| Message ID | 1445859350-26375-8-git-send-email-wangzhou1@hisilicon.com |
|---|---|
| State | Changes Requested |
| Headers | show |
On Mon, Oct 26, 2015 at 6:35 AM, Zhou Wang <wangzhou1@hisilicon.com> wrote: > This patch adds related DTS binding document for HiSilicon PCIe host driver. > > Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Rob Herring <robh@kernel.org> > --- > .../bindings/arm/hisilicon/hisilicon.txt | 17 +++++++++ > .../devicetree/bindings/pci/hisilicon-pcie.txt | 44 ++++++++++++++++++++++ > 2 files changed, 61 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > index 3504dca..6ac7c00 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -171,6 +171,23 @@ Example: > }; > > ----------------------------------------------------------------------- > +Hisilicon HiP05 PCIe-SAS system controller > + > +Required properties: > +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; > +- reg : Register address and size > + > +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in > +HiP05 Soc to implement some basic configurations. > + > +Example: > + /* for HiP05 PCIe-SAS system */ > + pcie_sas: system_controller@0xb0000000 { > + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; > + reg = <0xb0000000 0x10000>; > + }; > + > +----------------------------------------------------------------------- > Hisilicon CPU controller > > Required properties: > diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > new file mode 100644 > index 0000000..17c6ed9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt > @@ -0,0 +1,44 @@ > +HiSilicon PCIe host bridge DT description > + > +HiSilicon PCIe host controller is based on Designware PCI core. > +It shares common functions with PCIe Designware core driver and inherits > +common properties defined in > +Documentation/devicetree/bindings/pci/designware-pci.txt. > + > +Additional properties are described here: > + > +Required properties: > +- compatible: Should contain "hisilicon,hip05-pcie". > +- reg: Should contain rc_dbi, config registers location and length. > +- reg-names: Must include the following entries: > + "rc_dbi": controller configuration registers; > + "config": PCIe configuration space registers. > +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. > +- port-id: Should be 0, 1, 2 or 3. > + > +Optional properties: > +- status: Either "ok" or "disabled". > +- dma-coherent: Present if DMA operations are coherent. > + > +Example: > + pcie@0xb0080000 { > + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; > + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; > + reg-names = "rc_dbi", "config"; > + bus-range = <0 15>; > + msi-parent = <&its_pcie>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + dma-coherent; > + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; > + num-lanes = <8>; > + port-id = <1>; > + #interrupts-cells = <1>; > + interrupts-map-mask = <0xf800 0 0 7>; > + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 > + 0x0 0 0 2 &mbigen_pcie 2 11 > + 0x0 0 0 3 &mbigen_pcie 3 12 > + 0x0 0 0 4 &mbigen_pcie 4 13>; > + status = "ok"; > + }; > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2015/10/28 3:19, Rob Herring wrote: > On Mon, Oct 26, 2015 at 6:35 AM, Zhou Wang <wangzhou1@hisilicon.com> wrote: >> This patch adds related DTS binding document for HiSilicon PCIe host driver. >> >> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> > > Acked-by: Rob Herring <robh@kernel.org> > Thanks for your review. Zhou >> --- >> .../bindings/arm/hisilicon/hisilicon.txt | 17 +++++++++ >> .../devicetree/bindings/pci/hisilicon-pcie.txt | 44 ++++++++++++++++++++++ >> 2 files changed, 61 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt >> >> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> index 3504dca..6ac7c00 100644 >> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> @@ -171,6 +171,23 @@ Example: >> }; >> >> ----------------------------------------------------------------------- >> +Hisilicon HiP05 PCIe-SAS system controller >> + >> +Required properties: >> +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; >> +- reg : Register address and size >> + >> +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in >> +HiP05 Soc to implement some basic configurations. >> + >> +Example: >> + /* for HiP05 PCIe-SAS system */ >> + pcie_sas: system_controller@0xb0000000 { >> + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; >> + reg = <0xb0000000 0x10000>; >> + }; >> + >> +----------------------------------------------------------------------- >> Hisilicon CPU controller >> >> Required properties: >> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt >> new file mode 100644 >> index 0000000..17c6ed9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt >> @@ -0,0 +1,44 @@ >> +HiSilicon PCIe host bridge DT description >> + >> +HiSilicon PCIe host controller is based on Designware PCI core. >> +It shares common functions with PCIe Designware core driver and inherits >> +common properties defined in >> +Documentation/devicetree/bindings/pci/designware-pci.txt. >> + >> +Additional properties are described here: >> + >> +Required properties: >> +- compatible: Should contain "hisilicon,hip05-pcie". >> +- reg: Should contain rc_dbi, config registers location and length. >> +- reg-names: Must include the following entries: >> + "rc_dbi": controller configuration registers; >> + "config": PCIe configuration space registers. >> +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. >> +- port-id: Should be 0, 1, 2 or 3. > > >> + >> +Optional properties: >> +- status: Either "ok" or "disabled". >> +- dma-coherent: Present if DMA operations are coherent. >> + >> +Example: >> + pcie@0xb0080000 { >> + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; >> + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; >> + reg-names = "rc_dbi", "config"; >> + bus-range = <0 15>; >> + msi-parent = <&its_pcie>; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + device_type = "pci"; >> + dma-coherent; >> + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; >> + num-lanes = <8>; >> + port-id = <1>; >> + #interrupts-cells = <1>; >> + interrupts-map-mask = <0xf800 0 0 7>; >> + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 >> + 0x0 0 0 2 &mbigen_pcie 2 11 >> + 0x0 0 0 3 &mbigen_pcie 3 12 >> + 0x0 0 0 4 &mbigen_pcie 4 13>; >> + status = "ok"; >> + }; >> -- >> 1.9.1 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe devicetree" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > . > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 3504dca..6ac7c00 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -171,6 +171,23 @@ Example: }; ----------------------------------------------------------------------- +Hisilicon HiP05 PCIe-SAS system controller + +Required properties: +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; +- reg : Register address and size + +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in +HiP05 Soc to implement some basic configurations. + +Example: + /* for HiP05 PCIe-SAS system */ + pcie_sas: system_controller@0xb0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0xb0000000 0x10000>; + }; + +----------------------------------------------------------------------- Hisilicon CPU controller Required properties: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 0000000..17c6ed9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,44 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + };
This patch adds related DTS binding document for HiSilicon PCIe host driver. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> --- .../bindings/arm/hisilicon/hisilicon.txt | 17 +++++++++ .../devicetree/bindings/pci/hisilicon-pcie.txt | 44 ++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/hisilicon-pcie.txt