diff mbox series

[01/19] thunderbolt: Optimize Force Power logic

Message ID 20200819115905.59834-2-mika.westerberg@linux.intel.com
State New
Headers show
Series thunderbolt: Power Management improvements | expand

Commit Message

Mika Westerberg Aug. 19, 2020, 11:58 a.m. UTC 
From: Rajmohan Mani <rajmohan.mani@intel.com>

Currently the "Force Power" logic uses 10 retries, each with a delay of
250 ms. Thunderbolt controllers in Ice Lake and Tiger Lake platforms are
found to complete this in the order of 3 ms or so. Since this delay
is in resume path, surplus delay is effectively affecting runtime PM
resume flows.

Decrease the granularity of the delay to 3 ms and increase the number of
retries so we wait maximum of ~1 s which is the recommended timeout.
This should make runtime resume a bit faster.

Reported-by: Dana Alkattan <dana.alkattan@intel.com>
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/nhi_ops.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thunderbolt/nhi_ops.c b/drivers/thunderbolt/nhi_ops.c
index 6795851aac95..c0d5ccbb10f5 100644
--- a/drivers/thunderbolt/nhi_ops.c
+++ b/drivers/thunderbolt/nhi_ops.c
@@ -59,7 +59,7 @@  static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
 	pci_write_config_dword(nhi->pdev, VS_CAP_22, vs_cap);
 
 	if (power) {
-		unsigned int retries = 10;
+		unsigned int retries = 350;
 		u32 val;
 
 		/* Wait until the firmware tells it is up and running */
@@ -67,7 +67,7 @@  static int icl_nhi_force_power(struct tb_nhi *nhi, bool power)
 			pci_read_config_dword(nhi->pdev, VS_CAP_9, &val);
 			if (val & VS_CAP_9_FW_READY)
 				return 0;
-			msleep(250);
+			usleep_range(3000, 3100);
 		} while (--retries);
 
 		return -ETIMEDOUT;