@@ -475,6 +475,48 @@ static const struct pci_vpd_ops pci_vpd_f0_ops = {
.release = pci_vpd_pci22_release,
};
+/**
+ * pci_vpd_size - determine actual size of Vital Product Data
+ * @dev: pci device struct
+ * @old_size: current assumed size, also maximum allowed size
+ *
+ */
+static size_t
+pci_vpd_pci22_size(struct pci_dev *dev, size_t old_size)
+{
+ size_t off = 0;
+ unsigned char header[1+2]; /* 1 byte tag, 2 bytes length */
+
+ while (off < old_size && pci_read_vpd(dev, off, 1, header)) {
+ unsigned char tag;
+
+ if (header[0] == 0xff) {
+ /* Invalid data from VPD read */
+ tag = header[0];
+ } else if (header[0] & 0x80) {
+ /* Large Resource Data Type Tag */
+ if (pci_read_vpd(dev, off+1, 2, &header[1]) != 2)
+ return off + 1;
+ off += 3 + ((header[2] << 8) | header[1]);
+ tag = (header[0] & 0x7f);
+ } else {
+ /* Short Resource Data Type Tag */
+ off += 1 + (header[0] & 0x07);
+ tag = (header[0] & 0x78) >> 3;
+ }
+ if (tag == 0x0f) /* End tag descriptor */
+ break;
+ if ((tag != 0x02) && (tag != 0x10) && (tag != 0x11)) {
+ dev_debug(&dev->dev,
+ "invalid %s vpd tag %02x at offset %zu.",
+ header[0] & 0x80 ? "large" : "short",
+ tag, off);
+ break;
+ }
+ }
+ return off;
+}
+
int pci_vpd_pci22_init(struct pci_dev *dev)
{
struct pci_vpd_pci22 *vpd;
@@ -497,6 +539,13 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
vpd->cap = cap;
vpd->busy = false;
dev->vpd = &vpd->base;
+ vpd->base.len = pci_vpd_pci22_size(dev, vpd->base.len);
+ if (vpd->base.len == 0) {
+ dev_debug(&dev->dev, "Disabling VPD access.");
+ dev->vpd = NULL;
+ kfree(vpd);
+ return -ENXIO;
+ }
return 0;
}
PCI-2.2 VPD entries have a maximum size of 32k, but might actually be smaller than that. To figure out the actual size one has to read the VPD area until the 'end marker' is reached. Trying to read VPD data beyond that marker results in 'interesting' effects, from simple read errors to crashing the card. And to make matters worse not every PCI card implements this properly, leaving us with no 'end' marker or even completely invalid data. This path modifies the size of the VPD attribute to the available size, and disables the VPD attribute altogether if no valid data could be read. Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Cc: Michal Kubecek <mkubecek@suse.com> Signed-off-by: Hannes Reinecke <hare@suse.de> --- drivers/pci/access.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)