| Message ID | 1477347432-17656-8-git-send-email-ray.jui@broadcom.com |
|---|---|
| State | Superseded |
| Headers | show |
2 spelling typos On 16-10-24 03:17 PM, Ray Jui wrote: > Remove the following outbound related device tree properties: > brcm,pcie-ob-window-size > brcm,pcie-ob-oarr-size > > The above two prperties are a bit duplicated in functions. In addition, properties typo > the next generation iProc PCIe controller has outbound mapping window that > supports more than just two sizes, which cannot be properly supported by > these properties > > A better solution is to make the driver outbound mapping logic slightly > more inteligent so it can figure out how to configure the outbound mapping intelligent typo > based on the 'ranges' specified in device tree and the number and sizes > of the outbound mapping windows that a particular revision of the iProc > PCIe controller can support > > Signed-off-by: Ray Jui <ray.jui@broadcom.com> > Reviewed-by: Scott Branden <scott.branden@broadcom.com> > --- > Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 7 ------- > 1 file changed, 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > index 071bbc2..f827b8d 100644 > --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > @@ -35,11 +35,6 @@ effective: > Required: > - brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal > address used by the iProc PCIe core (not the PCIe address) > -- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) > - > -Optional: > -- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to > -increase the outbound window size > > MSI support (optional): > > @@ -95,9 +90,7 @@ Example: > phy-names = "pcie-phy"; > > brcm,pcie-ob; > - brcm,pcie-ob-oarr-size; > brcm,pcie-ob-axi-offset = <0x00000000>; > - brcm,pcie-ob-window-size = <256>; > > msi-parent = <&msi0>; > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks! Will address both typos in the next revision. Waiting for feedback from Bjorn before sending out the next revision. Ray On 10/24/2016 3:24 PM, Scott Branden wrote: > 2 spelling typos > > On 16-10-24 03:17 PM, Ray Jui wrote: >> Remove the following outbound related device tree properties: >> brcm,pcie-ob-window-size >> brcm,pcie-ob-oarr-size >> >> The above two prperties are a bit duplicated in functions. In addition, > properties typo >> the next generation iProc PCIe controller has outbound mapping window >> that >> supports more than just two sizes, which cannot be properly supported by >> these properties >> >> A better solution is to make the driver outbound mapping logic slightly >> more inteligent so it can figure out how to configure the outbound >> mapping > intelligent typo >> based on the 'ranges' specified in device tree and the number and sizes >> of the outbound mapping windows that a particular revision of the iProc >> PCIe controller can support >> >> Signed-off-by: Ray Jui <ray.jui@broadcom.com> >> Reviewed-by: Scott Branden <scott.branden@broadcom.com> >> --- >> Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 7 ------- >> 1 file changed, 7 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt >> b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt >> index 071bbc2..f827b8d 100644 >> --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt >> @@ -35,11 +35,6 @@ effective: >> Required: >> - brcm,pcie-ob-axi-offset: The offset from the AXI address to the >> internal >> address used by the iProc PCIe core (not the PCIe address) >> -- brcm,pcie-ob-window-size: The outbound address mapping window size >> (in MB) >> - >> -Optional: >> -- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to >> be set to >> -increase the outbound window size >> >> MSI support (optional): >> >> @@ -95,9 +90,7 @@ Example: >> phy-names = "pcie-phy"; >> >> brcm,pcie-ob; >> - brcm,pcie-ob-oarr-size; >> brcm,pcie-ob-axi-offset = <0x00000000>; >> - brcm,pcie-ob-window-size = <256>; >> >> msi-parent = <&msi0>; >> >> -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index 071bbc2..f827b8d 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -35,11 +35,6 @@ effective: Required: - brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal address used by the iProc PCIe core (not the PCIe address) -- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) - -Optional: -- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to -increase the outbound window size MSI support (optional): @@ -95,9 +90,7 @@ Example: phy-names = "pcie-phy"; brcm,pcie-ob; - brcm,pcie-ob-oarr-size; brcm,pcie-ob-axi-offset = <0x00000000>; - brcm,pcie-ob-window-size = <256>; msi-parent = <&msi0>;