From patchwork Mon Feb 27 19:07:17 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 733054 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 3vXB8d73dxz9s8W for ; Tue, 28 Feb 2017 06:09:21 +1100 (AEDT) Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="hcDXum8T"; dkim-atps=neutral Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751478AbdB0TJR (ORCPT ); Mon, 27 Feb 2017 14:09:17 -0500 Received: from mail-lf0-f54.google.com ([209.85.215.54]:34267 "EHLO mail-lf0-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751468AbdB0TIy (ORCPT ); Mon, 27 Feb 2017 14:08:54 -0500 Received: by mail-lf0-f54.google.com with SMTP id k202so23730681lfe.1 for ; Mon, 27 Feb 2017 11:07:35 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id; bh=OLTgf0IehPr1dm9e/gLE2gQFUemmwnBXpZBvlCSy44Y=; b=hcDXum8ThyvQhR9u2ZZRMiTEvM2/NzMgFvaXVQWgDKJHO1vOmIXprRUwgWh9EFtqdX ExnIZxqAJY3yRlmhgr/0sGN/hvJiLNhASpepAeZHkxbZDEZIqB7Nyp3zdrTFCK2TBKv3 3sXmzmhUUjrFcUQSWSK4rettGJ6j5beMLLxCg= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=OLTgf0IehPr1dm9e/gLE2gQFUemmwnBXpZBvlCSy44Y=; b=nncSZh17U6x7GRoc8LdU6PYIOXPyyGEcp8Xt1/DblmtSShmaKlm9V1za7yL9kkSb0t 6jBUesKvcRqJboiWfuiJDC75xqhbumlA2L0hoBC2MVNmgJ/5LVPIg8DQRSTxpDA+NuQr 4x8VbJEECTgV6ntxDDzx1f9YJW+8qo/BuXKGawPUPeec5WkNY+J1EpwO9HLr14o3ACTb VjCMgS/X1FtkNhAF1uVlOayn0O8p0UwVthVU6sceQNVjpaRQkUG1qrdPdW/9UCRFJW+8 +i1e603cdDyXHiQWwbKse/pW9zGSpZt+lsP2f3KR1HDClorQb+sDAEBdCnPqFSGPKh9I 2KBA== X-Gm-Message-State: AMke39kTXHIU6QU1/33bkBbmqDoroGAy2jJK//wuHNwql3X7yJTfLE+BABM+aSLw8Qbw7yDK X-Received: by 10.25.25.80 with SMTP id 77mr1205245lfz.64.1488222454325; Mon, 27 Feb 2017 11:07:34 -0800 (PST) Received: from localhost.localdomain (c-357171d5.014-348-6c756e10.cust.bredbandsbolaget.se. [213.113.113.53]) by smtp.gmail.com with ESMTPSA id a63sm4022244lfa.61.2017.02.27.11.07.32 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 27 Feb 2017 11:07:33 -0800 (PST) From: Linus Walleij To: Hans Ulli Kroll , Florian Fainelli , Rob Herring , devicetree@vger.kernel.org, Bjorn Helgaas Cc: Janos Laube , Paulius Zaleckas , openwrt-devel@openwrt.org, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Linus Walleij , Feng-Hsin Chiang , Greentime Hu Subject: [PATCH 1/4 v3] PCI: add DT bindings for Faraday Technology PCI Host Bridge Date: Mon, 27 Feb 2017 20:07:17 +0100 Message-Id: <20170227190720.31409-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.9.3 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org This adds device tree bindings for the Faraday technology PCI Host Bridge. This IP is found in the Storlink/Storm/Cortina Gemini SoC platform. Cc: Janos Laube Cc: Paulius Zaleckas Cc: Hans Ulli Kroll Cc: Florian Fainelli Cc: devicetree@vger.kernel.org Cc: Feng-Hsin Chiang Cc: Greentime Hu Signed-off-by: Linus Walleij Acked-by: Rob Herring --- ChangeLog v2->v3: - Reinstate the specific-to-generic bindings also specifying the "cortina,gemini-pci" fixture for the Faraday block. - Set compatible to "faraday,ftpci100" and "faraday,ftpci100-dual" this is clearly closer to or equal to what the IP blocks from Faraday are actually named. - Add "dma-ranges" property, after deciphering that some hardcoded constants in the driver is really about this. ChangeLog v1->v2: - Rename from Cortina prefixes to Faraday. This is clearly a Faraday IP block. - Support both the version with cascaded interrupts and the "dual" version with 1-to-1 mapped interrupts. - Change bus-range to <0x00 0xff> - Fix spelling mistake - Write a bit about swizzling interrupts on the interrupt controller side - Reasonable swizzling in the interrupt mapping example This can be merged to the PCI tree whenever it is considered fine for inclusion. --- .../devicetree/bindings/pci/faraday,ftpci100.txt | 129 +++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/faraday,ftpci100.txt diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt new file mode 100644 index 000000000000..35d4a979bb7b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.txt @@ -0,0 +1,129 @@ +Faraday Technology FTPCI100 PCI Host Bridge + +This PCI bridge is found inside that Cortina Systems Gemini SoC platform and +is a generic IP block from Faraday Technology. It exists in two variants: +plain and dual PCI. The plain version embeds a cascading interrupt controller +into the host bridge. The dual version routes the interrupts to the host +chips interrupt controller. + +The host controller appear on the PCI bus with vendor ID 0x159b (Faraday +Technology) and product ID 0x4321. + +Mandatory properties: + +- compatible: ranging from specific to generic, should be one of + "cortina,gemini-pci", "faraday,ftpci100" + "cortina,gemini-pci-dual", "faraday,ftpci100-dual" + "faraday,ftpci100" + "faraday,ftpci100-dual" +- reg: memory base and size for the host bridge +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- bus-range: set to <0x00 0xff> +- device_type, set to "pci" +- ranges: see pci.txt +- interrupt-map-mask: see pci.txt +- interrupt-map: see pci.txt +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, + 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as + pre-fetchable. + +Mandatory subnodes: +- For "faraday,ftpci100" a node representing the interrupt-controller inside the + host bridge is mandatory. It has the following mandatory properties: + - interrupt: see interrupt-controller/interrupts.txt + - interrupt-parent: see interrupt-controller/interrupts.txt + - interrupt-controller: see interrupt-controller/interrupts.txt + - #address-cells: set to <0> + - #interrupt-cells: set to <1> + +I/O space considerations: + +The plain variant has 128MiB of non-prefetchable memory space, whereas the +"dual" variant has 64MiB. Take this into account when describing the ranges. + +Interrupt map considerations: + +The "dual" variant will get INT A, B, C, D from the system interrupt controller +and should point to respective interrupt in that controller in its +interrupt-map. + +The code which is the only documentation of how the Faraday PCI (the non-dual +variant) interrupts assigns the default interrupt mapping/swizzling has +typically been like this, doing the swizzling on the interrupt controller side +rather than in the interconnect: + +interrupt-map-mask = <0xf800 0 0 7>; +interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + +Example: + +pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + reg = <0x50000000 0x100>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */ + <26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */ + <27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */ + <28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */ + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x00 0xff>; + ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 0>, + <0x6000 0 0 4 &pci_intc 0>; + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; +};