  (PCIE_LTSSM_STATE(val) ==
+				   PCIE_LTSSM_STATE_L2_IDLE), 20,
+				   50 * USEC_PER_MSEC);
+}
+
+static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
+{
+	struct mtk_pcie_port *port = dev_get_drvdata(dev);
+	int err;
+	u32 val;
+
+	/* Trigger link to L2 state */
+	err = mtk_pcie_turn_off_link(port);
+	if (err) {
+		dev_err(port->dev, "can not enter L2 state\n");
+		return err;
+	}
+
+	/* Pull down the PERST# pin */
+	val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
+	val |= PCIE_PE_RSTB;
+	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
+
+	dev_dbg(port->dev, "enter L2 state success");
+
+	clk_bulk_disable_unprepare(port->num_clks, port->clks);
+
+	phy_power_off(port->phy);
+
+	return 0;
+}
+
+static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
+{
+	struct mtk_pcie_port *port = dev_get_drvdata(dev);
+	int err;
+
+	phy_power_on(port->phy);
+
+	err = clk_bulk_prepare_enable(port->num_clks, port->clks);
+	if (err) {
+		dev_dbg(dev, "failed to enable PCIe clocks\n");
+		return err;
+	}
+
+	err = mtk_pcie_startup_port(port);
+	if (err) {
+		dev_err(port->dev, "resume failed\n");
+		return err;
+	}
+
+	dev_dbg(port->dev, "resume done\n");
+
+	return 0;
+}
+
+static const struct dev_pm_ops mtk_pcie_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
+				      mtk_pcie_resume_noirq)
+};
+
 static const struct of_device_id mtk_pcie_of_match[] = {
 	{ .compatible = "mediatek,mt8192-pcie" },
 	{},
@@ -880,6 +957,7 @@  static struct platform_driver mtk_pcie_driver = {
 	.driver = {
 		.name = "mtk-pcie",
 		.of_match_table = mtk_pcie_of_match,
+		.pm = &mtk_pcie_pm_ops,
 	},
 };