diff mbox series

[v17,01/12] PCI/ERR: Update error status after reset_link()

Message ID 15e702a33cc27314f9d43a06ccb408086a229cef.1583286655.git.sathyanarayanan.kuppuswamy@linux.intel.com
State New
Headers show
Series Add Error Disconnect Recover (EDR) support | expand

Commit Message

Kuppuswamy, Sathyanarayanan March 4, 2020, 2:36 a.m. UTC
From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>

Commit bdb5ac85777d ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors. But during fatal error
recovery, if the initial value of error status is
even after successful recovery (using reset_link()) pcie_do_recovery()
will report the recovery result as failure. So update the status of
error after reset_link().

You can reproduce this issue by triggering a SW DPC using "DPC
Software Trigger" bit in "DPC Control Register". You should see recovery
failed dmesg log as below.

[  164.659982] pcieport 0000:00:16.0: DPC: containment event,
status:0x1f27 source:0x0000
[  164.659989] pcieport 0000:00:16.0: DPC: software trigger detected
[  164.659994] pci 0000:04:00.0: AER: can't recover (no error_detected
[  164.794300] pcieport 0000:00:16.0: AER: device recovery failed

Fixes: bdb5ac85777d ("PCI/ERR: Handle fatal error recovery")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
 drivers/pci/pcie/err.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series


diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 01dfc8bb7ca0..eefefe03857a 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -208,9 +208,11 @@  void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 		pci_walk_bus(bus, report_normal_detected, &status);
-	if (state == pci_channel_io_frozen &&
-	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
-		goto failed;
+	if (state == pci_channel_io_frozen) {
+		status = reset_link(dev, service);
+		if (status != PCI_ERS_RESULT_RECOVERED)
+			goto failed;
+	}
 	if (status == PCI_ERS_RESULT_CAN_RECOVER) {