[12/18] Delayed mn10300 setup of PCI IRQs to bus scan time

From: Matthew Minter <matt@masarand.com>


PCI IRQs are being asigned during pcibios_irq_init currently, this causes
a problem by which hot-plug devices connected after boot will not recieve
an IRQ, this patch-set fixes this by registering the IRQ assignment
functions at boot, to then be called later by the device enable code.

Signed-off-by: Matthew Minter <matt@masarand.com>

---
 arch/mn10300/unit-asb2305/pci-asb2305.h |  5 +----
 arch/mn10300/unit-asb2305/pci-irq.c     | 25 +++++--------------------
 arch/mn10300/unit-asb2305/pci.c         | 21 ++++++++-------------
 3 files changed, 14 insertions(+), 37 deletions(-)

On Thu, Oct 02, 2014 at 05:07:40AM +0100, matt@masarand.com wrote:
> From: Matthew Minter <matt@masarand.com>
> 
> 
> PCI IRQs are being asigned during pcibios_irq_init currently, this causes
> a problem by which hot-plug devices connected after boot will not recieve
> an IRQ, this patch-set fixes this by registering the IRQ assignment
> functions at boot, to then be called later by the device enable code.
> 
> Signed-off-by: Matthew Minter <matt@masarand.com>
> 
> ---
>  arch/mn10300/unit-asb2305/pci-asb2305.h |  5 +----
>  arch/mn10300/unit-asb2305/pci-irq.c     | 25 +++++--------------------
>  arch/mn10300/unit-asb2305/pci.c         | 21 ++++++++-------------
>  3 files changed, 14 insertions(+), 37 deletions(-)
> 
> diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
> index 9e17aca..fb520cf 100644
> --- a/arch/mn10300/unit-asb2305/pci-asb2305.h
> +++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
> @@ -67,9 +67,6 @@ struct irq_routing_table {
>  } __attribute__((packed));
>  
>  extern unsigned int pcibios_irq_mask;
> -
> -extern void pcibios_irq_init(void);
> -extern void pcibios_fixup_irqs(void);
> -extern void pcibios_enable_irq(struct pci_dev *dev);
> +extern int pci_map_irq(struct pci_dev *, u8 slot, u8 pin);
>  
>  #endif /* PCI_ASB2305_H */
> diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c
> index fcb28ce..5be6fea 100644
> --- a/arch/mn10300/unit-asb2305/pci-irq.c
> +++ b/arch/mn10300/unit-asb2305/pci-irq.c
> @@ -20,27 +20,12 @@
>  #include <asm/smp.h>
>  #include "pci-asb2305.h"
>  
> -void __init pcibios_irq_init(void)
> +int pci_map_irq(struct pci_dev *, u8 slot, u8 pin)
>  {
> -}
> -
> -void __init pcibios_fixup_irqs(void)
> -{
> -	struct pci_dev *dev = NULL;
> -	u8 line, pin;
> +	u8 line;
>  
> -	for_each_pci_dev(dev) {
> -		pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
> -		if (pin) {
> -			dev->irq = XIRQ1;
> -			pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
> -					      dev->irq);
> -		}
> -		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
> -	}
> -}
> -
> -void pcibios_enable_irq(struct pci_dev *dev)
> -{
> +	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
> +	dev->irq = XIRQ1;
>  	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
> +	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
>  }
> diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c
> index 6b4339f..22f8786 100644
> --- a/arch/mn10300/unit-asb2305/pci.c
> +++ b/arch/mn10300/unit-asb2305/pci.c
> @@ -377,13 +377,18 @@ static int __init pcibios_init(void)
>  	pci_add_resource_offset(&resources, &pci_ioport_resource, io_offset);
>  	pci_add_resource_offset(&resources, &pci_iomem_resource, mem_offset);
>  	pci_scan_root_bus(NULL, 0, &pci_direct_ampci, NULL, &resources);
> -
> -	pcibios_irq_init();
> -	pcibios_fixup_irqs();
>  	pcibios_resource_survey();
>  	return 0;
>  }
>  
> +int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
> +{
> +	bridge->swizzle_irq = NULL;
> +	bridge->map_irq = pci_map_irq;

I would lean toward omitting the "= NULL" initializations here and
elsewhere, because it will make git grep and cscope searches for
swizzle_irq more useful because they will show only the arches that
actually need it.  But it's fine either way.

> +	return 0;
> +}
> +
> +
>  arch_initcall(pcibios_init);
>  
>  char *__init pcibios_setup(char *str)
> @@ -396,16 +401,6 @@ char *__init pcibios_setup(char *str)
>  	return str;
>  }
>  
> -int pcibios_enable_device(struct pci_dev *dev, int mask)
> -{
> -	int err;
> -
> -	err = pci_enable_resources(dev, mask);
> -	if (err == 0)
> -		pcibios_enable_irq(dev);
> -	return err;

I would personally do this as two patches -- one that does the IRQ change,
and a second that drops the pcibios_enable_device() implementation because
it is now the same as the default one in drivers/pci/pci.c.  That way it's
clear that there really two logical changes happening here and reviewers
can easily verify that the two pcibios_enable_device() implementations are
identical.

> -}
> -
>  /*
>   * disable the ethernet chipset
>   */
> -- 
> 2.1.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html